← Commit history

ncv7341d21r2g: restore the component block (pinout + model declarations) from this page's own README and symbol

Ray ·2894883d8d · ·parent ce5242c
1 file changed +111−1
page.json+111−1
@@ -33,5 +33,115 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "NCV7341D21R2G",+    "manufacturer": "onsemi",+    "package": "SOIC-14",+    "pin_count": 14,+    "category": "CAN Controllers",+    "datasheet": "https://www.onsemi.com/pdf/datasheet/ncv7341d21r2-d.pdf",+    "parts": {+      "symbol": "ncv7341d21r2g.kicad_sym",+      "footprint": "ncv7341d21r2g.kicad_mod",+      "model_3d": "ncv7341d21r2g-etched.glb",+      "model_3d_plain": "ncv7341d21r2g.glb",+      "model_3d_step": "ncv7341d21r2g-etched.step",+      "model_3d_step_plain": "ncv7341d21r2g.step",+      "lbr": "ncv7341d21r2g.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "TxD",+        "type": "input",+        "description": "Transmit data input from the CAN controller. Low level drives a dominant state on the bus; has an internal pull-up current so the pin defaults high (recessive) if disconnected. A TxD dominant time-out disables the transmitter after tdom(TxD) = 300-1000 us to prevent bus lockup."+      },+      {+        "number": "2",+        "name": "GND",+        "type": "power_in",+        "description": "Ground reference for the device. All voltages in the datasheet are referenced to GND (Pin 2)."+      },+      {+        "number": "3",+        "name": "VCC",+        "type": "power_in",+        "description": "Supply voltage for the core circuitry and the CAN transceiver output stage. Operating range 4.75 V to 5.25 V; absolute max +7 V."+      },+      {+        "number": "4",+        "name": "RxD",+        "type": "output",+        "description": "Receive data output to the CAN controller. Dominant bus state produces a low output; recessive bus state produces a high output. Output levels are referenced to VIO for controller interface flexibility."+      },+      {+        "number": "5",+        "name": "VIO",+        "type": "power_in",+        "description": "Supply voltage for the digital interface to the CAN controller / microcontroller, allowing interfacing to controllers with 3 V or 5 V I/O. Operating range 2.8 V to 5.25 V; absolute max +7 V."+      },+      {+        "number": "6",+        "name": "EN",+        "type": "input",+        "description": "Enable / mode-control input (together with STB selects Normal, Receive-only, Standby, Go-to-Sleep, or Sleep modes). Has an internal pull-down current so pin defaults low if disconnected. Levels referenced to VIO."+      },+      {+        "number": "7",+        "name": "INH",+        "type": "output",+        "description": "High-voltage inhibit output for controlling external voltage regulators. Pulled high (near VBAT, with typ 200 mV drop at 180 uA) in Normal/Receive-only/Standby/Go-to-Sleep modes; floats in Sleep mode to switch off the external regulators. Rated up to VBAT+0.3 V."+      },+      {+        "number": "8",+        "name": "ERR",+        "type": "output",+        "description": "Active-low digital output that indicates internal flag conditions (power-up, wake-up, failure, and bus failure on the D20 version). Uses negative logic - pulled low when a signaled flag is set. Levels referenced to VIO."+      },+      {+        "number": "9",+        "name": "WAKE",+        "type": "input",+        "description": "Local wake-up input. A stable High-to-Low or Low-to-High transition longer than tWAKE (5-50 us) is detected as a local wake-up event in Standby/Go-to-Sleep/Sleep modes. Internal current source (~5 uA pull-up or pull-down following the pin state). Rated up to 58 V; connect to GND or VBAT if unused."+      },+      {+        "number": "10",+        "name": "VBAT",+        "type": "power_in",+        "description": "Battery supply connection (12 V or 24 V systems). Operating range 5 V to 50 V (6 V to 50 V guaranteed in Sleep mode); absolute max 58 V. Supplies the low-power wake circuitry and the INH output."+      },+      {+        "number": "11",+        "name": "VSPLIT",+        "type": "output",+        "description": "Common-mode stabilization output providing VCC/2 (0.3*VCC to 0.7*VCC) in Normal and Receive-only modes for use with split termination to reduce EME. High-impedance (floating) in Standby and Sleep modes. Protected against short-circuit to battery/ground; rated -58 V to +58 V DC and +/-300 V transient."+      },+      {+        "number": "12",+        "name": "CANL",+        "type": "bidirectional",+        "description": "Low-level CAN bus line (driven low in dominant state, typ 1.4 V). Differential pair with CANH; rated -58 V to +58 V DC and +/-300 V transient (ISO 7637). Short-circuit protected and thermally protected."+      },+      {+        "number": "13",+        "name": "CANH",+        "type": "bidirectional",+        "description": "High-level CAN bus line (driven high in dominant state, typ 3.6 V). Differential pair with CANL; rated -58 V to +58 V DC and +/-300 V transient (ISO 7637). Short-circuit protected and thermally protected."+      },+      {+        "number": "14",+        "name": "STB",+        "type": "input",+        "description": "Active-low stand-by mode control input (together with EN selects operating mode). Has an internal pull-down current so pin defaults low if disconnected. Levels referenced to VIO."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}