← Commit history
page.json+116−8@@ -1,13 +1,126 @@ {+ "schema_version": 1,+ "type": "component", "slug": "ncp1654bd200r2g",+ "title": "NCP1654BD200R2G",+ "brief": "onsemi AC-DC Controllers and Regulators, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "version": "0.1.0",- "type": "component",- "description": "onsemi AC-DC Controllers and Regulators, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "license": "CC-BY-SA-4.0", "tags": [ "component", "pmic", "ncp1654bd200r2g" ],+ "component": {+ "mpn": "NCP1654BD200R2G",+ "manufacturer": "onsemi",+ "package": "SOIC-8",+ "pin_count": 8,+ "category": "PMIC",+ "subcategory": "AC-DC Controllers and Regulators",+ "datasheet": "https://www.onsemi.com/pdf/datasheet/ncp1654bd200r2-d.pdf",+ "parts": {+ "symbol": "ncp1654bd200r2g.kicad_sym",+ "footprint": "ncp1654bd200r2g.kicad_mod",+ "model_3d": "ncp1654bd200r2g.glb",+ "model_3d_step": "ncp1654bd200r2g.step",+ "lbr": "ncp1654bd200r2g.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "GND",+ "type": "power_in",+ "description": "Device ground reference. Return path for VCC supply, gate drive current, and all internal analog/digital circuitry."+ },+ {+ "number": "2",+ "name": "Vin",+ "type": "output",+ "description": "Multiplier Voltage output (VM). Provides the voltage used for PFC duty-cycle modulation; input impedance is proportional to an external resistor RM connected here. An external capacitor CM to this pin selects average current mode; without CM, the device operates in peak current mode."+ },+ {+ "number": "3",+ "name": "CS",+ "type": "input",+ "description": "Current Sense Input. Sources a current ICS proportional to the boost inductor current IL; used for overcurrent protection (OCP, threshold ~200 \u03bcA), overpower limitation (OPL) and PFC duty-cycle modulation. When ICS exceeds ~200 \u03bcA the drive output is disabled."+ },+ {+ "number": "4",+ "name": "VBO",+ "type": "input",+ "description": "Brown-Out / Input voltage sense. Connect to a resistor divider from the rectified input voltage to ground with a filter capacitor; measures a voltage proportional to the RMS input for brown-out detection (VBOL 0.7 V typ, VBOH 1.3 V typ), overpower limitation and duty-cycle modulation. When VBO < VBOL the driver is held low until VBO > VBOH."+ },+ {+ "number": "5",+ "name": "Vcontrol",+ "type": "bidirectional",+ "description": "Control Voltage / Soft-Start pin. Voltage on this pin (typ 0.6-3.6 V) directly controls the input impedance of the regulation loop; connect external type-2 compensation network here to limit Vcontrol bandwidth below ~20 Hz for near-unity power factor. Also implements soft-start; no drive output until Vcontrol > Vcontrol(min)."+ },+ {+ "number": "6",+ "name": "VFB",+ "type": "input",+ "description": "Feedback / Shutdown input. Receives feedback signal proportional to the PFC output voltage for regulation, overvoltage protection (OVP trips at 105% VREF), and undervoltage protection (UVP). When VFB < 8% VREF the device enters low-consumption shutdown."+ },+ {+ "number": "7",+ "name": "VCC",+ "type": "power_in",+ "description": "Positive supply voltage for the IC. Startup threshold (VCC rising) 10.5 V typ, UVLO turn-off 9.0 V typ; operating range after start-up is 9 V to 20 V. Absolute max continuous VCC is +20 V (+25 V transient)."+ },+ {+ "number": "8",+ "name": "DRV",+ "type": "output",+ "description": "Totem-pole gate Drive Output. \u00b11.5 A peak source/sink capability suitable for directly driving high gate-charge power MOSFETs. Source resistance 9 \u03a9 typ, sink resistance 6.6 \u03a9 typ."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://www.onsemi.com/pdf/datasheet/ncp1654bd200r2-d.pdf",+ "pages": 25,+ "sha256": "0c75ab135913f4c0",+ "source_tier": "mfr"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 8,+ "described": 8,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "metadata": {+ "specs": {+ "Manufacturer": "onsemi",+ "Package": "SOIC-8",+ "Category": "PMIC",+ "Pins": "8"+ }+ },+ "sections": [+ "hero",+ "viewers",+ "readme",+ "breadcrumbs",+ "info"+ ],+ "discovery_triggers": [+ "ncp1654bd200r2g"+ ],+ "discovery_pitch": "NCP1654BD200R2G (onsemi) component page with datasheet-verified CAD.",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }, "dependencies": {}, "hero": { "type": "image",@@ -25,10 +138,5 @@ "docs/ncp1654bd200r2g-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": "public",- "author": {- "name": "Ray",- "email": "[email protected]"- }+ ] }