← Commit history

ncv57001dwr2g: factory component page (tier=mfr)

Ray ·2417775c47 · ·parent 753906b
1 file changed +164−8
page.json+164−8
@@ -1,13 +1,174 @@ {+  "schema_version": 1,+  "type": "component",   "slug": "ncv57001dwr2g",+  "title": "NCV57001DWR2G",+  "brief": "onsemi Isolators - Gate Drivers, SOIC-16-300mil. Datasheet-verified pinout, KiCad symbol/footprint/3D.",   "version": "0.1.0",-  "type": "component",-  "description": "onsemi Isolators - Gate Drivers, SOIC-16-300mil. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "license": "CC-BY-SA-4.0",   "tags": [     "component",     "pmic",     "ncv57001dwr2g"   ],+  "component": {+    "mpn": "NCV57001DWR2G",+    "manufacturer": "onsemi",+    "package": "SOIC-16-300mil",+    "pin_count": 16,+    "category": "PMIC",+    "subcategory": "Isolators - Gate Drivers",+    "datasheet": "https://www.onsemi.com/pdf/datasheet/ncv57001dwr2-d.pdf",+    "parts": {+      "symbol": "ncv57001dwr2g.kicad_sym",+      "footprint": "ncv57001dwr2g.kicad_mod",+      "model_3d": "ncv57001dwr2g.glb",+      "model_3d_step": "ncv57001dwr2g.step",+      "lbr": "ncv57001dwr2g.lbr"+    },+    "distributor_links": {},+    "pins": [+      {+        "number": "1",+        "name": "VEE2A",+        "type": "power_in",+        "description": "Output-side negative power supply (mirror of VEE2). A quality bypass capacitor to GND2 close to the pin is required. Tie to GND2 for unipolar supply operation. Rated -10 V to +0.3 V vs GND2."+      },+      {+        "number": "2",+        "name": "DESAT",+        "type": "bidirectional",+        "description": "Desaturation detection input for IGBT short-circuit protection. An internal I_DESAT-CHG current source charges an external blanking capacitor each ON cycle. When DESAT exceeds V_DESAT-THR the output is driven low and /FLT is asserted. A 5 us mute time applies to IN+/IN- once DESAT trips."+      },+      {+        "number": "3",+        "name": "GND2",+        "type": "power_in",+        "description": "Output-side gate-drive reference; connects to IGBT emitter or FET source."+      },+      {+        "number": "4",+        "name": "N/C",+        "type": "unconnected",+        "description": "Not connected internally. Leave floating or tie to a nearby plane per PCB best practice."+      },+      {+        "number": "5",+        "name": "VDD2",+        "type": "power_in",+        "description": "Output-side positive power supply. Operating range from UVLO2 up to its maximum (25 V absolute max vs GND2). A quality bypass capacitor to GND2 placed close to the pin is required."+      },+      {+        "number": "6",+        "name": "OUT",+        "type": "output",+        "description": "Gate-driver output providing source/sink drive to the IGBT/FET gate (typ +4 A / -6 A peak). Actively pulled low during start-up and under fault conditions."+      },+      {+        "number": "7",+        "name": "CLAMP",+        "type": "bidirectional",+        "description": "Active Miller clamp pin that provides a low-impedance path for the IGBT/FET gate during OFF to prevent parasitic turn-on. An internal N-FET turns on when this pin drops below VEE2 + V_CLAMP-THR. Tie directly to the gate with minimum trace length. Max clamp current 2.5 A pk."+      },+      {+        "number": "8",+        "name": "VEE2",+        "type": "power_in",+        "description": "Output-side negative power supply. Tie to GND2 for unipolar operation, or bias to a negative rail (down to -10 V vs GND2) for negative gate-off drive. Requires bypass capacitor to GND2."+      },+      {+        "number": "9",+        "name": "GND1",+        "type": "power_in",+        "description": "Input-side (logic) ground reference. Both pin 9 and pin 16 are internally tied together and must be connected on the PCB."+      },+      {+        "number": "10",+        "name": "IN+",+        "type": "input",+        "description": "Non-inverting gate-driver input. Internally clamped to VDD1 with a 50 kOhm pull-down to ensure OUT is low with no input drive. Accepts 3.3 V / 5 V logic; minimum positive-going pulse width required at IN+ before OUT responds."+      },+      {+        "number": "11",+        "name": "IN-",+        "type": "input",+        "description": "Inverting gate-driver input. Internally clamped to VDD1 with a 50 kOhm pull-up to ensure OUT is low with no input drive. A minimum negative-going pulse width is required at IN- before OUT responds."+      },+      {+        "number": "12",+        "name": "RDY",+        "type": "output",+        "description": "Power-good (READY) indication output, active-high when VDD2 is good. Open-drain style with an internal 50 kOhm pull-up to VDD1; outputs from multiple drivers can be wired-OR. Max low-duration when triggered by UVLO2 is 200 ns; OUT stays low while RDY is low."+      },+      {+        "number": "13",+        "name": "/FLT",+        "type": "output",+        "description": "Fault output (active-low) indicating that the driver has detected a DESAT condition and disabled OUT. Open-drain compatible for wired-OR with a 10 mA max sink capability."+      },+      {+        "number": "14",+        "name": "/RST",+        "type": "input",+        "description": "Reset input, active-low, with an internal 50 kOhm pull-up to VDD1. Drive low to clear a latched DESAT fault."+      },+      {+        "number": "15",+        "name": "VDD1",+        "type": "power_in",+        "description": "Input-side (logic) power supply, 3.3 V to 5 V (6 V absolute max vs GND1). Bypass to GND1 with a quality decoupling capacitor."+      },+      {+        "number": "16",+        "name": "GND1A",+        "type": "power_in",+        "description": "Input-side ground reference (shared with pin 9 GND1 internally). Both ground pins must be connected on the PCB. Labelled GND1A on the package pin-assignment diagram."+      }+    ],+    "provenance": {+      "extractor": "ds2sf",+      "datasheet": {+        "url": "https://www.onsemi.com/pdf/datasheet/ncv57001dwr2-d.pdf",+        "pages": 22,+        "sha256": "c7c1197eac993e94",+        "source_tier": "mfr"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 16,+        "described": 16,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "metadata": {+    "specs": {+      "Manufacturer": "onsemi",+      "Package": "SOIC-16-300mil",+      "Category": "PMIC",+      "Pins": "16"+    }+  },+  "sections": [+    "hero",+    "viewers",+    "readme",+    "breadcrumbs",+    "info"+  ],+  "discovery_triggers": [+    "ncv57001dwr2g"+  ],+  "discovery_pitch": "NCV57001DWR2G (onsemi) component page with datasheet-verified CAD.",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  },   "dependencies": {},   "hero": {     "type": "image",@@ -25,10 +186,5 @@     "docs/ncv57001dwr2g-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ],-  "visibility": "public",-  "author": {-    "name": "Ray",-    "email": "[email protected]"-  }+  ] }\ No newline at end of file