← Commit history
ncp177amx120tcg: restore the component block (pinout + model declarations) from this page's own README and symbol
1 file changed
+58−1
page.json+58−1@@ -33,5 +33,62 @@ "author": { "name": "Ray", "email": "[email protected]"+ },+ "component": {+ "mpn": "NCP177AMX120TCG",+ "manufacturer": "onsemi",+ "package": "XDFN-4-EP(1x1)",+ "pin_count": 5,+ "category": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",+ "datasheet": "https://www.onsemi.com/pdf/datasheet/ncp177amx120tc-d.pdf",+ "parts": {+ "symbol": "ncp177amx120tcg.kicad_sym",+ "footprint": "ncp177amx120tcg.kicad_mod",+ "model_3d": "ncp177amx120tcg-etched.glb",+ "model_3d_plain": "ncp177amx120tcg.glb",+ "model_3d_step": "ncp177amx120tcg-etched.step",+ "model_3d_step_plain": "ncp177amx120tcg.step",+ "lbr": "ncp177amx120tcg.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "OUT",+ "type": "power_out",+ "description": "Regulated output voltage pin. Fixed 1.20 V nominal (AMX120TCG option) with ±0.8% accuracy at Tj = 25 C, sourcing up to 500 mA. Requires a 1 uF ceramic (X7R/X5R) output capacitor placed as close as possible to this pin and GND; minimum effective capacitance 0.8 uF, max ESR 0.5 ohm. On A-version an internal ~60 ohm active-discharge FET pulls this pin to GND when EN is low."+ },+ {+ "number": "2",+ "name": "GND",+ "type": "power_in",+ "description": "Power-supply ground / device reference. Should be connected to the ground plane together with the exposed pad for good thermal dissipation."+ },+ {+ "number": "3",+ "name": "EN",+ "type": "input",+ "description": "Active-high enable input. VENH >= 1.0 V enables the regulator; VENL <= 0.4 V disables it (and engages the ~60 ohm output active-discharge on the A-version). Absolute max -0.3 V to 6.0 V; input current 0.15 uA typ at 5.5 V. An internal ~300 nA pull-down keeps the part off if EN is left floating; tie EN to IN if the enable function is unused."+ },+ {+ "number": "4",+ "name": "IN",+ "type": "power_in",+ "description": "Power-supply input voltage. Operating range 1.6 V to 5.5 V (absolute max -0.3 V to 6.0 V). Requires a 1 uF or larger ceramic X7R/X5R input capacitor placed close to this pin and GND to ensure stability and provide a low-impedance path for AC noise."+ },+ {+ "number": "EP",+ "name": "EPAD",+ "type": "passive",+ "description": "Exposed thermal pad on the package underside. Must be tied to the ground plane for proper power dissipation (RθJA = 223 C/W on the JEDEC board). Electrically the datasheet does not designate it as a signal pin, but it should be connected to GND.",+ "thermal_pad": true+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ } }-}+}