← Commit history
page.json+7−4@@ -50,13 +50,13 @@ "number": "4", "name": "VIN", "type": "power_in",- "description": "Power input pin. Operating range 7 V to 30 V (abs max 33 V); over-voltage protection engages at 32 V. Bypass with a low-ESR input capacitor (e.g. 100 \u00b5F / 35 V) placed close to the pin."+ "description": "Power input pin. Operating range 7 V to 30 V (abs max 33 V); over-voltage protection engages at 32 V. Bypass with a low-ESR input capacitor (e.g. 100 µF / 35 V) placed close to the pin." }, { "number": "5", "name": "SW", "type": "output",- "description": "Switching node, output of the integrated high-side (75 m\u03a9) and low-side (35 m\u03a9) power MOSFETs. Connect to the external inductor. Pins 5 and 6 are tied internally to the same SW node."+ "description": "Switching node, output of the integrated high-side (75 mΩ) and low-side (35 mΩ) power MOSFETs. Connect to the external inductor. Pins 5 and 6 are tied internally to the same SW node." }, { "number": "6",@@ -68,7 +68,7 @@ "number": "7", "name": "FS", "type": "input",- "description": "Switching-frequency programming pin. Float for 130 kHz; connect an external resistor to GND to set frequency up to 300 kHz (e.g. 470 k\u03a9 \u2192 300 kHz, 1 M\u03a9 \u2192 220 kHz, 2 M\u03a9 \u2192 180 kHz). Pulling FS below 0.3 V puts the part into a low-current shutdown state."+ "description": "Switching-frequency programming pin. Float for 130 kHz; connect an external resistor to GND to set frequency up to 300 kHz (e.g. 470 kΩ → 300 kHz, 1 MΩ → 220 kHz, 2 MΩ → 180 kHz). Pulling FS below 0.3 V puts the part into a low-current shutdown state." }, { "number": "8",@@ -138,5 +138,8 @@ "docs/ndp1331kc-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }