← Commit history
README.mdadded+49@@ -0,0 +1,49 @@+# NCP1654BD200R2G++**onsemi** · AC-DC Controllers and Regulators · SOIC-8++NCP1654BD200R2G from onsemi, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | GND | power_in | Device ground reference. Return path for VCC supply, gate drive current, and all internal analog/digital circuitry. |+| 2 | Vin | output | Multiplier Voltage output (VM). Provides the voltage used for PFC duty-cycle modulation; input impedance is proportional to an external resistor RM connected here. An external capacitor CM to this pin selects average current mode; without CM, the device operates in peak current mode. |+| 3 | CS | input | Current Sense Input. Sources a current ICS proportional to the boost inductor current IL; used for overcurrent protection (OCP, threshold ~200 μA), overpower limitation (OPL) and PFC duty-cycle modulation. When ICS exceeds ~200 μA the drive output is disabled. |+| 4 | VBO | input | Brown-Out / Input voltage sense. Connect to a resistor divider from the rectified input voltage to ground with a filter capacitor; measures a voltage proportional to the RMS input for brown-out detection (VBOL 0.7 V typ, VBOH 1.3 V typ), overpower limitation and duty-cycle modulation. When VBO < VBOL the driver is held low until VBO > VBOH. |+| 5 | Vcontrol | bidirectional | Control Voltage / Soft-Start pin. Voltage on this pin (typ 0.6-3.6 V) directly controls the input impedance of the regulation loop; connect external type-2 compensation network here to limit Vcontrol bandwidth below ~20 Hz for near-unity power factor. Also implements soft-start; no drive output until Vcontrol > Vcontrol(min). |+| 6 | VFB | input | Feedback / Shutdown input. Receives feedback signal proportional to the PFC output voltage for regulation, overvoltage protection (OVP trips at 105% VREF), and undervoltage protection (UVP). When VFB < 8% VREF the device enters low-consumption shutdown. |+| 7 | VCC | power_in | Positive supply voltage for the IC. Startup threshold (VCC rising) 10.5 V typ, UVLO turn-off 9.0 V typ; operating range after start-up is 9 V to 20 V. Absolute max continuous VCC is +20 V (+25 V transient). |+| 8 | DRV | output | Totem-pole gate Drive Output. ±1.5 A peak source/sink capability suitable for directly driving high gate-charge power MOSFETs. Source resistance 9 Ω typ, sink resistance 6.6 Ω typ. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | onsemi |+| Package | SOIC-8 |+| Category | PMIC |+| Pins | 8 |++## Ordering variants++- `NCP1654BD200R2G`+- `NCP1654BD200R2GBD65R2G`+- `NCP1654BD200R2GBD133R2G`++## CAD (KiCad official)++- Symbol: `NCP1654BD200R2G`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SOIC-8 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [onsemi datasheet](https://www.onsemi.com/pdf/datasheet/ncp1654bd200r2-d.pdf) (25 pp, sha256 `0c75ab135913f4c0`, retrieved 2026-08-17, tier: manufacturer)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ncp1654bd200r2g-datasheet.pdf)
page.jsonadded+34@@ -0,0 +1,34 @@+{+ "slug": "ncp1654bd200r2g",+ "version": "0.1.0",+ "type": "component",+ "description": "onsemi AC-DC Controllers and Regulators, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "pmic",+ "ncp1654bd200r2g"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "ncp1654bd200r2g.kicad_sym",+ "ncp1654bd200r2g.kicad_mod",+ "ncp1654bd200r2g.glb",+ "ncp1654bd200r2g.step",+ "ncp1654bd200r2g.lbr",+ "docs/hero.png",+ "docs/ncp1654bd200r2g-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "visibility": "public",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}