← Commit history

Set visibility: public

Ray ·84b9b67866 · ·parent cb786f3
1 file changed +8−5
page.json+8−5
@@ -32,7 +32,7 @@         "number": "1",         "name": "RESET",         "type": "output",-        "description": "Active-low open-drain N-channel MOSFET RESET output. Driven low when SENSE is below the threshold voltage V_IT or when MR is pulled low; releases after the programmed reset delay once SENSE > V_IT and MR is high. Requires an external pull-up resistor (10 k\u03a9-1 M\u03a9 recommended); low-level output voltage \u2264 0.3-0.4 V at 0.4-1.0 mA."+        "description": "Active-low open-drain N-channel MOSFET RESET output. Driven low when SENSE is below the threshold voltage V_IT or when MR is pulled low; releases after the programmed reset delay once SENSE > V_IT and MR is high. Requires an external pull-up resistor (10 kΩ-1 MΩ recommended); low-level output voltage ≤ 0.3-0.4 V at 0.4-1.0 mA."       },       {         "number": "2",@@ -44,13 +44,13 @@         "number": "3",         "name": "MR",         "type": "input",-        "description": "Manual Reset input, active low. Pulling MR low forces RESET low. MR is internally tied to VDD through a ~90 k\u03a9 pull-up resistor (R_MR), so it may be left floating if unused. V_IL \u2264 0.3\u00b7VDD, V_IH \u2265 0.7\u00b7VDD."+        "description": "Manual Reset input, active low. Pulling MR low forces RESET low. MR is internally tied to VDD through a ~90 kΩ pull-up resistor (R_MR), so it may be left floating if unused. V_IL ≤ 0.3·VDD, V_IH ≥ 0.7·VDD."       },       {         "number": "4",         "name": "CT",         "type": "passive",-        "description": "Reset Delay Time Setting pin. Connect a ground-referenced capacitor (\u2265100 pF) for a user-programmable reset delay (typ. 1.25 ms with 1 nF, up to ~10 s). Tying CT to VDD through a 40 k\u03a9-200 k\u03a9 resistor or leaving it open selects fixed reset delay times."+        "description": "Reset Delay Time Setting pin. Connect a ground-referenced capacitor (≥100 pF) for a user-programmable reset delay (typ. 1.25 ms with 1 nF, up to ~10 s). Tying CT to VDD through a 40 kΩ-200 kΩ resistor or leaving it open selects fixed reset delay times."       },       {         "number": "5",@@ -62,7 +62,7 @@         "number": "6",         "name": "VDD",         "type": "power_in",-        "description": "Supply voltage input, 1.6 V to 5.5 V operating range (absolute max 6.0 V). Place a 0.1 \u00b5F ceramic decoupling capacitor close to this pin. Quiescent supply current is typ. 1.6 \u00b5A."+        "description": "Supply voltage input, 1.6 V to 5.5 V operating range (absolute max 6.0 V). Place a 0.1 µF ceramic decoupling capacitor close to this pin. Quiescent supply current is typ. 1.6 µA."       }     ],     "provenance": {@@ -140,5 +140,8 @@     "docs/ncv308sn180t1g-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ]+  ],+  "visibility": {+    "public": true+  } }\ No newline at end of file