← Commit history

Initial commit: component/ncv57001dwr2g

Ray ·30ebbb4350 ·
2 files changed +89
README.mdadded+55
@@ -0,0 +1,55 @@+# NCV57001DWR2G++**onsemi** · Isolators - Gate Drivers · SOIC-16-300mil++NCV57001DWR2G from onsemi, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VEE2A | power_in | Output-side negative power supply (mirror of VEE2). A quality bypass capacitor to GND2 close to the pin is required. Tie to GND2 for unipolar supply operation. Rated -10 V to +0.3 V vs GND2. |+| 2 | DESAT | bidirectional | Desaturation detection input for IGBT short-circuit protection. An internal I_DESAT-CHG current source charges an external blanking capacitor each ON cycle. When DESAT exceeds V_DESAT-THR the output is driven low and /FLT is asserted. A 5 us mute time applies to IN+/IN- once DESAT trips. |+| 3 | GND2 | power_in | Output-side gate-drive reference; connects to IGBT emitter or FET source. |+| 4 | N/C | unconnected | Not connected internally. Leave floating or tie to a nearby plane per PCB best practice. |+| 5 | VDD2 | power_in | Output-side positive power supply. Operating range from UVLO2 up to its maximum (25 V absolute max vs GND2). A quality bypass capacitor to GND2 placed close to the pin is required. |+| 6 | OUT | output | Gate-driver output providing source/sink drive to the IGBT/FET gate (typ +4 A / -6 A peak). Actively pulled low during start-up and under fault conditions. |+| 7 | CLAMP | bidirectional | Active Miller clamp pin that provides a low-impedance path for the IGBT/FET gate during OFF to prevent parasitic turn-on. An internal N-FET turns on when this pin drops below VEE2 + V_CLAMP-THR. Tie directly to the gate with minimum trace length. Max clamp current 2.5 A pk. |+| 8 | VEE2 | power_in | Output-side negative power supply. Tie to GND2 for unipolar operation, or bias to a negative rail (down to -10 V vs GND2) for negative gate-off drive. Requires bypass capacitor to GND2. |+| 9 | GND1 | power_in | Input-side (logic) ground reference. Both pin 9 and pin 16 are internally tied together and must be connected on the PCB. |+| 10 | IN+ | input | Non-inverting gate-driver input. Internally clamped to VDD1 with a 50 kOhm pull-down to ensure OUT is low with no input drive. Accepts 3.3 V / 5 V logic; minimum positive-going pulse width required at IN+ before OUT responds. |+| 11 | IN- | input | Inverting gate-driver input. Internally clamped to VDD1 with a 50 kOhm pull-up to ensure OUT is low with no input drive. A minimum negative-going pulse width is required at IN- before OUT responds. |+| 12 | RDY | output | Power-good (READY) indication output, active-high when VDD2 is good. Open-drain style with an internal 50 kOhm pull-up to VDD1; outputs from multiple drivers can be wired-OR. Max low-duration when triggered by UVLO2 is 200 ns; OUT stays low while RDY is low. |+| 13 | /FLT | output | Fault output (active-low) indicating that the driver has detected a DESAT condition and disabled OUT. Open-drain compatible for wired-OR with a 10 mA max sink capability. |+| 14 | /RST | input | Reset input, active-low, with an internal 50 kOhm pull-up to VDD1. Drive low to clear a latched DESAT fault. |+| 15 | VDD1 | power_in | Input-side (logic) power supply, 3.3 V to 5 V (6 V absolute max vs GND1). Bypass to GND1 with a quality decoupling capacitor. |+| 16 | GND1A | power_in | Input-side ground reference (shared with pin 9 GND1 internally). Both ground pins must be connected on the PCB. Labelled GND1A on the package pin-assignment diagram. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | onsemi |+| Package | SOIC-16-300mil |+| Category | PMIC |+| Pins | 16 |++## Ordering variants++- `NCV57001DWR2G`++## CAD (KiCad official)++- Symbol: `NCV57001DWR2G`+- Footprint: `Package_SO:SOIC-16_3.9x9.9mm_P1.27mm`+- 3D model: SOIC-16-300mil (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [onsemi datasheet](https://www.onsemi.com/pdf/datasheet/ncv57001dwr2-d.pdf) (22 pp, sha256 `c7c1197eac993e94`, retrieved 2026-08-17, tier: manufacturer)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ncv57001dwr2g-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "ncv57001dwr2g",+  "version": "0.1.0",+  "type": "component",+  "description": "onsemi Isolators - Gate Drivers, SOIC-16-300mil. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "pmic",+    "ncv57001dwr2g"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "ncv57001dwr2g.kicad_sym",+    "ncv57001dwr2g.kicad_mod",+    "ncv57001dwr2g.glb",+    "ncv57001dwr2g.step",+    "ncv57001dwr2g.lbr",+    "docs/hero.png",+    "docs/ncv57001dwr2g-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file