← Commit history
README.md+36−8
@@ -2,7 +2,7 @@  **onsemi** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-223 -NCV4266-2CST50T3G from onsemi, in a SOT-223. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.+NCV4266-2CST50T3G from onsemi, in a SOT-223. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.  ## Pinout @@ -11,7 +11,7 @@ NCV4266-2CST50T3G from onsemi, in a SOT-223. Pinout and pin descriptions extract | 1 | I | power_in | Battery supply input voltage. Operating range VQ+0.5 V (or 4.5 V, whichever is higher) up to 45 V; tolerates +45 V peak transient and -42 V reverse. Bypass close to the pin (typ. 1.0 uF + 100 nF). | | 2 | EN | input | Enable input; a low level disables the IC. VEN(high) typ. 2.0 V (max 2.7 V), VEN(low) 0.8 V min. Withstands -42 V to +45 V. Enable input current ~4 uA at VEN = 5.0 V. | | 3 | Q | power_out | Regulated output; bypass with a capacitor to GND (typ. 3.3 uF, ESR in the stable region per Fig. 3/12). Delivers up to 150 mA at 5.0 V +-2%, with 250 mV typical dropout at 100 mA. |-| 4 | GND | power_in | Device ground / return. On SOT-223 (Case 318E) this pin is on the tab; connect to a copper pour for thermal dissipation (RthetaJA ~= 109 degC/W, RpsiJT ~= 10.9 degC/W). |+| 4 | GND | power_in | Ground; the SOT-223 tab (pin 4). |  ## Key specifications @@ -22,17 +22,45 @@ NCV4266-2CST50T3G from onsemi, in a SOT-223. Pinout and pin descriptions extract | Category | PMIC | | Pins | 4 | -## Ordering variants+## Electrical characteristics -Same part, different packaging or reel option.+Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data). -- `NCV4266-2CST50T3G`-- `NCV4266-2CST50T3GST33T3G`+| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |+|---|---|---|---|---|---|---|---|+| Input Voltage | VI | -42 |  | 45 | V |  | 2 |+| Input Peak Transient Voltage | VI |  |  | 45 | V |  | 2 |+| Enable Input Voltage | VEN | -42 |  | 45 | V |  | 2 |+| Output Voltage | VQ | -0.3 |  | 32 | V |  | 2 |+| Ground Current | Iq |  |  | 100 | mA |  | 2 |+| Input Voltage Operating Range | VI |  |  | 45 | V | Minimum VI = VQ + 0.5 V or 4.5 V (Note 1) | 2 |+| ESD Susceptibility (Human Body Model) |  | 3 |  |  | kV |  | 2 |+| Junction Temperature | TJ | -40 |  | 150 | °C |  | 2 |+| Storage Temperature | Tstg | -50 |  | 150 | °C |  | 2 |+| Lead Temperature Soldering Reflow (SMD styles only), Leaded | TSLD |  |  | 240 | °C | 60−150 s above 183, 30 s max at peak | 2 |+| Lead Temperature Soldering Reflow (SMD styles only), Free | TSLD |  |  | 265 | °C | 60−150 s above 217, 40 s max at peak | 2 |+| Lead Temperature Soldering Wave Solder (through hole styles only) | TSLD |  |  | 310 | °C | 12 sec max | 2 |+| Junction-to-Ambient Thermal Resistance (SOT-223) | RJA |  |  | 109 | °C/W | 1 oz copper, 100 mm2 copper area, FR4 (Note 3) | 3 |+| Junction-to-Tab Thermal Resistance (SOT-223) | RJT |  |  | 10.9 | °C/W |  | 3 |+| Output Voltage (5.0 V Version) | VQ | 4.9 | 5 | 5.1 | V | 100 A < IQ < 150 mA, 6.0 V < VI < 28 V | 3 |+| Output Current Limitation | IQ | 150 | 390 | 500 | mA | VQ = 90% VQTYP | 3 |+| Quiescent Current (Sleep Mode) | Iq |  | 0 | 1 | µA | VEN = 0 V, TJ = −40°C to 100°C | 3 |+| Quiescent Current | Iq |  | 40 | 60 | µA | IQ = 100 µA, TJ < 85°C | 3 |+| Quiescent Current | Iq |  | 40 | 70 | µA | IQ = 100 µA | 3 |+| Quiescent Current | Iq |  | 0.55 | 4 | mA | IQ = 50 mA | 3 |+| Dropout Voltage (5.0 V Version) | VDR |  | 230 | 500 | mV | IQ = 100 mA, VDR = VI − VQ (Note 4) | 3 |+| Load Regulation (5.0 V Version) | VQ,LO |  | 3.5 | 90 | mV | IQ = 1.0 mA to 100 mA | 3 |+| Line Regulation (5.0 V Version) | VQ |  | 1 | 30 | mV | VI = 6.0 V to 28 V, IQ = 1.0 mA | 3 |+| Enable Voltage, Output High | VEN |  | 2 | 2.7 | V | VQ ≥ VQMIN | 3 |+| Enable Voltage, Output Low (Off) | VEN | 0.8 | 1.8 |  | V | VQ ≤ 0.1 V | 3 |+| Enable Input Current | IEN |  | 4 | 8 | µA | VEN = 5.0 V | 3 |+| Thermal Shutdown Temperature | TSD | 150 |  | 200 | °C |  | 3 |+| Power Supply Ripple Rejection | PSRR |  | 68 |  | dB | fr = 100 Hz, Vr = 0.5 VPP | 3 |  ## CAD (KiCad official)  - Symbol: `NCV4266-2CST50T3G`-- Footprint: `Package_TO_SOT_SMD:SOT-223-3_TabPin2`+- Footprint: `Package_TO_SOT_SMD:SOT-223` - 3D model: SOT-223 (KiCad packages3D, STEP) - 3D model files: `ncv4266-2cst50t3g-etched.step` / `ncv4266-2cst50t3g-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ncv4266-2cst50t3g.step` / `ncv4266-2cst50t3g.glb` are the bare package body. @@ -40,7 +68,7 @@ Same part, different packaging or reel option.  Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [onsemi datasheet](https://www.onsemi.com/pdf/datasheet/ncv4266-2cst50t3-d.pdf) (13 pp, sha256 `bd97fc4713dd2309`, retrieved 2026-08-17, tier: manufacturer)+- **Datasheet:** [onsemi datasheet](https://www.onsemi.com/download/data-sheet/pdf/ncv4266-2c-d.pdf) (13 pp, sha256 `bdc87d8fc41507c8`, retrieved 2026-11-17, tier: manufacturer) - **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - **CAD:** KiCad official libraries (CC-BY-SA 4.0). 
docs/ncv4266-2cst50t3g-datasheet.pdf
⋯ 1 unchanged line ⋯
ncv4266-2cst50t3g-hero.glbadded
⋯ 1 unchanged line ⋯
ncv4266-2cst50t3g-hero.overlay.jsonadded+177
@@ -0,0 +1,177 @@+{+ "spec": "adom-hero 1.4",+ "mpn": "NCV4266-2CST50T3G",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+  "pad_outlines": {+   "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+   "rgba": [+    0.0,+    0.902,+    0.863,+    0.5+   ],+   "pads": 4,+   "span_mm": 8.4,+   "dash_mm": 0.21,+   "gap_mm": 0.126,+   "pad_stroke_mm": 0.0504+  },+  "silkscreen": {+   "material": "Silkscreen reference lines - 30 percent opacity",+   "rgba": [+    0.92,+    0.96,+    1.0,+    0.3+   ],+   "footprint_items": 5,+   "pin1": {+    "source": "footprint silkscreen",+    "pad": "1"+   }+  },+  "signal_names": {+   "material": "Signal names - 50 percent opacity",+   "rgba": [+    0.92,+    0.96,+    1.0,+    0.5+   ],+   "font": "DejaVu Sans Mono",+   "labels": 4,+   "sides": "top + mirrored underside (single-sided)",+   "omitted": null,+   "fallback_to_pad_number": 0+  }+ },+ "align": {+  "ok": true,+  "board_underside": false,+  "electrical_pads_without_contact": [],+  "mounting_pads_left_out": [],+  "centre_offset_mm": 0.0,+  "over_pads": true,+  "tolerance_mm": 0.664,+  "orientation_flipped": false,+  "contacts_bbox_mm": [+   -3.5,+   3.5,+   -2.684,+   2.684+  ],+  "pads_bbox_mm": [+   -4.15,+   4.15,+   -3.05,+   3.05+  ],+  "seating_z_mm": 0.0+ },+ "sources": {+  "glb": "ncv4266-2cst50t3g-etched.glb",+  "glb_sha256": "25d67356e1dbf833a72f4a4e22617b060a4889e22fc716a6dfff4ada461c02de",+  "footprint": "ncv4266-2cst50t3g.kicad_mod",+  "footprint_sha256": "3e4cc90faee60c2b715bffae94c18bb43ed59673056acda51bb157b935645ce2",+  "pins": "page.json component.pins",+  "pins_sha256": "39e572cb34fe14988565451ea135111c3b2e501dfad57b1cd83f3e47773d36ff"+ },+ "generator": "factory/hero_glb.py",+ "labels": [+  {+   "pad": "1",+   "text": "I",+   "x": -4.3,+   "y": -2.3,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "2",+   "text": "EN",+   "x": -4.3,+   "y": 0.0,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "3",+   "text": "Q",+   "x": -4.3,+   "y": 2.3,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "4",+   "text": "GND",+   "x": 4.3,+   "y": 0.0,+   "align": "left",+   "vertical": false,+   "h": 0.6+  }+ ],+ "pads": [+  {+   "number": "1",+   "shape": "roundrect",+   "center_mm": [+    -3.15,+    -2.3+   ],+   "size_mm": [+    2.0,+    1.5+   ],+   "rot": 0.0+  },+  {+   "number": "2",+   "shape": "roundrect",+   "center_mm": [+    -3.15,+    0.0+   ],+   "size_mm": [+    2.0,+    1.5+   ],+   "rot": 0.0+  },+  {+   "number": "3",+   "shape": "roundrect",+   "center_mm": [+    -3.15,+    2.3+   ],+   "size_mm": [+    2.0,+    1.5+   ],+   "rot": 0.0+  },+  {+   "number": "4",+   "shape": "roundrect",+   "center_mm": [+    3.15,+    0.0+   ],+   "size_mm": [+    2.0,+    3.8+   ],+   "rot": 0.0+  }+ ]+}\ No newline at end of file
ncv4266-2cst50t3g.kicad_mod+37−71
@@ -1,4 +1,4 @@-(footprint "SOT-223-3_TabPin2"+(footprint "SOT-223" 	(version 20260206) 	(generator "pcbnew") 	(generator_version "10.0")@@ -8,7 +8,7 @@ 	(property "Reference" "REF**" 		(at 0 -4.5 0) 		(layer "F.SilkS")-		(uuid "095b50a5-76ce-476b-aa10-37a37fa441f1")+		(uuid "4497a1e1-94b1-4cba-abfc-02d82a04371f") 		(effects 			(font 				(size 1 1)@@ -16,10 +16,10 @@ 			) 		) 	)-	(property "Value" "SOT-223-3_TabPin2"+	(property "Value" "SOT-223" 		(at 0 4.5 0) 		(layer "F.Fab")-		(uuid "a763838d-1dc3-4eda-bbc0-fbcf1edf1449")+		(uuid "222a057b-4f1f-481e-81c0-82276f6e2fbf") 		(effects 			(font 				(size 1 1)@@ -32,7 +32,7 @@ 		(unlocked yes) 		(layer "F.Fab") 		(hide yes)-		(uuid "0fecb949-4744-4c65-8091-70f595847ba4")+		(uuid "cf35375b-a35a-4ccf-b401-52356d4eb3ab") 		(effects 			(font 				(size 1.27 1.27)@@ -45,7 +45,7 @@ 		(unlocked yes) 		(layer "F.Fab") 		(hide yes)-		(uuid "7dd6192e-e612-428f-816e-6f28697542d5")+		(uuid "e0b857b7-85f4-442e-9375-43b7f0b65024") 		(effects 			(font 				(size 1.27 1.27)@@ -63,7 +63,7 @@ 			(type solid) 		) 		(layer "F.SilkS")-		(uuid "e98ec803-a6f4-4196-9fa0-d9f7619efa9d")+		(uuid "10341b74-de1d-44f8-b919-9dc7b01c77a6") 	) 	(fp_line 		(start -1.85 3.41)@@ -73,7 +73,7 @@ 			(type solid) 		) 		(layer "F.SilkS")-		(uuid "6e43f798-7915-403c-b947-4851bde35045")+		(uuid "9eaaee9c-d787-4c4e-9409-486f5d803253") 	) 	(fp_line 		(start 1.91 -3.41)@@ -83,7 +83,7 @@ 			(type solid) 		) 		(layer "F.SilkS")-		(uuid "ddfc40c4-e33c-493e-b735-24282440d539")+		(uuid "668bbda1-c7e1-4e23-9d62-dd4d052018b0") 	) 	(fp_line 		(start 1.91 3.41)@@ -93,7 +93,7 @@ 			(type solid) 		) 		(layer "F.SilkS")-		(uuid "79366377-6a9f-460a-b0d1-788467590954")+		(uuid "7b7161b8-bc72-4822-9d67-8c4bc120433f") 	) 	(fp_poly 		(pts@@ -105,67 +105,27 @@ 		) 		(fill yes) 		(layer "F.SilkS")-		(uuid "27420593-f422-495a-9e17-88a99bcd8a3d")+		(uuid "818bd365-7a79-40a2-b037-dacc75b8af05") 	) 	(fp_line-		(start -4.4 -3.6)-		(end -4.4 3.6)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-		(uuid "2d708b29-208a-4760-a2c5-6626e4d03d29")-	)-	(fp_line-		(start -4.4 3.6)-		(end 4.4 3.6)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-		(uuid "ffe8efb3-9432-4dfe-8e3a-faf2eb064270")-	)-	(fp_line-		(start 4.4 -3.6)-		(end -4.4 -3.6)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-		(uuid "d963e7fb-b321-4298-bcd6-9650f5938938")-	)-	(fp_line-		(start 4.4 3.6)-		(end 4.4 -3.6)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-		(uuid "18839f08-10e9-4a73-9312-8be172f09091")-	)-	(fp_line-		(start -1.85 -2.35)+		(start -1.85 -2.3) 		(end -1.85 3.35) 		(stroke 			(width 0.1) 			(type solid) 		) 		(layer "F.Fab")-		(uuid "659fc817-2286-4dd8-ba60-8e62262ce6cc")+		(uuid "2a9ca989-6b38-468d-a714-75a033988b2c") 	) 	(fp_line-		(start -1.85 -2.35)-		(end -0.85 -3.35)+		(start -1.85 -2.3)+		(end -0.8 -3.35) 		(stroke 			(width 0.1) 			(type solid) 		) 		(layer "F.Fab")-		(uuid "f393364a-2641-4746-ba4c-6509ea1de503")+		(uuid "bcb7341f-c5b7-4cf0-ac84-66c574c5e61c") 	) 	(fp_line 		(start -1.85 3.35)@@ -175,17 +135,17 @@ 			(type solid) 		) 		(layer "F.Fab")-		(uuid "27db54e0-f4a8-4972-bcbc-256787416dcd")+		(uuid "c011dc66-40ad-4f1e-a34f-e251dae0cd31") 	) 	(fp_line-		(start -0.85 -3.35)+		(start -0.8 -3.35) 		(end 1.85 -3.35) 		(stroke 			(width 0.1) 			(type solid) 		) 		(layer "F.Fab")-		(uuid "be579ebe-38db-4860-98f0-9f530f704760")+		(uuid "80711826-0dce-449b-af78-388864936159") 	) 	(fp_line 		(start 1.85 -3.35)@@ -195,12 +155,12 @@ 			(type solid) 		) 		(layer "F.Fab")-		(uuid "9d748ff0-f43a-42f3-a9ff-3a463972b1ca")+		(uuid "a66ee799-671f-4902-ac92-f94d39f82acf") 	) 	(fp_text user "${REFERENCE}" 		(at 0 0 90) 		(layer "F.Fab")-		(uuid "aff1cd04-29c5-47f0-8349-1badf43ec67b")+		(uuid "184c46b5-a004-48e0-8f63-d7d63dc324be") 		(effects 			(font 				(size 0.8 0.8)@@ -213,28 +173,28 @@ 		(size 2 1.5) 		(layers "F.Cu" "F.Mask" "F.Paste") 		(roundrect_rratio 0.25)-		(uuid "6c38c733-73aa-46ef-9aa8-0adc47a79448")+		(uuid "ea891fee-0855-44cc-8da9-0c7b9e3b1505") 	) 	(pad "2" smd roundrect 		(at -3.15 0) 		(size 2 1.5) 		(layers "F.Cu" "F.Mask" "F.Paste") 		(roundrect_rratio 0.25)-		(uuid "553b4aa3-b4fc-45ee-9bbe-5eb8183ee7d8")-	)-	(pad "2" smd roundrect-		(at 3.15 0)-		(size 2 3.8)-		(layers "F.Cu" "F.Mask" "F.Paste")-		(roundrect_rratio 0.25)-		(uuid "118e82e2-9099-4e46-a269-1e2cb8448d5e")+		(uuid "2adbaf0f-7617-4618-9438-78a8bd4ec4b2") 	) 	(pad "3" smd roundrect 		(at -3.15 2.3) 		(size 2 1.5) 		(layers "F.Cu" "F.Mask" "F.Paste") 		(roundrect_rratio 0.25)-		(uuid "5046df04-2b74-45a5-867e-e33a5e51e59c")+		(uuid "1b42a1a5-e735-42f2-b87a-1df5a461081d")+	)+	(pad "4" smd roundrect+		(at 3.15 0)+		(size 2 3.8)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+		(uuid "023f2cc5-97fb-4421-8e37-e8aa385789b4") 	) 	(embedded_fonts no) 	(model "${KICAD10_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-223.step"@@ -248,4 +208,10 @@ 			(xyz 0 0 0) 		) 	)+	(fp_poly+		(pts (xy -4.40 -3.30) (xy -2.10 -3.30) (xy -2.10 -3.60) (xy 2.10 -3.60) (xy 2.10 -2.15) (xy 4.40 -2.15) (xy 4.40 2.15) (xy 2.10 2.15) (xy 2.10 3.60) (xy -2.10 3.60) (xy -2.10 3.30) (xy -4.40 3.30))+		(stroke (width 0.05) (type solid))+		(fill no)+		(layer "F.CrtYd")+	) )
ncv4266-2cst50t3g.lbr+25−24
@@ -50,14 +50,14 @@ <layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/> </layers> <library>-<description>SOT-223-3_TabPin2 (symbol synthesized from footprint pads)</description>+<description></description> <packages>-<package name="SOT-223-3_TabPin2">+<package name="SOT-223">   <description>4 pads, 8.3 x 6.1 mm. module CMS SOT223 4 pins</description>   <smd name="1" x="-3.1500" y="2.3000" dx="2.0000" dy="1.5000" layer="1" roundness="50"/>   <smd name="2" x="-3.1500" y="-0.0000" dx="2.0000" dy="1.5000" layer="1" roundness="50"/>-  <smd name="2@2" x="3.1500" y="-0.0000" dx="2.0000" dy="3.8000" layer="1" roundness="50"/>   <smd name="3" x="-3.1500" y="-2.3000" dx="2.0000" dy="1.5000" layer="1" roundness="50"/>+  <smd name="4" x="3.1500" y="-0.0000" dx="2.0000" dy="3.8000" layer="1" roundness="50"/>   <polygon width="0.1200" layer="21">     <vertex x="-3.1300" y="3.3100"/>     <vertex x="-3.3700" y="3.6400"/>@@ -68,41 +68,42 @@   <wire x1="-1.8500" y1="-3.4100" x2="1.9100" y2="-3.4100" width="0.1200" layer="21"/>   <wire x1="1.9100" y1="3.4100" x2="1.9100" y2="2.1500" width="0.1200" layer="21"/>   <wire x1="1.9100" y1="-3.4100" x2="1.9100" y2="-2.1500" width="0.1200" layer="21"/>-  <wire x1="-1.8500" y1="2.3500" x2="-1.8500" y2="-3.3500" width="0.1000" layer="51"/>-  <wire x1="-1.8500" y1="2.3500" x2="-0.8500" y2="3.3500" width="0.1000" layer="51"/>+  <wire x1="-1.8500" y1="2.3000" x2="-1.8500" y2="-3.3500" width="0.1000" layer="51"/>+  <wire x1="-1.8500" y1="2.3000" x2="-0.8000" y2="3.3500" width="0.1000" layer="51"/>   <wire x1="-1.8500" y1="-3.3500" x2="1.8500" y2="-3.3500" width="0.1000" layer="51"/>-  <wire x1="-0.8500" y1="3.3500" x2="1.8500" y2="3.3500" width="0.1000" layer="51"/>+  <wire x1="-0.8000" y1="3.3500" x2="1.8500" y2="3.3500" width="0.1000" layer="51"/>   <wire x1="1.8500" y1="3.3500" x2="1.8500" y2="-3.3500" width="0.1000" layer="51"/>   <text x="0" y="4.010" size="1.27" layer="25" align="bottom-center">&gt;NAME</text>   <text x="0" y="-4.010" size="1.27" layer="27" align="top-center">&gt;VALUE</text> </package> </packages> <symbols>-<symbol name="SOT-223-3_TabPin2">-  <description>SOT-223-3_TabPin2 (symbol synthesized from footprint pads)</description>-  <wire x1="-7.62" y1="3.81" x2="7.62" y2="3.81" width="0.254" layer="94"/>-  <wire x1="7.62" y1="3.81" x2="7.62" y2="-3.81" width="0.254" layer="94"/>-  <wire x1="7.62" y1="-3.81" x2="-7.62" y2="-3.81" width="0.254" layer="94"/>-  <wire x1="-7.62" y1="-3.81" x2="-7.62" y2="3.81" width="0.254" layer="94"/>-  <text x="0" y="6.35" size="1.27" layer="95" align="bottom-center">&gt;NAME</text>-  <text x="0" y="-6.35" size="1.27" layer="96" align="top-center">&gt;VALUE</text>-  <pin name="1" x="-12.7" y="2.54" length="short" direction="pas"/>-  <pin name="2" x="-12.7" y="0" length="short" direction="pas"/>-  <pin name="3" x="12.7" y="2.54" length="short" direction="pas" rot="R180"/>+<symbol name="NCV4266-2CST50T3G">+  <wire x1="-12.7" y1="2.54" x2="12.7" y2="2.54" width="0.254" layer="94"/>+  <wire x1="12.7" y1="2.54" x2="12.7" y2="-5.08" width="0.254" layer="94"/>+  <wire x1="12.7" y1="-5.08" x2="-12.7" y2="-5.08" width="0.254" layer="94"/>+  <wire x1="-12.7" y1="-5.08" x2="-12.7" y2="2.54" width="0.254" layer="94"/>+  <text x="0.0000" y="5.0800" size="1.27" layer="95" align="center">&gt;NAME</text>+  <text x="0.0000" y="-7.6200" size="1.27" layer="96" align="center">&gt;VALUE</text>+  <pin name="I" x="-17.78" y="0" length="middle" direction="pwr"/>+  <pin name="EN" x="-17.78" y="-2.54" length="middle" direction="in"/>+  <pin name="GND" x="17.78" y="0" length="middle" direction="pwr" rot="R180"/>+  <pin name="Q" x="17.78" y="-2.54" length="middle" direction="out" rot="R180"/> </symbol> </symbols> <devicesets>-<deviceset name="SOT-223-3_TabPin2" prefix="U">-  <description>SOT-223-3_TabPin2 (symbol synthesized from footprint pads)</description>+<deviceset name="NCV4266-2CST50T3G" prefix="U">+  <description></description>   <gates>-    <gate name="G$1" symbol="SOT-223-3_TabPin2" x="0" y="0"/>+    <gate name="G$1" symbol="NCV4266-2CST50T3G" x="0" y="0"/>   </gates>   <devices>-    <device name="" package="SOT-223-3_TabPin2">+    <device name="" package="SOT-223">       <connects>-        <connect gate="G$1" pin="1" pad="1"/>-        <connect gate="G$1" pin="2" pad="2 2@2"/>-        <connect gate="G$1" pin="3" pad="3"/>+        <connect gate="G$1" pin="I" pad="1"/>+        <connect gate="G$1" pin="EN" pad="2"/>+        <connect gate="G$1" pin="GND" pad="4"/>+        <connect gate="G$1" pin="Q" pad="3"/>       </connects>       <technologies><technology name=""/></technologies>     </device>
package.json+133−6
@@ -1,12 +1,14 @@ {   "slug": "ncv4266-2cst50t3g",-  "version": "0.1.0",+  "version": "0.2.0",   "type": "component",-  "description": "onsemi Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-223. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "description": "onsemi Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-223. Pinout settled in review by an AI reviewer against the manufacturer's datasheet, KiCad symbol/footprint/3D.",   "tags": [     "component",     "pmic",-    "ncv4266-2cst50t3g"+    "ncv4266-2cst50t3g",+    "factory-2.0.0",+    "extractor-text"   ],   "dependencies": {},   "hero": {@@ -24,6 +26,131 @@     "docs/hero.png",     "docs/ncv4266-2cst50t3g-datasheet.pdf",     "viewers/symbol.html",-    "viewers/footprint.html"-  ]-}\ No newline at end of file+    "viewers/footprint.html",+    "ncv4266-2cst50t3g-hero.glb",+    "ncv4266-2cst50t3g-hero.overlay.json"+  ],+  "component": {+    "mpn": "NCV4266-2CST50T3G",+    "land_source": "kicad",+    "land_note": "TabPin scan: onsemi's SOT-223 pinout is 1 I, 2 EN, 3 Q, 4 GND (the tab). SOT-223-3_TabPin2 joins the tab to pad 2, which would tie EN to the grounded tab. Land changed to KiCad SOT-223, whose tab is a separate pad 4.",+    "manufacturer": "onsemi",+    "package": "SOT-223",+    "pin_count": 4,+    "category": "PMIC",+    "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",+    "datasheet": "https://www.onsemi.com/download/data-sheet/pdf/ncv4266-2c-d.pdf",+    "parts": {+      "symbol": "ncv4266-2cst50t3g.kicad_sym",+      "footprint": "ncv4266-2cst50t3g.kicad_mod",+      "model_3d": "ncv4266-2cst50t3g-hero.glb",+      "model_3d_plain": "ncv4266-2cst50t3g.glb",+      "model_3d_step": "ncv4266-2cst50t3g-etched.step",+      "model_3d_step_plain": "ncv4266-2cst50t3g.step",+      "lbr": "ncv4266-2cst50t3g.lbr"+    },+    "distributor_links": {+      "lcsc": "C511968",+      "digikey": "488-NCV4266-2CST50T3GTR-ND",+      "mouser": "863-NCV4266-2CST50T3"+    },+    "distributor_check": {+      "checked_at": "2026-11-17T06:52:12Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "488-NCV4266-2CST50T3GTR-ND",+        "status": "found"+      },+      "mouser": {+        "pn": "863-NCV4266-2CST50T3",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "I",+        "type": "power_in",+        "description": "Battery supply input voltage. Operating range VQ+0.5 V (or 4.5 V, whichever is higher) up to 45 V; tolerates +45 V peak transient and -42 V reverse. Bypass close to the pin (typ. 1.0 uF + 100 nF)."+      },+      {+        "number": "2",+        "name": "EN",+        "type": "input",+        "description": "Enable input; a low level disables the IC. VEN(high) typ. 2.0 V (max 2.7 V), VEN(low) 0.8 V min. Withstands -42 V to +45 V. Enable input current ~4 uA at VEN = 5.0 V."+      },+      {+        "number": "3",+        "name": "Q",+        "type": "power_out",+        "description": "Regulated output; bypass with a capacitor to GND (typ. 3.3 uF, ESR in the stable region per Fig. 3/12). Delivers up to 150 mA at 5.0 V +-2%, with 250 mV typical dropout at 100 mA."+      },+      {+        "number": "4",+        "name": "GND",+        "type": "power_in",+        "description": "Ground; the SOT-223 tab (pin 4)."+      }+    ],+    "provenance": {+      "extractor": "ds2sf",+      "datasheet": {+        "url": "https://www.onsemi.com/download/data-sheet/pdf/ncv4266-2c-d.pdf",+        "pages": 13,+        "sha256": "bdc87d8fc41507c8",+        "source_tier": "mfr"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 4,+        "described": 4,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    },+    "models_3d": [+      {+        "file": "ncv4266-2cst50t3g.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          7.0,+          6.5,+          1.7+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "77ad6dbacc493cb619c728f26d2ddcf461eb0feb6b977b47d01d51e67016f654",+        "checked": "2026-11-17",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "ncv4266-2cst50t3g-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          7.0,+          6.5,+          1.7+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "369633537e677636a562c3d3f45487406d5804394319e4a1511e9b06af088ae8",+        "checked": "2026-11-17",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]+  }+}
page.json+45−23
@@ -4,31 +4,51 @@   "slug": "ncv4266-2cst50t3g",   "title": "NCV4266-2CST50T3G",   "brief": "onsemi Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-223. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",-  "version": "0.1.0",+  "version": "0.2.0",   "license": "CC-BY-SA-4.0",   "tags": [     "component",     "pmic",-    "ncv4266-2cst50t3g"+    "ncv4266-2cst50t3g",+    "factory-2.0.0",+    "extractor-text"   ],   "component": {     "mpn": "NCV4266-2CST50T3G",+    "land_source": "kicad",+    "land_note": "TabPin scan: onsemi's SOT-223 pinout is 1 I, 2 EN, 3 Q, 4 GND (the tab). SOT-223-3_TabPin2 joins the tab to pad 2, which would tie EN to the grounded tab. Land changed to KiCad SOT-223, whose tab is a separate pad 4.",     "manufacturer": "onsemi",     "package": "SOT-223",     "pin_count": 4,     "category": "PMIC",     "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",-    "datasheet": "https://www.onsemi.com/pdf/datasheet/ncv4266-2cst50t3-d.pdf",+    "datasheet": "https://www.onsemi.com/download/data-sheet/pdf/ncv4266-2c-d.pdf",     "parts": {       "symbol": "ncv4266-2cst50t3g.kicad_sym",       "footprint": "ncv4266-2cst50t3g.kicad_mod",-      "model_3d": "ncv4266-2cst50t3g-etched.glb",+      "model_3d": "ncv4266-2cst50t3g-hero.glb",       "model_3d_plain": "ncv4266-2cst50t3g.glb",       "model_3d_step": "ncv4266-2cst50t3g-etched.step",       "model_3d_step_plain": "ncv4266-2cst50t3g.step",       "lbr": "ncv4266-2cst50t3g.lbr"     },-    "distributor_links": {},+    "distributor_links": {+      "lcsc": "C511968",+      "digikey": "488-NCV4266-2CST50T3GTR-ND",+      "mouser": "863-NCV4266-2CST50T3"+    },+    "distributor_check": {+      "checked_at": "2026-11-17T06:52:12Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "488-NCV4266-2CST50T3GTR-ND",+        "status": "found"+      },+      "mouser": {+        "pn": "863-NCV4266-2CST50T3",+        "status": "found"+      }+    },     "pins": [       {         "number": "1",@@ -52,15 +72,15 @@         "number": "4",         "name": "GND",         "type": "power_in",-        "description": "Device ground / return. On SOT-223 (Case 318E) this pin is on the tab; connect to a copper pour for thermal dissipation (RthetaJA ~= 109 degC/W, RpsiJT ~= 10.9 degC/W)."+        "description": "Ground; the SOT-223 tab (pin 4)."       }     ],     "provenance": {       "extractor": "ds2sf",       "datasheet": {-        "url": "https://www.onsemi.com/pdf/datasheet/ncv4266-2cst50t3-d.pdf",+        "url": "https://www.onsemi.com/download/data-sheet/pdf/ncv4266-2c-d.pdf",         "pages": 13,-        "sha256": "bd97fc4713dd2309",+        "sha256": "bdc87d8fc41507c8",         "source_tier": "mfr"       },       "cad": "KiCad official (CC-BY-SA 4.0)",@@ -84,15 +104,15 @@         "origin": "footprint origin = pad-pattern centre",         "seat": "z = 0",         "extents_mm": [-          7.0,+          7,           6.5,           1.7         ],-        "zmin_mm": -0.0,-        "centre_offset_mm": 0.0,+        "zmin_mm": 0,+        "centre_offset_mm": 0,         "footprint_binding": "identity",         "sha256": "77ad6dbacc493cb619c728f26d2ddcf461eb0feb6b977b47d01d51e67016f654",-        "checked": "2026-10-07",+        "checked": "2026-11-17",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -103,15 +123,15 @@         "origin": "footprint origin = pad-pattern centre",         "seat": "z = 0",         "extents_mm": [-          7.0,+          7,           6.5,           1.7         ],-        "zmin_mm": -0.0,-        "centre_offset_mm": 0.0,+        "zmin_mm": 0,+        "centre_offset_mm": 0,         "footprint_binding": "identity",-        "sha256": "a55b555dc79f82e34ca85b840f51ec54e85371bd24c2d4c86f06db1a51e644ab",-        "checked": "2026-10-16",+        "sha256": "369633537e677636a562c3d3f45487406d5804394319e4a1511e9b06af088ae8",+        "checked": "2026-11-17",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ]@@ -165,10 +185,12 @@     "docs/hero.png",     "docs/ncv4266-2cst50t3g-datasheet.pdf",     "viewers/symbol.html",-    "viewers/footprint.html"+    "viewers/footprint.html",+    "ncv4266-2cst50t3g-hero.glb",+    "ncv4266-2cst50t3g-hero.overlay.json"   ],-  "visibility": {-    "public": true-  },-  "updated_at": "2026-09-25T03:05:41.896Z"-}+  "visibility": "public",+  "updated_at": "2026-09-25T03:05:41.896Z",+  "description": "onsemi Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-223. Pinout settled in review by an AI reviewer against the manufacturer's datasheet, KiCad symbol/footprint/3D.",+  "org": "adom"+}\ No newline at end of file
viewers/footprint.html+1−65
@@ -1,65 +1 @@-<!doctype html><html lang=en><head><meta charset=utf-8>-<meta name=viewport content="width=device-width,initial-scale=1"><title>RAY/NCV4266-2CST50T3G footprint</title>-<style>-:root{--bg:#0d1117;--panel:#161b22;--edge:#30363d;--ink:#e6edf3;--mut:#8b949e;--acc:#00b8b0;--accb:#00e6dc;--hi:#6ea8fe}-*{box-sizing:border-box;margin:0}html,body{height:100%}-body{background:var(--bg);color:var(--ink);font-family:'Satoshi',system-ui,sans-serif;display:flex;flex-direction:column}-.bar{display:flex;flex-wrap:wrap;align-items:center;gap:8px;padding:8px 11px;border-bottom:1px solid var(--edge);flex:none}-.bar .h{font-size:11px;text-transform:uppercase;letter-spacing:.06em;color:var(--mut);font-weight:700}-.bar .sp{flex:1}-.lyrtog{display:inline-flex;align-items:center;gap:6px;font-size:11px;color:var(--mut);background:#1a2130;border:1px solid var(--edge);border-radius:999px;padding:3px 9px;cursor:pointer;user-select:none}-.lyrtog.on{color:var(--ink);border-color:#485162}.lyrtog:not(.on){opacity:.5}-.lyrtog .d{width:8px;height:8px;border-radius:50%;background:#485162}-.stage{flex:1;min-height:0;position:relative;overflow:hidden;background:var(--bg);cursor:grab;touch-action:none}-.stage.drag{cursor:grabbing}-.stage svg{position:absolute;inset:0;width:100%;height:100%}-.pingroup,.pad{cursor:pointer}-.pingroup.hi .pinvis{stroke:var(--hi)!important;stroke-width:7}-rect.pad.hi{stroke:var(--hi);stroke-width:.15;paint-order:stroke}-.lyr-off{display:none}-#tip{position:fixed;z-index:99;pointer-events:none;display:none;max-width:250px;background:#0d1117;border:1px solid var(--acc);border-radius:8px;padding:7px 10px;box-shadow:0 8px 26px #000a}-#tip .tn{font:700 12px ui-monospace,monospace;color:var(--accb)}-#tip .tt{font-size:10px;text-transform:uppercase;letter-spacing:.04em;color:var(--mut);margin-top:1px}-#tip .td{font-size:11px;color:var(--ink);margin-top:5px;line-height:1.4}-</style></head><body>-<div class=bar><span class=h>PCB footprint</span><span class=sp></span><button class="lyrtog on" data-lyr="copper"><span class="d" style="background:#e35d5d"></span>Copper</button><button class="lyrtog on" data-lyr="silk"><span class="d" style="background:#e6edf3"></span>Silkscreen</button><button class="lyrtog" data-lyr="fab"><span class="d" style="background:#8b949e"></span>Fab</button><button class="lyrtog" data-lyr="courtyard"><span class="d" style="background:#bc8cff"></span>Courtyard</button></div>-<div class=stage id=stage><svg xmlns='http://www.w3.org/2000/svg' viewBox='-4.800 -4.040 9.600 8.040' style='width:100%;height:100%'><line class='ly-silk' x1='-1.850' y1='-3.410' x2='1.910' y2='-3.410' stroke='#d8b4fe' stroke-width='0.120'/><line class='ly-silk' x1='-1.850' y1='3.410' x2='1.910' y2='3.410' stroke='#d8b4fe' stroke-width='0.120'/><line class='ly-silk' x1='1.910' y1='-3.410' x2='1.910' y2='-2.150' stroke='#d8b4fe' stroke-width='0.120'/><line class='ly-silk' x1='1.910' y1='3.410' x2='1.910' y2='2.150' stroke='#d8b4fe' stroke-width='0.120'/><line class='ly-courtyard' x1='-4.400' y1='-3.600' x2='-4.400' y2='3.600' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='-4.400' y1='3.600' x2='4.400' y2='3.600' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='4.400' y1='-3.600' x2='-4.400' y2='-3.600' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='4.400' y1='3.600' x2='4.400' y2='-3.600' stroke='#4ade80' stroke-width='0.050'/><line class='ly-fab' x1='-1.850' y1='-2.350' x2='-1.850' y2='3.350' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='-1.850' y1='-2.350' x2='-0.850' y2='-3.350' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='-1.850' y1='3.350' x2='1.850' y2='3.350' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='-0.850' y1='-3.350' x2='1.850' y2='-3.350' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='1.850' y1='-3.350' x2='1.850' y2='3.350' stroke='#f472b6' stroke-width='0.100'/><polygon class='ly-silk' points='-3.130,-3.310 -3.370,-3.640 -2.890,-3.640 -3.130,-3.310' fill='#d8b4fe' stroke='none'/><rect class='ly-copper pad' data-num='1' data-name='I' x='-4.150' y='-3.050' width='2.000' height='1.500' rx='0.375' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-3.150' y='-2.300' font-size='0.900' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>1</text><rect class='ly-copper pad' data-num='2' data-name='EN' x='-4.150' y='-0.750' width='2.000' height='1.500' rx='0.375' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-3.150' y='0.000' font-size='0.900' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>2</text><rect class='ly-copper pad' data-num='2' data-name='EN' x='2.150' y='-1.900' width='2.000' height='3.800' rx='0.500' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='3.150' y='0.000' font-size='1.100' transform='rotate(-90 3.150 0.000)' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>2</text><rect class='ly-copper pad' data-num='3' data-name='Q' x='-4.150' y='1.550' width='2.000' height='1.500' rx='0.375' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-3.150' y='2.300' font-size='0.900' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>3</text></svg></div>-<div id=tip></div>-<script>-var KIND="footprint", MPN="RAY/NCV4266-2CST50T3G", PINS=[{"desc":"","name":"I","number":"1","type":""},{"desc":"","name":"EN","number":"2","type":""},{"desc":"","name":"GND","number":"4","type":""},{"desc":"","name":"Q","number":"3","type":""}];-var byNum={}; PINS.forEach(function(p){byNum[String(p.number)]=p;});-var stage=document.getElementById('stage'), svg=stage.querySelector('svg'), tip=document.getElementById('tip');-// ---- pan/zoom -----var vb=(svg.getAttribute('viewBox')||'0 0 100 100').split(/\s+/).map(Number), base=vb.slice();-function setVB(){svg.setAttribute('viewBox',vb.join(' '));}-stage.addEventListener('wheel',function(e){e.preventDefault();var r=stage.getBoundingClientRect();var mx=(e.clientX-r.left)/r.width,my=(e.clientY-r.top)/r.height;var f=e.deltaY<0?0.88:1.14;var nw=vb[2]*f,nh=vb[3]*f;vb[0]+=(vb[2]-nw)*mx;vb[1]+=(vb[3]-nh)*my;vb[2]=nw;vb[3]=nh;setVB();},{passive:false});-var pan=null;-stage.addEventListener('pointerdown',function(e){pan={x:e.clientX,y:e.clientY};stage.classList.add('drag');stage.setPointerCapture(e.pointerId);});-stage.addEventListener('pointermove',function(e){if(!pan)return;var r=stage.getBoundingClientRect();vb[0]-=(e.clientX-pan.x)/r.width*vb[2];vb[1]-=(e.clientY-pan.y)/r.height*vb[3];pan={x:e.clientX,y:e.clientY};setVB();});-function endPan(){pan=null;stage.classList.remove('drag');}-stage.addEventListener('pointerup',endPan);stage.addEventListener('pointerleave',endPan);-stage.addEventListener('dblclick',function(){vb=base.slice();setVB();});-// ---- cross-highlight bus -----function els(n){return [].slice.call(document.querySelectorAll('[data-num="'+n+'"]'));}-function clearHi(){[].slice.call(document.querySelectorAll('.hi')).forEach(function(e){e.classList.remove('hi');});}-function hi(n){els(n).forEach(function(e){e.classList.add('hi');});}-function post(n){try{parent.postMessage({type:'lbr-hover',pin:n===null?null:String(n),mpn:MPN},'*');}catch(_){}}-function showTip(n,x,y){var p=byNum[String(n)];if(!p)return;tip.innerHTML='<span class=tn></span><div class=tt></div><div class=td></div>';tip.querySelector('.tn').textContent=n+'  '+(p.name||'');tip.querySelector('.tt').textContent=p.type||'';var d=p.desc||'';if(d)tip.querySelector('.td').textContent=d;else tip.querySelector('.td').style.display='none';tip.style.display='block';tip.style.left=(x+14)+'px';tip.style.top=(y+12)+'px';}-[].slice.call(document.querySelectorAll('.pingroup,.pad')).forEach(function(g){-  var n=g.getAttribute('data-num');-  g.addEventListener('mouseenter',function(e){clearHi();hi(n);post(n);showTip(n,e.clientX,e.clientY);});-  g.addEventListener('mousemove',function(e){tip.style.left=(e.clientX+14)+'px';tip.style.top=(e.clientY+12)+'px';});-  g.addEventListener('mouseleave',function(){clearHi();post(null);tip.style.display='none';});-});-window.addEventListener('message',function(e){var d=e.data||{};if(d.type!=='lbr-hover')return;clearHi();if(d.pin!=null)hi(d.pin);});-// ---- footprint layer toggles -----[].slice.call(document.querySelectorAll('.lyrtog')).forEach(function(b){-  function apply(on){[].slice.call(document.querySelectorAll('.ly-'+b.getAttribute('data-lyr'))).forEach(function(el){el.classList.toggle('lyr-off',!on);});}-  apply(b.classList.contains('on'));-  b.addEventListener('click',function(){apply(b.classList.toggle('on'));});-});-// ---- auto-grow the host readme iframe -----function ph(){var h=Math.max(360,Math.min(16000,document.body.scrollHeight||420));parent.postMessage({type:'readme-height',height:h},'*');}-window.addEventListener('load',ph);setTimeout(ph,300);-</script>-</body></html>+<!doctype html><title>ncv4266-2cst50t3g</title>\ No newline at end of file
viewers/symbol.html+1−65
@@ -1,65 +1 @@-<!doctype html><html lang=en><head><meta charset=utf-8>-<meta name=viewport content="width=device-width,initial-scale=1"><title>RAY/NCV4266-2CST50T3G symbol</title>-<style>-:root{--bg:#0d1117;--panel:#161b22;--edge:#30363d;--ink:#e6edf3;--mut:#8b949e;--acc:#00b8b0;--accb:#00e6dc;--hi:#6ea8fe}-*{box-sizing:border-box;margin:0}html,body{height:100%}-body{background:var(--bg);color:var(--ink);font-family:'Satoshi',system-ui,sans-serif;display:flex;flex-direction:column}-.bar{display:flex;flex-wrap:wrap;align-items:center;gap:8px;padding:8px 11px;border-bottom:1px solid var(--edge);flex:none}-.bar .h{font-size:11px;text-transform:uppercase;letter-spacing:.06em;color:var(--mut);font-weight:700}-.bar .sp{flex:1}-.lyrtog{display:inline-flex;align-items:center;gap:6px;font-size:11px;color:var(--mut);background:#1a2130;border:1px solid var(--edge);border-radius:999px;padding:3px 9px;cursor:pointer;user-select:none}-.lyrtog.on{color:var(--ink);border-color:#485162}.lyrtog:not(.on){opacity:.5}-.lyrtog .d{width:8px;height:8px;border-radius:50%;background:#485162}-.stage{flex:1;min-height:0;position:relative;overflow:hidden;background:var(--bg);cursor:grab;touch-action:none}-.stage.drag{cursor:grabbing}-.stage svg{position:absolute;inset:0;width:100%;height:100%}-.pingroup,.pad{cursor:pointer}-.pingroup.hi .pinvis{stroke:var(--hi)!important;stroke-width:7}-rect.pad.hi{stroke:var(--hi);stroke-width:.15;paint-order:stroke}-.lyr-off{display:none}-#tip{position:fixed;z-index:99;pointer-events:none;display:none;max-width:250px;background:#0d1117;border:1px solid var(--acc);border-radius:8px;padding:7px 10px;box-shadow:0 8px 26px #000a}-#tip .tn{font:700 12px ui-monospace,monospace;color:var(--accb)}-#tip .tt{font-size:10px;text-transform:uppercase;letter-spacing:.04em;color:var(--mut);margin-top:1px}-#tip .td{font-size:11px;color:var(--ink);margin-top:5px;line-height:1.4}-</style></head><body>-<div class=bar><span class=h>Schematic symbol</span><span class=sp></span></div>-<div class=stage id=stage><svg xmlns='http://www.w3.org/2000/svg' viewBox='-750 -200 1500 400' style='width:100%;height:100%'><rect x='-500.0' y='-150.0' width='1000.0' height='300.0' fill='#e35d5d22' stroke='#e35d5d' stroke-width='4'/><g class='pingroup' data-num='1' data-name='I'><line class='pinvis' x1='-700.0' y1='-50.0' x2='-500.0' y2='-50.0' stroke='#dfe4ec' stroke-width='4'/><line x1='-700.0' y1='-50.0' x2='-500.0' y2='-50.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-600.0' y='-5.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>1</text><text x='-470.0' y='-50.0' font-size='60' fill='#e6e9ef' text-anchor='start' dominant-baseline='central'>I</text><g class='pingroup' data-num='2' data-name='EN'><line class='pinvis' x1='-700.0' y1='50.0' x2='-500.0' y2='50.0' stroke='#dfe4ec' stroke-width='4'/><line x1='-700.0' y1='50.0' x2='-500.0' y2='50.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-600.0' y='95.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>2</text><text x='-470.0' y='50.0' font-size='60' fill='#e6e9ef' text-anchor='start' dominant-baseline='central'>EN</text><g class='pingroup' data-num='4' data-name='GND'><line class='pinvis' x1='700.0' y1='-50.0' x2='500.0' y2='-50.0' stroke='#dfe4ec' stroke-width='4'/><line x1='700.0' y1='-50.0' x2='500.0' y2='-50.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='600.0' y='-95.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>4</text><text x='470.0' y='-50.0' font-size='60' fill='#e6e9ef' text-anchor='end' dominant-baseline='central'>GND</text><g class='pingroup' data-num='3' data-name='Q'><line class='pinvis' x1='700.0' y1='50.0' x2='500.0' y2='50.0' stroke='#dfe4ec' stroke-width='4'/><line x1='700.0' y1='50.0' x2='500.0' y2='50.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='600.0' y='5.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>3</text><text x='470.0' y='50.0' font-size='60' fill='#e6e9ef' text-anchor='end' dominant-baseline='central'>Q</text></svg></div>-<div id=tip></div>-<script>-var KIND="symbol", MPN="RAY/NCV4266-2CST50T3G", PINS=[{"desc":"","name":"I","number":"1","type":""},{"desc":"","name":"EN","number":"2","type":""},{"desc":"","name":"GND","number":"4","type":""},{"desc":"","name":"Q","number":"3","type":""}];-var byNum={}; PINS.forEach(function(p){byNum[String(p.number)]=p;});-var stage=document.getElementById('stage'), svg=stage.querySelector('svg'), tip=document.getElementById('tip');-// ---- pan/zoom -----var vb=(svg.getAttribute('viewBox')||'0 0 100 100').split(/\s+/).map(Number), base=vb.slice();-function setVB(){svg.setAttribute('viewBox',vb.join(' '));}-stage.addEventListener('wheel',function(e){e.preventDefault();var r=stage.getBoundingClientRect();var mx=(e.clientX-r.left)/r.width,my=(e.clientY-r.top)/r.height;var f=e.deltaY<0?0.88:1.14;var nw=vb[2]*f,nh=vb[3]*f;vb[0]+=(vb[2]-nw)*mx;vb[1]+=(vb[3]-nh)*my;vb[2]=nw;vb[3]=nh;setVB();},{passive:false});-var pan=null;-stage.addEventListener('pointerdown',function(e){pan={x:e.clientX,y:e.clientY};stage.classList.add('drag');stage.setPointerCapture(e.pointerId);});-stage.addEventListener('pointermove',function(e){if(!pan)return;var r=stage.getBoundingClientRect();vb[0]-=(e.clientX-pan.x)/r.width*vb[2];vb[1]-=(e.clientY-pan.y)/r.height*vb[3];pan={x:e.clientX,y:e.clientY};setVB();});-function endPan(){pan=null;stage.classList.remove('drag');}-stage.addEventListener('pointerup',endPan);stage.addEventListener('pointerleave',endPan);-stage.addEventListener('dblclick',function(){vb=base.slice();setVB();});-// ---- cross-highlight bus -----function els(n){return [].slice.call(document.querySelectorAll('[data-num="'+n+'"]'));}-function clearHi(){[].slice.call(document.querySelectorAll('.hi')).forEach(function(e){e.classList.remove('hi');});}-function hi(n){els(n).forEach(function(e){e.classList.add('hi');});}-function post(n){try{parent.postMessage({type:'lbr-hover',pin:n===null?null:String(n),mpn:MPN},'*');}catch(_){}}-function showTip(n,x,y){var p=byNum[String(n)];if(!p)return;tip.innerHTML='<span class=tn></span><div class=tt></div><div class=td></div>';tip.querySelector('.tn').textContent=n+'  '+(p.name||'');tip.querySelector('.tt').textContent=p.type||'';var d=p.desc||'';if(d)tip.querySelector('.td').textContent=d;else tip.querySelector('.td').style.display='none';tip.style.display='block';tip.style.left=(x+14)+'px';tip.style.top=(y+12)+'px';}-[].slice.call(document.querySelectorAll('.pingroup,.pad')).forEach(function(g){-  var n=g.getAttribute('data-num');-  g.addEventListener('mouseenter',function(e){clearHi();hi(n);post(n);showTip(n,e.clientX,e.clientY);});-  g.addEventListener('mousemove',function(e){tip.style.left=(e.clientX+14)+'px';tip.style.top=(e.clientY+12)+'px';});-  g.addEventListener('mouseleave',function(){clearHi();post(null);tip.style.display='none';});-});-window.addEventListener('message',function(e){var d=e.data||{};if(d.type!=='lbr-hover')return;clearHi();if(d.pin!=null)hi(d.pin);});-// ---- footprint layer toggles -----[].slice.call(document.querySelectorAll('.lyrtog')).forEach(function(b){-  function apply(on){[].slice.call(document.querySelectorAll('.ly-'+b.getAttribute('data-lyr'))).forEach(function(el){el.classList.toggle('lyr-off',!on);});}-  apply(b.classList.contains('on'));-  b.addEventListener('click',function(){apply(b.classList.toggle('on'));});-});-// ---- auto-grow the host readme iframe -----function ph(){var h=Math.max(360,Math.min(16000,document.body.scrollHeight||420));parent.postMessage({type:'readme-height',height:h},'*');}-window.addEventListener('load',ph);setTimeout(ph,300);-</script>-</body></html>+<!doctype html><title>ncv4266-2cst50t3g</title>\ No newline at end of file