← Commit history

Initial commit: component/ncv7341d21r2g

Ray ·a7e5d4f31b ·
2 files changed +90
README.mdadded+56
@@ -0,0 +1,56 @@+# NCV7341D21R2G++**onsemi** · CAN Controllers · SOIC-14++NCV7341D21R2G from onsemi, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | TxD | input | Transmit data input from the CAN controller. Low level drives a dominant state on the bus; has an internal pull-up current so the pin defaults high (recessive) if disconnected. A TxD dominant time-out disables the transmitter after tdom(TxD) = 300-1000 us to prevent bus lockup. |+| 2 | GND | power_in | Ground reference for the device. All voltages in the datasheet are referenced to GND (Pin 2). |+| 3 | VCC | power_in | Supply voltage for the core circuitry and the CAN transceiver output stage. Operating range 4.75 V to 5.25 V; absolute max +7 V. |+| 4 | RxD | output | Receive data output to the CAN controller. Dominant bus state produces a low output; recessive bus state produces a high output. Output levels are referenced to VIO for controller interface flexibility. |+| 5 | VIO | power_in | Supply voltage for the digital interface to the CAN controller / microcontroller, allowing interfacing to controllers with 3 V or 5 V I/O. Operating range 2.8 V to 5.25 V; absolute max +7 V. |+| 6 | EN | input | Enable / mode-control input (together with STB selects Normal, Receive-only, Standby, Go-to-Sleep, or Sleep modes). Has an internal pull-down current so pin defaults low if disconnected. Levels referenced to VIO. |+| 7 | INH | output | High-voltage inhibit output for controlling external voltage regulators. Pulled high (near VBAT, with typ 200 mV drop at 180 uA) in Normal/Receive-only/Standby/Go-to-Sleep modes; floats in Sleep mode to switch off the external regulators. Rated up to VBAT+0.3 V. |+| 8 | ERR | output | Active-low digital output that indicates internal flag conditions (power-up, wake-up, failure, and bus failure on the D20 version). Uses negative logic - pulled low when a signaled flag is set. Levels referenced to VIO. |+| 9 | WAKE | input | Local wake-up input. A stable High-to-Low or Low-to-High transition longer than tWAKE (5-50 us) is detected as a local wake-up event in Standby/Go-to-Sleep/Sleep modes. Internal current source (~5 uA pull-up or pull-down following the pin state). Rated up to 58 V; connect to GND or VBAT if unused. |+| 10 | VBAT | power_in | Battery supply connection (12 V or 24 V systems). Operating range 5 V to 50 V (6 V to 50 V guaranteed in Sleep mode); absolute max 58 V. Supplies the low-power wake circuitry and the INH output. |+| 11 | VSPLIT | output | Common-mode stabilization output providing VCC/2 (0.3*VCC to 0.7*VCC) in Normal and Receive-only modes for use with split termination to reduce EME. High-impedance (floating) in Standby and Sleep modes. Protected against short-circuit to battery/ground; rated -58 V to +58 V DC and +/-300 V transient. |+| 12 | CANL | bidirectional | Low-level CAN bus line (driven low in dominant state, typ 1.4 V). Differential pair with CANH; rated -58 V to +58 V DC and +/-300 V transient (ISO 7637). Short-circuit protected and thermally protected. |+| 13 | CANH | bidirectional | High-level CAN bus line (driven high in dominant state, typ 3.6 V). Differential pair with CANL; rated -58 V to +58 V DC and +/-300 V transient (ISO 7637). Short-circuit protected and thermally protected. |+| 14 | STB | input | Active-low stand-by mode control input (together with EN selects operating mode). Has an internal pull-down current so pin defaults low if disconnected. Levels referenced to VIO. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | onsemi |+| Package | SOIC-14 |+| Category | Interface |+| Pins | 14 |++## Ordering variants++- `NCV7341D21R2GD21G`+- `NCV7341D21R2G`+- `NCV7341D21R2GD20G`+- `NCV7341D21R2GD20R2G`++## CAD (KiCad official)++- Symbol: `NCV7341D21R2G`+- Footprint: `Package_SO:SOIC-14_3.9x8.7mm_P1.27mm`+- 3D model: SOIC-14 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [onsemi datasheet](https://www.onsemi.com/pdf/datasheet/ncv7341d21r2-d.pdf) (None pp, sha256 `59d663c1f4054c72`, retrieved 2026-08-17, tier: manufacturer)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ncv7341d21r2g-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "ncv7341d21r2g",+  "version": "0.1.0",+  "type": "component",+  "description": "onsemi CAN Controllers, SOIC-14. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "interface",+    "ncv7341d21r2g"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "ncv7341d21r2g.kicad_sym",+    "ncv7341d21r2g.kicad_mod",+    "ncv7341d21r2g.glb",+    "ncv7341d21r2g.step",+    "ncv7341d21r2g.lbr",+    "docs/hero.png",+    "docs/ncv7341d21r2g-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file