← Commit history
page.json+9−6@@ -38,7 +38,7 @@ "number": "2", "name": "VIN", "type": "power_in",- "description": "Main input supply, 4.5 V to 18 V. Powers internal control circuitry (monitored by voltage comparators), the internal power PMOS switch, and the internal linear regulator output. Must be decoupled close to the pin (e.g. 22 \u00b5F) due to high di/dt edges."+ "description": "Main input supply, 4.5 V to 18 V. Powers internal control circuitry (monitored by voltage comparators), the internal power PMOS switch, and the internal linear regulator output. Must be decoupled close to the pin (e.g. 22 µF) due to high di/dt edges." }, { "number": "3",@@ -56,25 +56,25 @@ "number": "5", "name": "COMP", "type": "output",- "description": "Loop compensation node - output of the transconductance error amplifier (GM \u2248 201 \u00b5S). Connect an R-C network from COMP to AGND to compensate the current-mode control loop; place components as close to the pin as possible."+ "description": "Loop compensation node - output of the transconductance error amplifier (GM ≈ 201 µS). Connect an R-C network from COMP to AGND to compensate the current-mode control loop; place components as close to the pin as possible." }, { "number": "6", "name": "EN", "type": "input",- "description": "Enable input (threshold \u2248 1.41 V, abs max VIN + 0.3 V). Pull high to enable the converter, low to disable it. Must not be left floating."+ "description": "Enable input (threshold ≈ 1.41 V, abs max VIN + 0.3 V). Pull high to enable the converter, low to disable it. Must not be left floating." }, { "number": "7", "name": "PG", "type": "output",- "description": "Power-Good open-drain output (500 \u00b5A pull-down, abs max VIN + 0.3 V). Asserts when the output is inside the power-good window (~728 mV low / ~867 mV high thresholds on FB). If unused, may be tied to VSW for thermal relief - but not when the application turns on into a pre-bias."+ "description": "Power-Good open-drain output (500 µA pull-down, abs max VIN + 0.3 V). Asserts when the output is inside the power-good window (~728 mV low / ~867 mV high thresholds on FB). If unused, may be tied to VSW for thermal relief - but not when the application turns on into a pre-bias." }, { "number": "8", "name": "VSW", "type": "power_out",- "description": "Switch node - common drain of the internal high-side PMOS and low-side NMOS FETs (RDS(on) \u2248 90 m\u03a9 HS / 25 m\u03a9 LS at VIN = 12 V). Connect to the external inductor. At switch-off the inductor drives this pin below ground through the NMOS body diode with high dv/dt."+ "description": "Switch node - common drain of the internal high-side PMOS and low-side NMOS FETs (RDS(on) ≈ 90 mΩ HS / 25 mΩ LS at VIN = 12 V). Connect to the external inductor. At switch-off the inductor drives this pin below ground through the NMOS body diode with high dv/dt." } ], "provenance": {@@ -148,5 +148,8 @@ "docs/ncp3170adr2g-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }