← Commit history
README.md+18−20
@@ -2,7 +2,7 @@  **onsemi** · Linear Voltage Regulators (LDO) · SOT-223-4 -NCV1117ST12T3G from onsemi, in a SOT-223-4. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.+NCV1117ST12T3G from onsemi, in a SOT-223-4. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.  ## Pinout @@ -11,7 +11,6 @@ NCV1117ST12T3G from onsemi, in a SOT-223-4. Pinout and pin descriptions extracte | 1 | Adjust/Ground | power_in | Adjust/Ground pin is the ground connection on fixed-voltage devices such as the 12 V NCV1117ST12T3G, and sets the output voltage on adjustable devices. | | 2 | Output | power_out | Output pin, also connected to the heatsink tab, which requires an output capacitor meeting the stated ESR limits for stability. | | 3 | Input | power_in | Input pin, which the regulator operates from with up to 20 V input per the maximum ratings. |-| 4 | TAB | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |  ## Key specifications @@ -20,7 +19,7 @@ NCV1117ST12T3G from onsemi, in a SOT-223-4. Pinout and pin descriptions extracte | Manufacturer | onsemi | | Package | SOT-223-4 | | Category | Power Management |-| Pins | 4 |+| Pins | 3 |  ## Electrical characteristics @@ -28,31 +27,30 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries  | Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page | |---|---|---|---|---|---|---|---|-| Output Voltage (25°C) | Vout | 11.88 | 12 | 12.12 | V | Vin = 14 V, Iout = 10 mA, TA = 25 °C | 3 |-| Output Voltage (over temperature) | Vout | 11.76 |  | 12.24 | V | Vin = 13.5 V to 20 V, Iout = 0 mA to 800 mA | 3 |-| Line Regulation | Regline |  | 1 | 7.5 | mV | Vin = 13.5 V to 20 V, Iout = 0 mA | 3 |-| Load Regulation | Regline |  | 16 | 28 | mV | Iout = 0 mA to 800 mA, Vin = 13.5 V | 3 |-| Dropout Voltage | Vin−Vout |  | 0.95 | 1.1 | V | Measured at Vout − 100 mV, Iout = 100 mA | 3 |-| Dropout Voltage | Vin−Vout |  | 1.01 | 1.15 | V | Measured at Vout − 100 mV, Iout = 500 mA | 3 |-| Dropout Voltage | Vin−Vout |  | 1.07 | 1.2 | V | Measured at Vout − 100 mV, Iout = 800 mA | 3 |-| Output Current Limit | Iout | 1000 | 1500 | 2200 | mA | Vin−Vout = 5.0 V, TA = 25°C | 3 |-| Quiescent Current | IQ |  | 6 | 10 | mA | 12 V (Vin = 20 V) | 4 |+| Output Voltage, 12 V (25 °C) | Vout | 11.88 | 12 | 12.12 | V | Vin = 14 V, Iout = 10 mA, TA = 25 °C | 3 |+| Output Voltage, 12 V (full temperature range) | Vout | 11.76 |  | 12.24 | V | Vin = 13.5 V to 20 V, Iout = 0 mA to 800 mA (Note 4) | 3 |+| Line Regulation, 12 V | Regline |  | 1 | 7.5 | mV | Vin = 13.5 V to 20 V, Iout = 0 mA | 3 |+| Load Regulation, 12 V | Regline |  | 16 | 28 | mV | Iout = 0 mA to 800 mA, Vin = 13.5 V | 3 |+| Dropout Voltage (Iout = 100 mA) | Vin-Vout |  | 0.95 | 1.1 | V | Measured at Vout − 100 mV, Iout = 100 mA | 3 |+| Dropout Voltage (Iout = 500 mA) | Vin-Vout |  | 1.01 | 1.15 | V | Measured at Vout − 100 mV, Iout = 500 mA | 3 |+| Dropout Voltage (Iout = 800 mA) | Vin-Vout |  | 1.07 | 1.2 | V | Measured at Vout − 100 mV, Iout = 800 mA | 3 |+| Output Current Limit | Iout | 1000 | 1500 | 2200 | mA | Vin−Vout = 5.0 V, TA = 25°C, Note 6 | 3 |+| Quiescent Current, 12 V | IQ |  | 6 | 10 | mA | Vin = 20 V | 4 | | Thermal Regulation |  |  | 0.01 | 0.1 | %/W | TA = 25°C, 30 ms Pulse | 4 |-| Ripple Rejection | RR | 50 | 54 |  | dB | 12 V; Vin−Vout = 6.4 V, Iout = 500 mA, 10 Vpp 120 Hz Sinewave | 4 | | Temperature Stability | ST |  | 0.5 |  | % |  | 4 | | Long Term Stability | St |  | 0.3 |  | % | TA = 25°C, 1000 Hrs End Point Measurement | 4 | | RMS Output Noise | N |  | 0.003 |  | %Vout | f = 10 Hz to 10 kHz | 4 |-| Input Voltage | Vin |  |  | 20 | V |  | 2 |+| Input Voltage | Vin |  |  | 20 | V | Note 1 | 2 | | Maximum Die Junction Temperature Range | TJ | -55 |  | 150 | °C |  | 2 | | Storage Temperature Range | Tstg | -65 |  | 150 | °C |  | 2 |-| Operating Ambient Temperature Range NCV1117 | TA | -40 |  | 125 | °C |  | 2 |-| Thermal Resistance, Junction-to-Ambient | RθJA |  | 160 |  | °C/W | Case 318H (SOT-223), Minimum Size Pad | 2 |-| Thermal Resistance, Junction-to-Case | RθJC |  | 15 |  | °C/W | Case 318H (SOT-223) | 2 |+| Operating Ambient Temperature Range (NCV1117) | TA | -40 |  | 125 | °C | NCV1117 grade | 2 |+| Thermal Resistance, Junction-to-Ambient, Minimum Size Pad (SOT-223) | RJA |  | 160 |  | °C/W | Case 318H (SOT-223), minimum size pad | 2 |+| Thermal Resistance, Junction-to-Case (SOT-223) | RJC |  | 15 |  | °C/W | Case 318H (SOT-223) | 2 |  ## CAD (KiCad official)  - Symbol: `NCV1117ST12T3G`-- Footprint: `Package_TO_SOT_SMD:SOT-223`+- Footprint: `Package_TO_SOT_SMD:SOT-223-3_TabPin2` - 3D model: SOT-223-4 (KiCad packages3D, STEP) - 3D model files: `ncv1117st12t3g-etched.step` / `ncv1117st12t3g-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ncv1117st12t3g.step` / `ncv1117st12t3g.glb` are the bare package body. @@ -60,8 +58,8 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries  Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [onsemi datasheet](https://www.onsemi.com/pdf/datasheet/ncv1117st12t3-d.pdf) (20 pp, sha256 `60b70c9651c46ad7`, retrieved 2026-10-31, tier: manufacturer)-- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **Datasheet:** [onsemi datasheet](https://www.onsemi.com/pdf/datasheet/ncp1117-d.pdf) (20 pp, sha256 `e2b4731d02a098c3`, retrieved 2026-11-13, tier: manufacturer)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - **CAD:** KiCad official libraries (CC-BY-SA 4.0).  [Datasheet PDF](docs/ncv1117st12t3g-datasheet.pdf)
docs/ncv1117st12t3g-datasheet.pdf+1−1
@@ -133738,7 +133738,7 @@ trailer << /Root 1 0 R /Info 6 0 R-/ID [<EF1882F015469AC0B0573F19B6285AC4> <EF1882F015469AC0B0573F19B6285AC4>]+/ID [<B5EBC1B2AB08874A5225D21B43B405A9> <B5EBC1B2AB08874A5225D21B43B405A9>] /Size 576 >> startxref
ncv1117st12t3g-hero.glb
⋯ 1 unchanged line ⋯
ncv1117st12t3g-hero.overlay.json+164−168
@@ -1,172 +1,168 @@ {-  "spec": "adom-hero 1.4",-  "mpn": "NCV1117ST12T3G",-  "kind": "component + footprint reference art",-  "board_use": false,-  "plane_z_mm": -0.02,-  "units": "metre",-  "upAxis": "Z",-  "layers": {-    "pad_outlines": {-      "material": "Footprint pads - teal dashed outlines - 50 percent opacity",-      "rgba": [-        0.0,-        0.902,-        0.863,-        0.5-      ],-      "pads": 4,-      "span_mm": 8.4,-      "dash_mm": 0.21,-      "gap_mm": 0.126,-      "pad_stroke_mm": 0.0504-    },-    "silkscreen": {-      "material": "Silkscreen reference lines - 30 percent opacity",-      "rgba": [-        0.92,-        0.96,-        1.0,-        0.3-      ],-      "footprint_items": 5,-      "pin1": {-        "source": "footprint silkscreen",-        "pad": "1"-      }-    },-    "signal_names": {-      "material": "Signal names - 50 percent opacity",-      "rgba": [-        0.92,-        0.96,-        1.0,-        0.5-      ],-      "font": "DejaVu Sans Mono",-      "labels": 4,-      "sides": "top + mirrored underside (single-sided)",-      "fallback_to_pad_number": 0-    }+ "spec": "adom-hero 1.4",+ "mpn": "NCV1117ST12T3G",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+  "pad_outlines": {+   "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+   "rgba": [+    0.0,+    0.902,+    0.863,+    0.5+   ],+   "pads": 4,+   "span_mm": 8.4,+   "dash_mm": 0.21,+   "gap_mm": 0.126,+   "pad_stroke_mm": 0.0504   },-  "align": {-    "ok": true,-    "centre_offset_mm": 0.0,-    "tolerance_mm": 0.664,-    "orientation_flipped": false,-    "contacts_bbox_mm": [-      -3.5,-      3.5,-      -2.684,-      2.684-    ],-    "pads_bbox_mm": [-      -4.15,-      4.15,-      -3.05,-      3.05-    ],-    "seating_z_mm": 0.0+  "silkscreen": {+   "material": "Silkscreen reference lines - 30 percent opacity",+   "rgba": [+    0.92,+    0.96,+    1.0,+    0.3+   ],+   "footprint_items": 5,+   "pin1": {+    "source": "footprint silkscreen",+    "pad": "1"+   }   },-  "sources": {-    "glb": "ncv1117st12t3g-etched.glb",-    "glb_sha256": "9f7ed2c128943861bda332d5180898d0613a03cb4fc2a98d1ace0b361ca503d5",-    "footprint": "ncv1117st12t3g.kicad_mod",-    "footprint_sha256": "c363b829e802b2b8683df034215484eea1362537e715d9071b66b9d1a5710c66",-    "pins": "page.json component.pins",-    "pins_sha256": "1fd5daa849035dd46ce767aa9c728388a80512938d9c619192d6214d8becf448"-  },-  "generator": "adom-wiki 1.8.4 (component_hero)",-  "labels": [-    {-      "pad": "1",-      "text": "Adjust/Ground",-      "x": -4.3,-      "y": -2.3,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "2",-      "text": "Output",-      "x": -4.3,-      "y": 0.0,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "3",-      "text": "Input",-      "x": -4.3,-      "y": 2.3,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "4",-      "text": "TAB",-      "x": 4.3,-      "y": 0.0,-      "align": "left",-      "vertical": false,-      "h": 0.6-    }+  "signal_names": {+   "material": "Signal names - 50 percent opacity",+   "rgba": [+    0.92,+    0.96,+    1.0,+    0.5+   ],+   "font": "DejaVu Sans Mono",+   "labels": 3,+   "sides": "top + mirrored underside (single-sided)",+   "omitted": null,+   "fallback_to_pad_number": 0+  }+ },+ "align": {+  "ok": true,+  "board_underside": false,+  "electrical_pads_without_contact": [],+  "mounting_pads_left_out": [],+  "centre_offset_mm": 0.0,+  "over_pads": true,+  "tolerance_mm": 0.664,+  "orientation_flipped": false,+  "contacts_bbox_mm": [+   -3.5,+   3.5,+   -2.684,+   2.684+  ],+  "pads_bbox_mm": [+   -4.15,+   4.15,+   -3.05,+   3.05   ],-  "pads": [-    {-      "number": "1",-      "shape": "roundrect",-      "center_mm": [-        -3.15,-        -2.3-      ],-      "size_mm": [-        2.0,-        1.5-      ],-      "rot": 0.0-    },-    {-      "number": "2",-      "shape": "roundrect",-      "center_mm": [-        -3.15,-        0.0-      ],-      "size_mm": [-        2.0,-        1.5-      ],-      "rot": 0.0-    },-    {-      "number": "3",-      "shape": "roundrect",-      "center_mm": [-        -3.15,-        2.3-      ],-      "size_mm": [-        2.0,-        1.5-      ],-      "rot": 0.0-    },-    {-      "number": "4",-      "shape": "roundrect",-      "center_mm": [-        3.15,-        0.0-      ],-      "size_mm": [-        2.0,-        3.8-      ],-      "rot": 0.0-    }-  ]-}+  "seating_z_mm": 0.0+ },+ "sources": {+  "glb": "ncv1117st12t3g-etched.glb",+  "glb_sha256": "9f7ed2c128943861bda332d5180898d0613a03cb4fc2a98d1ace0b361ca503d5",+  "footprint": "ncv1117st12t3g.kicad_mod",+  "footprint_sha256": "5f6cad94d6c821d01d360a4a09cca4b89e63ae0ce12c33d1dd0ba4e30e86c523",+  "pins": "page.json component.pins",+  "pins_sha256": "d9268b0780b9899cd1cb81a5e87fa011ab2b6c43de2529425c8ce8ac0741e0f6"+ },+ "generator": "factory/hero_glb.py",+ "labels": [+  {+   "pad": "1",+   "text": "Adjust/Ground",+   "x": -4.3,+   "y": -2.3,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "2",+   "text": "Output",+   "x": -4.3,+   "y": 0.0,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "3",+   "text": "Input",+   "x": -4.3,+   "y": 2.3,+   "align": "right",+   "vertical": false,+   "h": 0.6+  }+ ],+ "pads": [+  {+   "number": "1",+   "shape": "roundrect",+   "center_mm": [+    -3.15,+    -2.3+   ],+   "size_mm": [+    2.0,+    1.5+   ],+   "rot": 0.0+  },+  {+   "number": "2",+   "shape": "roundrect",+   "center_mm": [+    -3.15,+    0.0+   ],+   "size_mm": [+    2.0,+    1.5+   ],+   "rot": 0.0+  },+  {+   "number": "2",+   "shape": "roundrect",+   "center_mm": [+    3.15,+    0.0+   ],+   "size_mm": [+    2.0,+    3.8+   ],+   "rot": 0.0+  },+  {+   "number": "3",+   "shape": "roundrect",+   "center_mm": [+    -3.15,+    2.3+   ],+   "size_mm": [+    2.0,+    1.5+   ],+   "rot": 0.0+  }+ ]+}\ No newline at end of file
ncv1117st12t3g.kicad_mod+32−32
@@ -1,4 +1,4 @@-(footprint "SOT-223"+(footprint "SOT-223-3_TabPin2" 	(version 20260206) 	(generator "pcbnew") 	(generator_version "10.0")@@ -8,7 +8,7 @@ 	(property "Reference" "REF**" 		(at 0 -4.5 0) 		(layer "F.SilkS")-		(uuid "4497a1e1-94b1-4cba-abfc-02d82a04371f")+		(uuid "095b50a5-76ce-476b-aa10-37a37fa441f1") 		(effects 			(font 				(size 1 1)@@ -16,10 +16,10 @@ 			) 		) 	)-	(property "Value" "SOT-223"+	(property "Value" "SOT-223-3_TabPin2" 		(at 0 4.5 0) 		(layer "F.Fab")-		(uuid "222a057b-4f1f-481e-81c0-82276f6e2fbf")+		(uuid "a763838d-1dc3-4eda-bbc0-fbcf1edf1449") 		(effects 			(font 				(size 1 1)@@ -27,12 +27,12 @@ 			) 		) 	)-	(property "Datasheet" "https://www.onsemi.com/pdf/datasheet/ncv1117st12t3-d.pdf"+	(property "Datasheet" "" 		(at 0 0 0) 		(unlocked yes) 		(layer "F.Fab") 		(hide yes)-		(uuid "cf35375b-a35a-4ccf-b401-52356d4eb3ab")+		(uuid "0fecb949-4744-4c65-8091-70f595847ba4") 		(effects 			(font 				(size 1.27 1.27)@@ -45,7 +45,7 @@ 		(unlocked yes) 		(layer "F.Fab") 		(hide yes)-		(uuid "e0b857b7-85f4-442e-9375-43b7f0b65024")+		(uuid "7dd6192e-e612-428f-816e-6f28697542d5") 		(effects 			(font 				(size 1.27 1.27)@@ -63,7 +63,7 @@ 			(type solid) 		) 		(layer "F.SilkS")-		(uuid "10341b74-de1d-44f8-b919-9dc7b01c77a6")+		(uuid "e98ec803-a6f4-4196-9fa0-d9f7619efa9d") 	) 	(fp_line 		(start -1.85 3.41)@@ -73,7 +73,7 @@ 			(type solid) 		) 		(layer "F.SilkS")-		(uuid "9eaaee9c-d787-4c4e-9409-486f5d803253")+		(uuid "6e43f798-7915-403c-b947-4851bde35045") 	) 	(fp_line 		(start 1.91 -3.41)@@ -83,7 +83,7 @@ 			(type solid) 		) 		(layer "F.SilkS")-		(uuid "668bbda1-c7e1-4e23-9d62-dd4d052018b0")+		(uuid "ddfc40c4-e33c-493e-b735-24282440d539") 	) 	(fp_line 		(start 1.91 3.41)@@ -93,7 +93,7 @@ 			(type solid) 		) 		(layer "F.SilkS")-		(uuid "7b7161b8-bc72-4822-9d67-8c4bc120433f")+		(uuid "79366377-6a9f-460a-b0d1-788467590954") 	) 	(fp_poly 		(pts@@ -105,27 +105,27 @@ 		) 		(fill yes) 		(layer "F.SilkS")-		(uuid "818bd365-7a79-40a2-b037-dacc75b8af05")+		(uuid "27420593-f422-495a-9e17-88a99bcd8a3d") 	) 	(fp_line-		(start -1.85 -2.3)+		(start -1.85 -2.35) 		(end -1.85 3.35) 		(stroke 			(width 0.1) 			(type solid) 		) 		(layer "F.Fab")-		(uuid "2a9ca989-6b38-468d-a714-75a033988b2c")+		(uuid "659fc817-2286-4dd8-ba60-8e62262ce6cc") 	) 	(fp_line-		(start -1.85 -2.3)-		(end -0.8 -3.35)+		(start -1.85 -2.35)+		(end -0.85 -3.35) 		(stroke 			(width 0.1) 			(type solid) 		) 		(layer "F.Fab")-		(uuid "bcb7341f-c5b7-4cf0-ac84-66c574c5e61c")+		(uuid "f393364a-2641-4746-ba4c-6509ea1de503") 	) 	(fp_line 		(start -1.85 3.35)@@ -135,17 +135,17 @@ 			(type solid) 		) 		(layer "F.Fab")-		(uuid "c011dc66-40ad-4f1e-a34f-e251dae0cd31")+		(uuid "27db54e0-f4a8-4972-bcbc-256787416dcd") 	) 	(fp_line-		(start -0.8 -3.35)+		(start -0.85 -3.35) 		(end 1.85 -3.35) 		(stroke 			(width 0.1) 			(type solid) 		) 		(layer "F.Fab")-		(uuid "80711826-0dce-449b-af78-388864936159")+		(uuid "be579ebe-38db-4860-98f0-9f530f704760") 	) 	(fp_line 		(start 1.85 -3.35)@@ -155,12 +155,12 @@ 			(type solid) 		) 		(layer "F.Fab")-		(uuid "a66ee799-671f-4902-ac92-f94d39f82acf")+		(uuid "9d748ff0-f43a-42f3-a9ff-3a463972b1ca") 	) 	(fp_text user "${REFERENCE}" 		(at 0 0 90) 		(layer "F.Fab")-		(uuid "184c46b5-a004-48e0-8f63-d7d63dc324be")+		(uuid "aff1cd04-29c5-47f0-8349-1badf43ec67b") 		(effects 			(font 				(size 0.8 0.8)@@ -173,28 +173,28 @@ 		(size 2 1.5) 		(layers "F.Cu" "F.Mask" "F.Paste") 		(roundrect_rratio 0.25)-		(uuid "ea891fee-0855-44cc-8da9-0c7b9e3b1505")+		(uuid "6c38c733-73aa-46ef-9aa8-0adc47a79448") 	) 	(pad "2" smd roundrect 		(at -3.15 0) 		(size 2 1.5) 		(layers "F.Cu" "F.Mask" "F.Paste") 		(roundrect_rratio 0.25)-		(uuid "2adbaf0f-7617-4618-9438-78a8bd4ec4b2")+		(uuid "553b4aa3-b4fc-45ee-9bbe-5eb8183ee7d8") 	)-	(pad "3" smd roundrect-		(at -3.15 2.3)-		(size 2 1.5)+	(pad "2" smd roundrect+		(at 3.15 0)+		(size 2 3.8) 		(layers "F.Cu" "F.Mask" "F.Paste") 		(roundrect_rratio 0.25)-		(uuid "1b42a1a5-e735-42f2-b87a-1df5a461081d")+		(uuid "118e82e2-9099-4e46-a269-1e2cb8448d5e") 	)-	(pad "4" smd roundrect-		(at 3.15 0)-		(size 2 3.8)+	(pad "3" smd roundrect+		(at -3.15 2.3)+		(size 2 1.5) 		(layers "F.Cu" "F.Mask" "F.Paste") 		(roundrect_rratio 0.25)-		(uuid "023f2cc5-97fb-4421-8e37-e8aa385789b4")+		(uuid "5046df04-2b74-45a5-867e-e33a5e51e59c") 	) 	(embedded_fonts no) 	(model "${KICAD10_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-223.step"
ncv1117st12t3g.kicad_sym+1−5
@@ -16,11 +16,7 @@       (name "Output" (effects (font (size 1.27 1.27))))       (number "2" (effects (font (size 1.27 1.27))))     )-    (pin passive line (at 17.78 0.00 180) (length 5.08)-      (name "TAB" (effects (font (size 1.27 1.27))))-      (number "4" (effects (font (size 1.27 1.27))))-    )-    (pin power_in line (at 17.78 -2.54 180) (length 5.08)+    (pin power_in line (at 17.78 0.00 180) (length 5.08)       (name "Input" (effects (font (size 1.27 1.27))))       (number "3" (effects (font (size 1.27 1.27))))     )
ncv1117st12t3g.lbr+8−10
@@ -52,12 +52,12 @@ <library> <description>onsemi Linear Voltage Regulators (LDO), SOT-223-4. Pinout cross-checked by two models against the datasheet</description> <packages>-<package name="SOT-223">+<package name="SOT-223-3_TabPin2">   <description>4 pads, 8.3 x 6.1 mm. module CMS SOT223 4 pins</description>   <smd name="1" x="-3.1500" y="2.3000" dx="2.0000" dy="1.5000" layer="1" roundness="50"/>   <smd name="2" x="-3.1500" y="-0.0000" dx="2.0000" dy="1.5000" layer="1" roundness="50"/>+  <smd name="2@2" x="3.1500" y="-0.0000" dx="2.0000" dy="3.8000" layer="1" roundness="50"/>   <smd name="3" x="-3.1500" y="-2.3000" dx="2.0000" dy="1.5000" layer="1" roundness="50"/>-  <smd name="4" x="3.1500" y="-0.0000" dx="2.0000" dy="3.8000" layer="1" roundness="50"/>   <polygon width="0.1200" layer="21">     <vertex x="-3.1300" y="3.3100"/>     <vertex x="-3.3700" y="3.6400"/>@@ -68,10 +68,10 @@   <wire x1="-1.8500" y1="-3.4100" x2="1.9100" y2="-3.4100" width="0.1200" layer="21"/>   <wire x1="1.9100" y1="3.4100" x2="1.9100" y2="2.1500" width="0.1200" layer="21"/>   <wire x1="1.9100" y1="-3.4100" x2="1.9100" y2="-2.1500" width="0.1200" layer="21"/>-  <wire x1="-1.8500" y1="2.3000" x2="-1.8500" y2="-3.3500" width="0.1000" layer="51"/>-  <wire x1="-1.8500" y1="2.3000" x2="-0.8000" y2="3.3500" width="0.1000" layer="51"/>+  <wire x1="-1.8500" y1="2.3500" x2="-1.8500" y2="-3.3500" width="0.1000" layer="51"/>+  <wire x1="-1.8500" y1="2.3500" x2="-0.8500" y2="3.3500" width="0.1000" layer="51"/>   <wire x1="-1.8500" y1="-3.3500" x2="1.8500" y2="-3.3500" width="0.1000" layer="51"/>-  <wire x1="-0.8000" y1="3.3500" x2="1.8500" y2="3.3500" width="0.1000" layer="51"/>+  <wire x1="-0.8500" y1="3.3500" x2="1.8500" y2="3.3500" width="0.1000" layer="51"/>   <wire x1="1.8500" y1="3.3500" x2="1.8500" y2="-3.3500" width="0.1000" layer="51"/>   <text x="0" y="4.010" size="1.27" layer="25" align="bottom-center">&gt;NAME</text>   <text x="0" y="-4.010" size="1.27" layer="27" align="top-center">&gt;VALUE</text>@@ -88,8 +88,7 @@   <text x="0.0000" y="-7.6200" size="1.27" layer="96" align="center">&gt;VALUE</text>   <pin name="Adjust/Ground" x="-17.78" y="0" length="middle" direction="pwr"/>   <pin name="Output" x="-17.78" y="-2.54" length="middle" direction="out"/>-  <pin name="TAB" x="17.78" y="0" length="middle" direction="pas" rot="R180"/>-  <pin name="Input" x="17.78" y="-2.54" length="middle" direction="pwr" rot="R180"/>+  <pin name="Input" x="17.78" y="0" length="middle" direction="pwr" rot="R180"/> </symbol> </symbols> <devicesets>@@ -99,11 +98,10 @@     <gate name="G$1" symbol="NCV1117ST12T3G" x="0" y="0"/>   </gates>   <devices>-    <device name="" package="SOT-223">+    <device name="" package="SOT-223-3_TabPin2">       <connects>         <connect gate="G$1" pin="Adjust/Ground" pad="1"/>-        <connect gate="G$1" pin="Output" pad="2"/>-        <connect gate="G$1" pin="TAB" pad="4"/>+        <connect gate="G$1" pin="Output" pad="2 2@2"/>         <connect gate="G$1" pin="Input" pad="3"/>       </connects>       <technologies>
package.json+15−37
@@ -1,8 +1,8 @@ {   "slug": "ncv1117st12t3g",-  "version": "0.1.0",+  "version": "0.2.0",   "type": "component",-  "description": "onsemi Linear Voltage Regulators (LDO), SOT-223-4. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "description": "onsemi Linear Voltage Regulators (LDO), SOT-223-4. Pinout settled in review by an AI reviewer against the manufacturer's datasheet, KiCad symbol/footprint/3D.",   "tags": [     "component",     "power management",@@ -28,22 +28,21 @@     "viewers/symbol.html",     "viewers/footprint.html",     "ncv1117st12t3g-hero.glb",-    "ncv1117st12t3g-hero.overlay.json",-    "ncv1117st12t3g-etched.glb"+    "ncv1117st12t3g-hero.overlay.json"   ],   "component": {     "mpn": "NCV1117ST12T3G",     "manufacturer": "onsemi",     "package": "SOT-223-4",-    "pin_count": 4,+    "pin_count": 3,     "category": "Power Management",     "subcategory": "Linear Voltage Regulators (LDO)",-    "datasheet": "https://www.onsemi.com/pdf/datasheet/ncv1117st12t3-d.pdf",+    "datasheet": "https://www.onsemi.com/pdf/datasheet/ncp1117-d.pdf",     "parts": {       "symbol": "ncv1117st12t3g.kicad_sym",       "footprint": "ncv1117st12t3g.kicad_mod",       "model_3d": "ncv1117st12t3g-hero.glb",-      "model_3d_plain": "ncv1117st12t3g-etched.glb",+      "model_3d_plain": "ncv1117st12t3g.glb",       "model_3d_step": "ncv1117st12t3g-etched.step",       "model_3d_step_plain": "ncv1117st12t3g.step",       "lbr": "ncv1117st12t3g.lbr"@@ -54,7 +53,7 @@       "mouser": "863-NCV1117ST12T3G"     },     "distributor_check": {-      "checked_at": "2026-10-31T18:35:32Z",+      "checked_at": "2026-11-13T01:55:42Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "NCV1117ST12T3GOSTR-ND",@@ -83,41 +82,20 @@         "name": "Input",         "type": "power_in",         "description": "Input pin, which the regulator operates from with up to 20 V input per the maximum ratings."-      },-      {-        "number": "4",-        "name": "TAB",-        "type": "passive",-        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."       }     ],     "provenance": {-      "extractor": "extract_pins 0.3",-      "factory_chain": {-        "factory": "2.0.0",-        "extractor": "extract_pins 0.3",-        "primary_model": "claude-haiku-5-5",-        "primary_mode": "text",-        "consensus_model": "claude-sonnet-5-5",-        "consensus": "agreed",-        "guards": "pin_guards 0.1: passed",-        "guard_notes": [-          "extractor flagged: The package hint says SOT-223-4, but the datasheet pin configuration (page 1) shows only three numbe"-        ],-        "pages_sent": 20,-        "cost_usd": 0.0259,-        "at": "2026-10-31T18:35:12"-      },+      "extractor": "ds2sf",       "datasheet": {-        "url": "https://www.onsemi.com/pdf/datasheet/ncv1117st12t3-d.pdf",+        "url": "https://www.onsemi.com/pdf/datasheet/ncp1117-d.pdf",         "pages": 20,-        "sha256": "60b70c9651c46ad7",+        "sha256": "e2b4731d02a098c3",         "source_tier": "mfr"       },       "cad": "KiCad official (CC-BY-SA 4.0)",       "pins": {-        "total": 4,-        "described": 4,+        "total": 3,+        "described": 3,         "cites_pages": true,         "refuses_to_fabricate": true       }@@ -143,7 +121,7 @@         "centre_offset_mm": 0.0,         "footprint_binding": "identity",         "sha256": "77ad6dbacc493cb619c728f26d2ddcf461eb0feb6b977b47d01d51e67016f654",-        "checked": "2026-10-31",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -161,8 +139,8 @@         "zmin_mm": -0.0,         "centre_offset_mm": 0.0,         "footprint_binding": "identity",-        "sha256": "6b49991c0f7b6f201341dfaac2c4dc0bb10e7374d430b35c2eeaab72c0f8caeb",-        "checked": "2026-10-31",+        "sha256": "b2160b7666b35febc625c449172be0bba71712b64f2f96f3c171f8bf681a1ba6",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ]
page.json+17−39
@@ -4,7 +4,7 @@   "slug": "ncv1117st12t3g",   "title": "NCV1117ST12T3G",   "brief": "onsemi Linear Voltage Regulators (LDO), SOT-223-4. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",-  "version": "0.1.0",+  "version": "0.2.0",   "license": "CC-BY-SA-4.0",   "tags": [     "component",@@ -17,15 +17,15 @@     "mpn": "NCV1117ST12T3G",     "manufacturer": "onsemi",     "package": "SOT-223-4",-    "pin_count": 4,+    "pin_count": 3,     "category": "Power Management",     "subcategory": "Linear Voltage Regulators (LDO)",-    "datasheet": "https://www.onsemi.com/pdf/datasheet/ncv1117st12t3-d.pdf",+    "datasheet": "https://www.onsemi.com/pdf/datasheet/ncp1117-d.pdf",     "parts": {       "symbol": "ncv1117st12t3g.kicad_sym",       "footprint": "ncv1117st12t3g.kicad_mod",       "model_3d": "ncv1117st12t3g-hero.glb",-      "model_3d_plain": "ncv1117st12t3g-etched.glb",+      "model_3d_plain": "ncv1117st12t3g.glb",       "model_3d_step": "ncv1117st12t3g-etched.step",       "model_3d_step_plain": "ncv1117st12t3g.step",       "lbr": "ncv1117st12t3g.lbr"@@ -36,7 +36,7 @@       "mouser": "863-NCV1117ST12T3G"     },     "distributor_check": {-      "checked_at": "2026-10-31T18:35:32Z",+      "checked_at": "2026-11-13T01:55:42Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "NCV1117ST12T3GOSTR-ND",@@ -65,41 +65,20 @@         "name": "Input",         "type": "power_in",         "description": "Input pin, which the regulator operates from with up to 20 V input per the maximum ratings."-      },-      {-        "number": "4",-        "name": "TAB",-        "type": "passive",-        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."       }     ],     "provenance": {-      "extractor": "extract_pins 0.3",-      "factory_chain": {-        "factory": "2.0.0",-        "extractor": "extract_pins 0.3",-        "primary_model": "claude-haiku-5-5",-        "primary_mode": "text",-        "consensus_model": "claude-sonnet-5-5",-        "consensus": "agreed",-        "guards": "pin_guards 0.1: passed",-        "guard_notes": [-          "extractor flagged: The package hint says SOT-223-4, but the datasheet pin configuration (page 1) shows only three numbe"-        ],-        "pages_sent": 20,-        "cost_usd": 0.0259,-        "at": "2026-10-31T18:35:12"-      },+      "extractor": "ds2sf",       "datasheet": {-        "url": "https://www.onsemi.com/pdf/datasheet/ncv1117st12t3-d.pdf",+        "url": "https://www.onsemi.com/pdf/datasheet/ncp1117-d.pdf",         "pages": 20,-        "sha256": "60b70c9651c46ad7",+        "sha256": "e2b4731d02a098c3",         "source_tier": "mfr"       },       "cad": "KiCad official (CC-BY-SA 4.0)",       "pins": {-        "total": 4,-        "described": 4,+        "total": 3,+        "described": 3,         "cites_pages": true,         "refuses_to_fabricate": true       }@@ -125,7 +104,7 @@         "centre_offset_mm": 0,         "footprint_binding": "identity",         "sha256": "77ad6dbacc493cb619c728f26d2ddcf461eb0feb6b977b47d01d51e67016f654",-        "checked": "2026-10-31",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -143,8 +122,8 @@         "zmin_mm": 0,         "centre_offset_mm": 0,         "footprint_binding": "identity",-        "sha256": "6b49991c0f7b6f201341dfaac2c4dc0bb10e7374d430b35c2eeaab72c0f8caeb",-        "checked": "2026-10-31",+        "sha256": "b2160b7666b35febc625c449172be0bba71712b64f2f96f3c171f8bf681a1ba6",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ]@@ -438,10 +417,9 @@     "viewers/symbol.html",     "viewers/footprint.html",     "ncv1117st12t3g-hero.glb",-    "ncv1117st12t3g-hero.overlay.json",-    "ncv1117st12t3g-etched.glb"+    "ncv1117st12t3g-hero.overlay.json"   ],-  "visibility": {-    "public": true-  }+  "visibility": "public",+  "description": "onsemi Linear Voltage Regulators (LDO), SOT-223-4. Pinout settled in review by an AI reviewer against the manufacturer's datasheet, KiCad symbol/footprint/3D.",+  "org": "adom" }\ No newline at end of file