NCP160AFCS330T2G

@@ -0,0 +1,82 @@+# NCP160AFCS330T2G++**onsemi** · Linear Voltage Regulators (LDO) · WLCSP-4(0.6x0.6)++NCP160AFCS330T2G from onsemi, in a WLCSP-4(0.6x0.6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| A1 | IN | power_in | Input voltage supply pin, operating range 1.9 V to 5.5 V. |+| A2 | OUT | power_out | Regulated output voltage; the output should be bypassed with a small 1 µF ceramic capacitor. |+| B1 | EN | input | Chip enable: VEN < 0.4 V disables the regulator, VEN > 1.2 V enables the LDO. |+| B2 | GND | power_in | Common ground connection. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | onsemi |+| Package | WLCSP-4(0.6x0.6) |+| Category | Power Supply Chip |+| Pins | 4 |++## Electrical characteristics++Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).++| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |+|---|---|---|---|---|---|---|---|+| Operating Input Voltage | VIN | 1.9 |  | 5.5 | V |  | 3 |+| Output Voltage Accuracy | VOUT | -2 |  | 2 | % | VIN = VOUT(NOM) + 1 V, 0 mA ≤ IOUT ≤ 250 mA | 3 |+| Dropout Voltage | VDO |  | 80 | 145 | mV | IOUT = 250 mA, VOUT(NOM) = 3.3 V | 3 |+| Output Current Limit | ICL | 250 | 700 |  | mA | VOUT = 90% VOUT(NOM) | 3 |+| Quiescent Current | IQ |  | 18 | 23 | µA | IOUT = 0 mA | 3 |+| Shutdown Current | IDIS |  | 0.01 | 1 | µA | VEN ≤ 0.4 V, VIN = 4.8 V | 3 |+| EN Input Voltage High | VENH | 1.2 |  |  | V |  | 3 |+| EN Input Voltage Low | VENL |  |  | 0.4 | V |  | 3 |+| EN Pull Down Current | IEN |  | 0.2 | 0.5 | µA | VEN = 4.8 V | 3 |+| Line Regulation | LineReg |  | 0.02 |  | %/V | VOUT(NOM) + 1 V ≤ VIN ≤ 5.5 V | 3 |+| Load Regulation | LoadReg |  | 0.001 |  | %/mA | IOUT = 1 mA to 250 mA | 3 |+| Short Circuit Current | ISC |  | 690 |  | mA | VOUT = 0 V | 3 |+| Turn-On Time |  |  | 120 |  | µs | COUT = 1 µF, from assertion of VEN to VOUT = 95% VOUT(NOM) | 3 |+| PSRR 100 Hz | PSRR |  | 91 |  | dB | IOUT = 20 mA, f = 100 Hz | 3 |+| PSRR 1 kHz | PSRR |  | 98 |  | dB | IOUT = 20 mA, f = 1 kHz | 3 |+| PSRR 10 kHz | PSRR |  | 82 |  | dB | IOUT = 20 mA, f = 10 kHz | 3 |+| PSRR 100 kHz | PSRR |  | 48 |  | dB | IOUT = 20 mA, f = 100 kHz | 3 |+| Output Voltage Noise | VN |  | 14 |  | µVRMS | f = 10 Hz to 100 kHz, IOUT = 1 mA | 3 |+| Output Voltage Noise | VN |  | 10 |  | µVRMS | f = 10 Hz to 100 kHz, IOUT = 250 mA | 3 |+| Thermal Shutdown Threshold | TSDH |  | 160 |  | °C | Temperature rising | 3 |+| Thermal Shutdown Threshold | TSDL |  | 140 |  | °C | Temperature falling | 3 |+| Active Output Discharge Resistance | RDIS |  | 280 |  | Ω | VEN < 0.4 V, Version A only | 3 |+| Line Transient | TranLINE |  | -1 |  | mV | VIN = (VOUT(NOM) + 1 V) to (VOUT(NOM) + 1.6 V) in 30 µs, IOUT = 1 mA | 3 |+| Line Transient | TranLINE |  | 1 |  | mV | VIN = (VOUT(NOM) + 1.6 V) to (VOUT(NOM) + 1 V) in 30 µs, IOUT = 1 mA | 3 |+| Load Transient | TranLOAD |  | -40 |  | mV | IOUT = 1 mA to 200 mA in 10 µs | 3 |+| Load Transient | TranLOAD |  | 40 |  | mV | IOUT = 200 mA to 1 mA in 10 µs | 3 |+| Input Voltage | VIN | -0.3 |  | 6 | V |  | 2 |+| Output Voltage | VOUT | -0.3 |  | 6 | V | -0.3 to VIN + 0.3, max. 6 V | 2 |+| Chip Enable Input | VCE | -0.3 |  | 6 | V | -0.3 to VIN + 0.3, max. 6 V | 2 |+| Maximum Junction Temperature | TJ |  |  | 150 | °C |  | 2 |+| Storage Temperature | TSTG | -55 |  | 150 | °C |  | 2 |+| ESD Capability, Human Body Model | ESDHBM |  |  | 2000 | V |  | 2 |+| ESD Capability, Machine Model | ESDMM |  |  | 200 | V |  | 2 |+| Thermal Resistance, Junction-to-Air (CSP4) | RθJA |  | 108 |  | °C/W | JEDEC board JESD51-7 | 2 |+| Operating Junction Temperature | TJ | -40 |  | 125 | °C | Electrical characteristics range | 3 |++## CAD (KiCad official)++- Symbol: `NCP160AFCS330T2G`+- Footprint: `Package_CSP:WLCSP-4_0.64x0.64mm_Layout2x2_P0.35mm`+- 3D model: WLCSP-4(0.6x0.6), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.35 mm nominal DSBGA height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)+- 3D model files: `ncp160afcs330t2g-etched.step` / `ncp160afcs330t2g-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ncp160afcs330t2g.step` / `ncp160afcs330t2g.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [onsemi datasheet](https://www.onsemi.com/pdf/datasheet/ncp160afcs330t2-d.pdf) (21 pp, sha256 `fd2551355d7dbaa8`, retrieved 2026-10-27, tier: manufacturer)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ncp160afcs330t2g-datasheet.pdf)

@@ -0,0 +1,172 @@+{+  "spec": "adom-hero 1.4",+  "mpn": "NCP160AFCS330T2G",+  "kind": "component + footprint reference art",+  "board_use": false,+  "plane_z_mm": -0.02,+  "units": "metre",+  "upAxis": "Z",+  "layers": {+    "pad_outlines": {+      "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+      "rgba": [+        0.0,+        0.902,+        0.863,+        0.5+      ],+      "pads": 4,+      "span_mm": 1.0,+      "dash_mm": 0.12,+      "gap_mm": 0.072,+      "pad_stroke_mm": 0.03+    },+    "silkscreen": {+      "material": "Silkscreen reference lines - 30 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.3+      ],+      "footprint_items": 5,+      "pin1": {+        "source": "footprint silkscreen",+        "pad": "A1"+      }+    },+    "signal_names": {+      "material": "Signal names - 50 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.5+      ],+      "font": "DejaVu Sans Mono",+      "labels": 4,+      "sides": "top + mirrored underside (single-sided)",+      "fallback_to_pad_number": 0+    }+  },+  "align": {+    "ok": true,+    "centre_offset_mm": 0.005,+    "tolerance_mm": 0.25,+    "orientation_flipped": false,+    "contacts_bbox_mm": [+      -0.274,+      0.283,+      -0.275,+      0.275+    ],+    "pads_bbox_mm": [+      -0.28,+      0.28,+      -0.28,+      0.28+    ],+    "seating_z_mm": -0.029+  },+  "sources": {+    "glb": "ncp160afcs330t2g-etched.glb",+    "glb_sha256": "919585ff13c1ce2cad91077b6b472450ac96273c908600fbef8ddc8403c1c2f6",+    "footprint": "ncp160afcs330t2g.kicad_mod",+    "footprint_sha256": "111bf8c4e21c076dca7ddaf63c66116d4f19ae15b6e95cfb1cf7966882c002e8",+    "pins": "page.json component.pins",+    "pins_sha256": "abdaa27ea1dbef7ecd753e3949ab78a24c6d0a69cffb8c0e3f800a455c44f43f"+  },+  "generator": "adom-wiki 1.8.0 (component_hero)",+  "labels": [+    {+      "pad": "A1",+      "text": "IN",+      "x": -0.38,+      "y": -0.175,+      "align": "right",+      "vertical": false,+      "h": 0.175+    },+    {+      "pad": "A2",+      "text": "OUT",+      "x": 0.38,+      "y": -0.175,+      "align": "left",+      "vertical": false,+      "h": 0.175+    },+    {+      "pad": "B1",+      "text": "EN",+      "x": -0.38,+      "y": 0.175,+      "align": "right",+      "vertical": false,+      "h": 0.175+    },+    {+      "pad": "B2",+      "text": "GND",+      "x": 0.38,+      "y": 0.175,+      "align": "left",+      "vertical": false,+      "h": 0.175+    }+  ],+  "pads": [+    {+      "number": "A1",+      "shape": "circle",+      "center_mm": [+        -0.175,+        -0.175+      ],+      "size_mm": [+        0.21,+        0.21+      ],+      "rot": 0.0+    },+    {+      "number": "A2",+      "shape": "circle",+      "center_mm": [+        0.175,+        -0.175+      ],+      "size_mm": [+        0.21,+        0.21+      ],+      "rot": 0.0+    },+    {+      "number": "B1",+      "shape": "circle",+      "center_mm": [+        -0.175,+        0.175+      ],+      "size_mm": [+        0.21,+        0.21+      ],+      "rot": 0.0+    },+    {+      "number": "B2",+      "shape": "circle",+      "center_mm": [+        0.175,+        0.175+      ],+      "size_mm": [+        0.21,+        0.21+      ],+      "rot": 0.0+    }+  ]+}

@@ -0,0 +1,186 @@+(footprint "WLCSP-4_0.64x0.64mm_Layout2x2_P0.35mm"+	(version 20260206)+	(generator "kicad-footprint-generator")+	(layer "F.Cu")+	(descr "WLCSP-4, 0.64x0.64mm, 4 Ball, 2x2 Layout, 0.35mm Pitch, https://www.onsemi.com/pdf/datasheet/ncp163-d.pdf#page=23")+	(tags "CSP 4 0.35")+	(property "Reference" "REF**"+		(at 0 -1.32 0)+		(layer "F.SilkS")+		(effects+			(font+				(size 1 1)+				(thickness 0.15)+			)+		)+	)+	(property "Value" "WLCSP-4_0.64x0.64mm_Layout2x2_P0.35mm"+		(at 0 1.32 0)+		(layer "F.Fab")+		(effects+			(font+				(size 1 1)+				(thickness 0.15)+			)+		)+	)+	(property "KiLib_Generator" "package/grid_array"+		(at 0 0 0)+		(layer "F.SilkS")+		(hide yes)+		(effects+			(font+				(size 1 1)+				(thickness 0.15)+			)+		)+	)+	(attr smd)+	(duplicate_pad_numbers_are_jumpers no)+	(fp_line+		(start -0.54 0.54)+		(end -0.54 -0.325)+		(stroke+			(width 0.12)+			(type solid)+		)+		(layer "F.SilkS")+	)+	(fp_line+		(start -0.325 -0.54)+		(end 0.54 -0.54)+		(stroke+			(width 0.12)+			(type solid)+		)+		(layer "F.SilkS")+	)+	(fp_line+		(start 0.54 -0.54)+		(end 0.54 0.54)+		(stroke+			(width 0.12)+			(type solid)+		)+		(layer "F.SilkS")+	)+	(fp_line+		(start 0.54 0.54)+		(end -0.54 0.54)+		(stroke+			(width 0.12)+			(type solid)+		)+		(layer "F.SilkS")+	)+	(fp_poly+		(pts+			(xy -0.54 -0.54)+			(xy -1.04 -0.54)+			(xy -0.54 -1.04)+		)+		(stroke+			(width 0.12)+			(type solid)+		)+		(fill yes)+		(layer "F.SilkS")+	)+	(fp_line+		(start -0.32 -0.16)+		(end -0.16 -0.32)+		(stroke+			(width 0.1)+			(type solid)+		)+		(layer "F.Fab")+	)+	(fp_line+		(start -0.32 0.32)+		(end -0.32 -0.16)+		(stroke+			(width 0.1)+			(type solid)+		)+		(layer "F.Fab")+	)+	(fp_line+		(start -0.16 -0.32)+		(end 0.32 -0.32)+		(stroke+			(width 0.1)+			(type solid)+		)+		(layer "F.Fab")+	)+	(fp_line+		(start 0.32 -0.32)+		(end 0.32 0.32)+		(stroke+			(width 0.1)+			(type solid)+		)+		(layer "F.Fab")+	)+	(fp_line+		(start 0.32 0.32)+		(end -0.32 0.32)+		(stroke+			(width 0.1)+			(type solid)+		)+		(layer "F.Fab")+	)+	(fp_text user "${REFERENCE}"+		(at 0 0 0)+		(layer "F.Fab")+		(effects+			(font+				(size 0.15 0.15)+				(thickness 0.0225)+			)+		)+	)+	(pad "A1" smd circle+		(at -0.175 -0.175)+		(size 0.21 0.21)+		(property pad_prop_bga)+		(layers "F.Cu" "F.Mask" "F.Paste")+	)+	(pad "A2" smd circle+		(at 0.175 -0.175)+		(size 0.21 0.21)+		(property pad_prop_bga)+		(layers "F.Cu" "F.Mask" "F.Paste")+	)+	(pad "B1" smd circle+		(at -0.175 0.175)+		(size 0.21 0.21)+		(property pad_prop_bga)+		(layers "F.Cu" "F.Mask" "F.Paste")+	)+	(pad "B2" smd circle+		(at 0.175 0.175)+		(size 0.21 0.21)+		(property pad_prop_bga)+		(layers "F.Cu" "F.Mask" "F.Paste")+	)+	(embedded_fonts no)+	(model "${KICAD10_3DMODEL_DIR}/Package_CSP.3dshapes/WLCSP-4_0.64x0.64mm_Layout2x2_P0.35mm.step"+		(offset+			(xyz 0 0 0)+		)+		(scale+			(xyz 1 1 1)+		)+		(rotate+			(xyz 0 0 0)+		)+	)+	(fp_poly+		(pts (xy -0.57 -0.57) (xy 0.57 -0.57) (xy 0.57 0.57) (xy -0.57 0.57))+		(stroke (width 0.05) (type solid))+		(fill no)+		(layer "F.CrtYd")+	)+)

@@ -0,0 +1,114 @@+<?xml version="1.0" encoding="utf-8"?>+<!DOCTYPE eagle SYSTEM "eagle.dtd">+<eagle version="9.6.2">+<drawing>+<settings><setting alwaysvectorfont="no"/></settings>+<grid distance="0.1" unitdist="inch" unit="inch" style="lines" multiple="1" display="no" altdistance="0.01" altunitdist="inch" altunit="inch"/>+<layers>+<layer number="1" name="Top" color="4" fill="1" visible="yes" active="yes"/>+<layer number="16" name="Bottom" color="1" fill="1" visible="yes" active="yes"/>+<layer number="17" name="Pads" color="2" fill="1" visible="yes" active="yes"/>+<layer number="18" name="Vias" color="2" fill="1" visible="yes" active="yes"/>+<layer number="19" name="Unrouted" color="6" fill="1" visible="yes" active="yes"/>+<layer number="20" name="Dimension" color="15" fill="1" visible="yes" active="yes"/>+<layer number="21" name="tPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="22" name="bPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="23" name="tOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="24" name="bOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="25" name="tNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="26" name="bNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="27" name="tValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="28" name="bValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="29" name="tStop" color="7" fill="3" visible="no" active="yes"/>+<layer number="30" name="bStop" color="7" fill="6" visible="no" active="yes"/>+<layer number="31" name="tCream" color="7" fill="4" visible="no" active="yes"/>+<layer number="32" name="bCream" color="7" fill="5" visible="no" active="yes"/>+<layer number="33" name="tFinish" color="6" fill="3" visible="no" active="yes"/>+<layer number="34" name="bFinish" color="6" fill="6" visible="no" active="yes"/>+<layer number="35" name="tGlue" color="7" fill="4" visible="no" active="yes"/>+<layer number="36" name="bGlue" color="7" fill="5" visible="no" active="yes"/>+<layer number="37" name="tTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="38" name="bTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="39" name="tKeepout" color="4" fill="11" visible="no" active="yes"/>+<layer number="40" name="bKeepout" color="1" fill="11" visible="no" active="yes"/>+<layer number="41" name="tRestrict" color="4" fill="10" visible="no" active="yes"/>+<layer number="42" name="bRestrict" color="1" fill="10" visible="no" active="yes"/>+<layer number="43" name="vRestrict" color="2" fill="10" visible="no" active="yes"/>+<layer number="44" name="Drills" color="7" fill="1" visible="no" active="yes"/>+<layer number="45" name="Holes" color="7" fill="1" visible="no" active="yes"/>+<layer number="46" name="Milling" color="3" fill="1" visible="no" active="yes"/>+<layer number="47" name="Measures" color="7" fill="1" visible="no" active="yes"/>+<layer number="48" name="Document" color="7" fill="1" visible="yes" active="yes"/>+<layer number="49" name="Reference" color="7" fill="1" visible="yes" active="yes"/>+<layer number="91" name="Nets" color="2" fill="1" visible="yes" active="yes"/>+<layer number="92" name="Busses" color="1" fill="1" visible="yes" active="yes"/>+<layer number="93" name="Pins" color="2" fill="1" visible="no" active="yes"/>+<layer number="94" name="Symbols" color="4" fill="1" visible="yes" active="yes"/>+<layer number="95" name="Names" color="7" fill="1" visible="yes" active="yes"/>+<layer number="96" name="Values" color="7" fill="1" visible="yes" active="yes"/>+<layer number="97" name="Info" color="7" fill="1" visible="yes" active="yes"/>+<layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/>+</layers>+<library>+<description></description>+<packages>+<package name="WLCSP-4_0.64x0.64mm_Layout2x2_P0.35mm">+  <description>WLCSP-4, 0.64 x 0.64 mm, 0.35 mm pitch. WLCSP-4, 0.64x0.64mm, 4 Ball, 2x2 Layout, 0.35mm Pitch</description>+  <smd name="A1" x="-0.1750" y="0.1750" dx="0.2100" dy="0.2100" layer="1" roundness="100"/>+  <smd name="A2" x="0.1750" y="0.1750" dx="0.2100" dy="0.2100" layer="1" roundness="100"/>+  <smd name="B1" x="-0.1750" y="-0.1750" dx="0.2100" dy="0.2100" layer="1" roundness="100"/>+  <smd name="B2" x="0.1750" y="-0.1750" dx="0.2100" dy="0.2100" layer="1" roundness="100"/>+  <polygon width="0.1200" layer="21">+    <vertex x="-0.5400" y="0.5400"/>+    <vertex x="-1.0400" y="0.5400"/>+    <vertex x="-0.5400" y="1.0400"/>+  </polygon>+  <wire x1="-0.5400" y1="-0.5400" x2="-0.5400" y2="0.3250" width="0.1200" layer="21"/>+  <wire x1="-0.3250" y1="0.5400" x2="0.5400" y2="0.5400" width="0.1200" layer="21"/>+  <wire x1="0.5400" y1="0.5400" x2="0.5400" y2="-0.5400" width="0.1200" layer="21"/>+  <wire x1="0.5400" y1="-0.5400" x2="-0.5400" y2="-0.5400" width="0.1200" layer="21"/>+  <wire x1="-0.3200" y1="0.1600" x2="-0.1600" y2="0.3200" width="0.1000" layer="51"/>+  <wire x1="-0.3200" y1="-0.3200" x2="-0.3200" y2="0.1600" width="0.1000" layer="51"/>+  <wire x1="-0.1600" y1="0.3200" x2="0.3200" y2="0.3200" width="0.1000" layer="51"/>+  <wire x1="0.3200" y1="0.3200" x2="0.3200" y2="-0.3200" width="0.1000" layer="51"/>+  <wire x1="0.3200" y1="-0.3200" x2="-0.3200" y2="-0.3200" width="0.1000" layer="51"/>+  <text x="0" y="1.140" size="1.27" layer="25" align="bottom-center">&gt;NAME</text>+  <text x="0" y="-1.140" size="1.27" layer="27" align="top-center">&gt;VALUE</text>+</package>+</packages>+<symbols>+<symbol name="NCP160AFCS330T2G">+  <wire x1="-12.7" y1="2.54" x2="12.7" y2="2.54" width="0.254" layer="94"/>+  <wire x1="12.7" y1="2.54" x2="12.7" y2="-5.08" width="0.254" layer="94"/>+  <wire x1="12.7" y1="-5.08" x2="-12.7" y2="-5.08" width="0.254" layer="94"/>+  <wire x1="-12.7" y1="-5.08" x2="-12.7" y2="2.54" width="0.254" layer="94"/>+  <text x="0.0000" y="5.0800" size="1.27" layer="95" align="center">&gt;NAME</text>+  <text x="0.0000" y="-7.6200" size="1.27" layer="96" align="center">&gt;VALUE</text>+  <pin name="IN" x="-17.78" y="0" length="middle" direction="pwr"/>+  <pin name="OUT" x="-17.78" y="-2.54" length="middle" direction="out"/>+  <pin name="GND" x="17.78" y="0" length="middle" direction="pwr" rot="R180"/>+  <pin name="EN" x="17.78" y="-2.54" length="middle" direction="in" rot="R180"/>+</symbol>+</symbols>+<devicesets>+<deviceset name="NCP160AFCS330T2G" prefix="U">+  <description></description>+  <gates>+    <gate name="G$1" symbol="NCP160AFCS330T2G" x="0" y="0"/>+  </gates>+  <devices>+    <device name="" package="WLCSP-4_0.64x0.64mm_Layout2x2_P0.35mm">+      <connects>+        <connect gate="G$1" pin="IN" pad="A1"/>+        <connect gate="G$1" pin="OUT" pad="A2"/>+        <connect gate="G$1" pin="GND" pad="B2"/>+        <connect gate="G$1" pin="EN" pad="B1"/>+      </connects>+      <technologies><technology name=""/></technologies>+    </device>+  </devices>+</deviceset>+</devicesets>+</library>+</drawing>+</eagle>\ No newline at end of file

@@ -0,0 +1,818 @@+ISO-10303-21;+HEADER;+FILE_DESCRIPTION(('Open CASCADE Model'),'2;1');+FILE_NAME('Open CASCADE Shape Model','2026-10-27T01:10:49',('Author'),(+    'Open CASCADE'),'Open CASCADE STEP processor 7.9','Open CASCADE 7.9'+  ,'Unknown');+FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }'));+ENDSEC;+DATA;+#1 = APPLICATION_PROTOCOL_DEFINITION('international standard',+  'automotive_design',2000,#2);+#2 = APPLICATION_CONTEXT(+  'core data for automotive mechanical design processes');+#3 = SHAPE_DEFINITION_REPRESENTATION(#4,#10);+#4 = PRODUCT_DEFINITION_SHAPE('','',#5);+#5 = PRODUCT_DEFINITION('design','',#6,#9);+#6 = PRODUCT_DEFINITION_FORMATION('','',#7);+#7 = PRODUCT('NCP160AFCS330T2G','NCP160AFCS330T2G','',(#8));+#8 = PRODUCT_CONTEXT('',#2,'mechanical');+#9 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');+#10 = SHAPE_REPRESENTATION('',(#11,#15,#561,#573,#585,#597),#609);+#11 = AXIS2_PLACEMENT_3D('',#12,#13,#14);+#12 = CARTESIAN_POINT('',(0.,0.,0.));+#13 = DIRECTION('',(0.,0.,1.));+#14 = DIRECTION('',(1.,0.,-0.));+#15 = MANIFOLD_SOLID_BREP('',#16);+#16 = CLOSED_SHELL('',(#17,#137,#218,#299,#348,#397,#429,#478,#527,#554)+  );+#17 = ADVANCED_FACE('',(#18),#32,.F.);+#18 = FACE_BOUND('',#19,.F.);+#19 = EDGE_LOOP('',(#20,#55,#83,#111));+#20 = ORIENTED_EDGE('',*,*,#21,.F.);+#21 = EDGE_CURVE('',#22,#24,#26,.T.);+#22 = VERTEX_POINT('',#23);+#23 = CARTESIAN_POINT('',(-0.32,-0.32,0.17325));+#24 = VERTEX_POINT('',#25);+#25 = CARTESIAN_POINT('',(-0.32,-0.32,0.48125));+#26 = SURFACE_CURVE('',#27,(#31,#43),.PCURVE_S1.);+#27 = LINE('',#28,#29);+#28 = CARTESIAN_POINT('',(-0.32,-0.32,0.17325));+#29 = VECTOR('',#30,1.);+#30 = DIRECTION('',(0.,0.,1.));+#31 = PCURVE('',#32,#37);+#32 = PLANE('',#33);+#33 = AXIS2_PLACEMENT_3D('',#34,#35,#36);+#34 = CARTESIAN_POINT('',(-0.32,-0.32,0.17325));+#35 = DIRECTION('',(1.,0.,0.));+#36 = DIRECTION('',(0.,0.,1.));+#37 = DEFINITIONAL_REPRESENTATION('',(#38),#42);+#38 = LINE('',#39,#40);+#39 = CARTESIAN_POINT('',(0.,0.));+#40 = VECTOR('',#41,1.);+#41 = DIRECTION('',(1.,0.));+#42 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#43 = PCURVE('',#44,#49);+#44 = PLANE('',#45);+#45 = AXIS2_PLACEMENT_3D('',#46,#47,#48);+#46 = CARTESIAN_POINT('',(-0.32,-0.32,0.17325));+#47 = DIRECTION('',(0.,1.,0.));+#48 = DIRECTION('',(0.,0.,1.));+#49 = DEFINITIONAL_REPRESENTATION('',(#50),#54);+#50 = LINE('',#51,#52);+#51 = CARTESIAN_POINT('',(0.,0.));+#52 = VECTOR('',#53,1.);+#53 = DIRECTION('',(1.,0.));+#54 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#55 = ORIENTED_EDGE('',*,*,#56,.T.);+#56 = EDGE_CURVE('',#22,#57,#59,.T.);+#57 = VERTEX_POINT('',#58);+#58 = CARTESIAN_POINT('',(-0.32,0.32,0.17325));+#59 = SURFACE_CURVE('',#60,(#64,#71),.PCURVE_S1.);+#60 = LINE('',#61,#62);+#61 = CARTESIAN_POINT('',(-0.32,-0.32,0.17325));+#62 = VECTOR('',#63,1.);+#63 = DIRECTION('',(0.,1.,0.));+#64 = PCURVE('',#32,#65);+#65 = DEFINITIONAL_REPRESENTATION('',(#66),#70);+#66 = LINE('',#67,#68);+#67 = CARTESIAN_POINT('',(0.,0.));+#68 = VECTOR('',#69,1.);+#69 = DIRECTION('',(0.,-1.));+#70 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#71 = PCURVE('',#72,#77);+#72 = PLANE('',#73);+#73 = AXIS2_PLACEMENT_3D('',#74,#75,#76);+#74 = CARTESIAN_POINT('',(-0.32,-0.32,0.17325));+#75 = DIRECTION('',(0.,0.,1.));+#76 = DIRECTION('',(1.,0.,0.));+#77 = DEFINITIONAL_REPRESENTATION('',(#78),#82);+#78 = LINE('',#79,#80);+#79 = CARTESIAN_POINT('',(0.,0.));+#80 = VECTOR('',#81,1.);+#81 = DIRECTION('',(0.,1.));+#82 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#83 = ORIENTED_EDGE('',*,*,#84,.T.);+#84 = EDGE_CURVE('',#57,#85,#87,.T.);+#85 = VERTEX_POINT('',#86);+#86 = CARTESIAN_POINT('',(-0.32,0.32,0.48125));+#87 = SURFACE_CURVE('',#88,(#92,#99),.PCURVE_S1.);+#88 = LINE('',#89,#90);+#89 = CARTESIAN_POINT('',(-0.32,0.32,0.17325));+#90 = VECTOR('',#91,1.);+#91 = DIRECTION('',(0.,0.,1.));+#92 = PCURVE('',#32,#93);+#93 = DEFINITIONAL_REPRESENTATION('',(#94),#98);+#94 = LINE('',#95,#96);+#95 = CARTESIAN_POINT('',(0.,-0.64));+#96 = VECTOR('',#97,1.);+#97 = DIRECTION('',(1.,0.));+#98 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#99 = PCURVE('',#100,#105);+#100 = PLANE('',#101);+#101 = AXIS2_PLACEMENT_3D('',#102,#103,#104);+#102 = CARTESIAN_POINT('',(-0.32,0.32,0.17325));+#103 = DIRECTION('',(0.,1.,0.));+#104 = DIRECTION('',(0.,0.,1.));+#105 = DEFINITIONAL_REPRESENTATION('',(#106),#110);+#106 = LINE('',#107,#108);+#107 = CARTESIAN_POINT('',(0.,0.));+#108 = VECTOR('',#109,1.);+#109 = DIRECTION('',(1.,0.));+#110 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#111 = ORIENTED_EDGE('',*,*,#112,.F.);+#112 = EDGE_CURVE('',#24,#85,#113,.T.);+#113 = SURFACE_CURVE('',#114,(#118,#125),.PCURVE_S1.);+#114 = LINE('',#115,#116);+#115 = CARTESIAN_POINT('',(-0.32,-0.32,0.48125));+#116 = VECTOR('',#117,1.);+#117 = DIRECTION('',(0.,1.,0.));+#118 = PCURVE('',#32,#119);+#119 = DEFINITIONAL_REPRESENTATION('',(#120),#124);+#120 = LINE('',#121,#122);+#121 = CARTESIAN_POINT('',(0.308,0.));+#122 = VECTOR('',#123,1.);+#123 = DIRECTION('',(0.,-1.));+#124 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#125 = PCURVE('',#126,#131);+#126 = PLANE('',#127);+#127 = AXIS2_PLACEMENT_3D('',#128,#129,#130);+#128 = CARTESIAN_POINT('',(-0.299,-0.32,0.50225));+#129 = DIRECTION('',(0.707106781187,0.,-0.707106781187));+#130 = DIRECTION('',(0.,1.,0.));+#131 = DEFINITIONAL_REPRESENTATION('',(#132),#136);+#132 = LINE('',#133,#134);+#133 = CARTESIAN_POINT('',(0.,-2.969848480983E-02));+#134 = VECTOR('',#135,1.);+#135 = DIRECTION('',(1.,0.));+#136 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#137 = ADVANCED_FACE('',(#138),#44,.F.);+#138 = FACE_BOUND('',#139,.F.);+#139 = EDGE_LOOP('',(#140,#170,#191,#192));+#140 = ORIENTED_EDGE('',*,*,#141,.F.);+#141 = EDGE_CURVE('',#142,#144,#146,.T.);+#142 = VERTEX_POINT('',#143);+#143 = CARTESIAN_POINT('',(0.32,-0.32,0.17325));+#144 = VERTEX_POINT('',#145);+#145 = CARTESIAN_POINT('',(0.32,-0.32,0.48125));+#146 = SURFACE_CURVE('',#147,(#151,#158),.PCURVE_S1.);+#147 = LINE('',#148,#149);+#148 = CARTESIAN_POINT('',(0.32,-0.32,0.17325));+#149 = VECTOR('',#150,1.);+#150 = DIRECTION('',(0.,0.,1.));+#151 = PCURVE('',#44,#152);+#152 = DEFINITIONAL_REPRESENTATION('',(#153),#157);+#153 = LINE('',#154,#155);+#154 = CARTESIAN_POINT('',(0.,0.64));+#155 = VECTOR('',#156,1.);+#156 = DIRECTION('',(1.,0.));+#157 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#158 = PCURVE('',#159,#164);+#159 = PLANE('',#160);+#160 = AXIS2_PLACEMENT_3D('',#161,#162,#163);+#161 = CARTESIAN_POINT('',(0.32,-0.32,0.17325));+#162 = DIRECTION('',(1.,0.,0.));+#163 = DIRECTION('',(0.,0.,1.));+#164 = DEFINITIONAL_REPRESENTATION('',(#165),#169);+#165 = LINE('',#166,#167);+#166 = CARTESIAN_POINT('',(0.,0.));+#167 = VECTOR('',#168,1.);+#168 = DIRECTION('',(1.,0.));+#169 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#170 = ORIENTED_EDGE('',*,*,#171,.F.);+#171 = EDGE_CURVE('',#22,#142,#172,.T.);+#172 = SURFACE_CURVE('',#173,(#177,#184),.PCURVE_S1.);+#173 = LINE('',#174,#175);+#174 = CARTESIAN_POINT('',(-0.32,-0.32,0.17325));+#175 = VECTOR('',#176,1.);+#176 = DIRECTION('',(1.,0.,0.));+#177 = PCURVE('',#44,#178);+#178 = DEFINITIONAL_REPRESENTATION('',(#179),#183);+#179 = LINE('',#180,#181);+#180 = CARTESIAN_POINT('',(0.,0.));+#181 = VECTOR('',#182,1.);+#182 = DIRECTION('',(0.,1.));+#183 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#184 = PCURVE('',#72,#185);+#185 = DEFINITIONAL_REPRESENTATION('',(#186),#190);+#186 = LINE('',#187,#188);+#187 = CARTESIAN_POINT('',(0.,0.));+#188 = VECTOR('',#189,1.);+#189 = DIRECTION('',(1.,0.));+#190 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#191 = ORIENTED_EDGE('',*,*,#21,.T.);+#192 = ORIENTED_EDGE('',*,*,#193,.T.);+#193 = EDGE_CURVE('',#24,#144,#194,.T.);+#194 = SURFACE_CURVE('',#195,(#199,#206),.PCURVE_S1.);+#195 = LINE('',#196,#197);+#196 = CARTESIAN_POINT('',(-0.32,-0.32,0.48125));+#197 = VECTOR('',#198,1.);+#198 = DIRECTION('',(1.,0.,0.));+#199 = PCURVE('',#44,#200);+#200 = DEFINITIONAL_REPRESENTATION('',(#201),#205);+#201 = LINE('',#202,#203);+#202 = CARTESIAN_POINT('',(0.308,0.));+#203 = VECTOR('',#204,1.);+#204 = DIRECTION('',(0.,1.));+#205 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#206 = PCURVE('',#207,#212);+#207 = PLANE('',#208);+#208 = AXIS2_PLACEMENT_3D('',#209,#210,#211);+#209 = CARTESIAN_POINT('',(-0.32,-0.299,0.50225));+#210 = DIRECTION('',(0.,0.707106781187,-0.707106781187));+#211 = DIRECTION('',(-1.,0.,0.));+#212 = DEFINITIONAL_REPRESENTATION('',(#213),#217);+#213 = LINE('',#214,#215);+#214 = CARTESIAN_POINT('',(0.,-2.969848480983E-02));+#215 = VECTOR('',#216,1.);+#216 = DIRECTION('',(-1.,0.));+#217 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#218 = ADVANCED_FACE('',(#219),#126,.F.);+#219 = FACE_BOUND('',#220,.F.);+#220 = EDGE_LOOP('',(#221,#244,#245,#273));+#221 = ORIENTED_EDGE('',*,*,#222,.F.);+#222 = EDGE_CURVE('',#24,#223,#225,.T.);+#223 = VERTEX_POINT('',#224);+#224 = CARTESIAN_POINT('',(-0.278,-0.278,0.52325));+#225 = SURFACE_CURVE('',#226,(#230,#237),.PCURVE_S1.);+#226 = LINE('',#227,#228);+#227 = CARTESIAN_POINT('',(-0.306,-0.306,0.49525));+#228 = VECTOR('',#229,1.);+#229 = DIRECTION('',(0.57735026919,0.57735026919,0.57735026919));+#230 = PCURVE('',#126,#231);+#231 = DEFINITIONAL_REPRESENTATION('',(#232),#236);+#232 = LINE('',#233,#234);+#233 = CARTESIAN_POINT('',(1.4E-02,-9.899494936612E-03));+#234 = VECTOR('',#235,1.);+#235 = DIRECTION('',(0.57735026919,0.816496580928));+#236 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#237 = PCURVE('',#207,#238);+#238 = DEFINITIONAL_REPRESENTATION('',(#239),#243);+#239 = LINE('',#240,#241);+#240 = CARTESIAN_POINT('',(-1.4E-02,-9.899494936612E-03));+#241 = VECTOR('',#242,1.);+#242 = DIRECTION('',(-0.57735026919,0.816496580928));+#243 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#244 = ORIENTED_EDGE('',*,*,#112,.T.);+#245 = ORIENTED_EDGE('',*,*,#246,.T.);+#246 = EDGE_CURVE('',#85,#247,#249,.T.);+#247 = VERTEX_POINT('',#248);+#248 = CARTESIAN_POINT('',(-0.278,0.278,0.52325));+#249 = SURFACE_CURVE('',#250,(#254,#261),.PCURVE_S1.);+#250 = LINE('',#251,#252);+#251 = CARTESIAN_POINT('',(-0.199333333333,0.199333333333,0.601916666667+    ));+#252 = VECTOR('',#253,1.);+#253 = DIRECTION('',(0.57735026919,-0.57735026919,0.57735026919));+#254 = PCURVE('',#126,#255);+#255 = DEFINITIONAL_REPRESENTATION('',(#256),#260);+#256 = LINE('',#257,#258);+#257 = CARTESIAN_POINT('',(0.519333333333,0.140949951717));+#258 = VECTOR('',#259,1.);+#259 = DIRECTION('',(-0.57735026919,0.816496580928));+#260 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#261 = PCURVE('',#262,#267);+#262 = PLANE('',#263);+#263 = AXIS2_PLACEMENT_3D('',#264,#265,#266);+#264 = CARTESIAN_POINT('',(-0.32,0.299,0.50225));+#265 = DIRECTION('',(0.,0.707106781187,0.707106781187));+#266 = DIRECTION('',(-1.,0.,0.));+#267 = DEFINITIONAL_REPRESENTATION('',(#268),#272);+#268 = LINE('',#269,#270);+#269 = CARTESIAN_POINT('',(-0.120666666667,0.140949951717));+#270 = VECTOR('',#271,1.);+#271 = DIRECTION('',(-0.57735026919,0.816496580928));+#272 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#273 = ORIENTED_EDGE('',*,*,#274,.F.);+#274 = EDGE_CURVE('',#223,#247,#275,.T.);+#275 = SURFACE_CURVE('',#276,(#280,#287),.PCURVE_S1.);+#276 = LINE('',#277,#278);+#277 = CARTESIAN_POINT('',(-0.278,-0.32,0.52325));+#278 = VECTOR('',#279,1.);+#279 = DIRECTION('',(0.,1.,0.));+#280 = PCURVE('',#126,#281);+#281 = DEFINITIONAL_REPRESENTATION('',(#282),#286);+#282 = LINE('',#283,#284);+#283 = CARTESIAN_POINT('',(0.,2.969848480984E-02));+#284 = VECTOR('',#285,1.);+#285 = DIRECTION('',(1.,0.));+#286 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#287 = PCURVE('',#288,#293);+#288 = PLANE('',#289);+#289 = AXIS2_PLACEMENT_3D('',#290,#291,#292);+#290 = CARTESIAN_POINT('',(-0.32,-0.32,0.52325));+#291 = DIRECTION('',(0.,0.,1.));+#292 = DIRECTION('',(1.,0.,0.));+#293 = DEFINITIONAL_REPRESENTATION('',(#294),#298);+#294 = LINE('',#295,#296);+#295 = CARTESIAN_POINT('',(4.2E-02,0.));+#296 = VECTOR('',#297,1.);+#297 = DIRECTION('',(0.,1.));+#298 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#299 = ADVANCED_FACE('',(#300),#72,.F.);+#300 = FACE_BOUND('',#301,.F.);+#301 = EDGE_LOOP('',(#302,#303,#304,#327));+#302 = ORIENTED_EDGE('',*,*,#56,.F.);+#303 = ORIENTED_EDGE('',*,*,#171,.T.);+#304 = ORIENTED_EDGE('',*,*,#305,.T.);+#305 = EDGE_CURVE('',#142,#306,#308,.T.);+#306 = VERTEX_POINT('',#307);+#307 = CARTESIAN_POINT('',(0.32,0.32,0.17325));+#308 = SURFACE_CURVE('',#309,(#313,#320),.PCURVE_S1.);+#309 = LINE('',#310,#311);+#310 = CARTESIAN_POINT('',(0.32,-0.32,0.17325));+#311 = VECTOR('',#312,1.);+#312 = DIRECTION('',(0.,1.,0.));+#313 = PCURVE('',#72,#314);+#314 = DEFINITIONAL_REPRESENTATION('',(#315),#319);+#315 = LINE('',#316,#317);+#316 = CARTESIAN_POINT('',(0.64,0.));+#317 = VECTOR('',#318,1.);+#318 = DIRECTION('',(0.,1.));+#319 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#320 = PCURVE('',#159,#321);+#321 = DEFINITIONAL_REPRESENTATION('',(#322),#326);+#322 = LINE('',#323,#324);+#323 = CARTESIAN_POINT('',(0.,0.));+#324 = VECTOR('',#325,1.);+#325 = DIRECTION('',(0.,-1.));+#326 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#327 = ORIENTED_EDGE('',*,*,#328,.F.);+#328 = EDGE_CURVE('',#57,#306,#329,.T.);+#329 = SURFACE_CURVE('',#330,(#334,#341),.PCURVE_S1.);+#330 = LINE('',#331,#332);+#331 = CARTESIAN_POINT('',(-0.32,0.32,0.17325));+#332 = VECTOR('',#333,1.);+#333 = DIRECTION('',(1.,0.,0.));+#334 = PCURVE('',#72,#335);+#335 = DEFINITIONAL_REPRESENTATION('',(#336),#340);+#336 = LINE('',#337,#338);+#337 = CARTESIAN_POINT('',(0.,0.64));+#338 = VECTOR('',#339,1.);+#339 = DIRECTION('',(1.,0.));+#340 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#341 = PCURVE('',#100,#342);+#342 = DEFINITIONAL_REPRESENTATION('',(#343),#347);+#343 = LINE('',#344,#345);+#344 = CARTESIAN_POINT('',(0.,0.));+#345 = VECTOR('',#346,1.);+#346 = DIRECTION('',(0.,1.));+#347 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#348 = ADVANCED_FACE('',(#349),#100,.T.);+#349 = FACE_BOUND('',#350,.T.);+#350 = EDGE_LOOP('',(#351,#374,#375,#376));+#351 = ORIENTED_EDGE('',*,*,#352,.F.);+#352 = EDGE_CURVE('',#306,#353,#355,.T.);+#353 = VERTEX_POINT('',#354);+#354 = CARTESIAN_POINT('',(0.32,0.32,0.48125));+#355 = SURFACE_CURVE('',#356,(#360,#367),.PCURVE_S1.);+#356 = LINE('',#357,#358);+#357 = CARTESIAN_POINT('',(0.32,0.32,0.17325));+#358 = VECTOR('',#359,1.);+#359 = DIRECTION('',(0.,0.,1.));+#360 = PCURVE('',#100,#361);+#361 = DEFINITIONAL_REPRESENTATION('',(#362),#366);+#362 = LINE('',#363,#364);+#363 = CARTESIAN_POINT('',(0.,0.64));+#364 = VECTOR('',#365,1.);+#365 = DIRECTION('',(1.,0.));+#366 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#367 = PCURVE('',#159,#368);+#368 = DEFINITIONAL_REPRESENTATION('',(#369),#373);+#369 = LINE('',#370,#371);+#370 = CARTESIAN_POINT('',(0.,-0.64));+#371 = VECTOR('',#372,1.);+#372 = DIRECTION('',(1.,0.));+#373 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#374 = ORIENTED_EDGE('',*,*,#328,.F.);+#375 = ORIENTED_EDGE('',*,*,#84,.T.);+#376 = ORIENTED_EDGE('',*,*,#377,.T.);+#377 = EDGE_CURVE('',#85,#353,#378,.T.);+#378 = SURFACE_CURVE('',#379,(#383,#390),.PCURVE_S1.);+#379 = LINE('',#380,#381);+#380 = CARTESIAN_POINT('',(-0.32,0.32,0.48125));+#381 = VECTOR('',#382,1.);+#382 = DIRECTION('',(1.,0.,0.));+#383 = PCURVE('',#100,#384);+#384 = DEFINITIONAL_REPRESENTATION('',(#385),#389);+#385 = LINE('',#386,#387);+#386 = CARTESIAN_POINT('',(0.308,0.));+#387 = VECTOR('',#388,1.);+#388 = DIRECTION('',(0.,1.));+#389 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#390 = PCURVE('',#262,#391);+#391 = DEFINITIONAL_REPRESENTATION('',(#392),#396);+#392 = LINE('',#393,#394);+#393 = CARTESIAN_POINT('',(0.,-2.969848480983E-02));+#394 = VECTOR('',#395,1.);+#395 = DIRECTION('',(-1.,0.));+#396 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#397 = ADVANCED_FACE('',(#398),#159,.T.);+#398 = FACE_BOUND('',#399,.T.);+#399 = EDGE_LOOP('',(#400,#401,#402,#403));+#400 = ORIENTED_EDGE('',*,*,#141,.F.);+#401 = ORIENTED_EDGE('',*,*,#305,.T.);+#402 = ORIENTED_EDGE('',*,*,#352,.T.);+#403 = ORIENTED_EDGE('',*,*,#404,.F.);+#404 = EDGE_CURVE('',#144,#353,#405,.T.);+#405 = SURFACE_CURVE('',#406,(#410,#417),.PCURVE_S1.);+#406 = LINE('',#407,#408);+#407 = CARTESIAN_POINT('',(0.32,-0.32,0.48125));+#408 = VECTOR('',#409,1.);+#409 = DIRECTION('',(0.,1.,0.));+#410 = PCURVE('',#159,#411);+#411 = DEFINITIONAL_REPRESENTATION('',(#412),#416);+#412 = LINE('',#413,#414);+#413 = CARTESIAN_POINT('',(0.308,0.));+#414 = VECTOR('',#415,1.);+#415 = DIRECTION('',(0.,-1.));+#416 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#417 = PCURVE('',#418,#423);+#418 = PLANE('',#419);+#419 = AXIS2_PLACEMENT_3D('',#420,#421,#422);+#420 = CARTESIAN_POINT('',(0.299,-0.32,0.50225));+#421 = DIRECTION('',(0.707106781187,0.,0.707106781187));+#422 = DIRECTION('',(0.,1.,0.));+#423 = DEFINITIONAL_REPRESENTATION('',(#424),#428);+#424 = LINE('',#425,#426);+#425 = CARTESIAN_POINT('',(0.,-2.969848480983E-02));+#426 = VECTOR('',#427,1.);+#427 = DIRECTION('',(1.,0.));+#428 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#429 = ADVANCED_FACE('',(#430),#207,.F.);+#430 = FACE_BOUND('',#431,.T.);+#431 = EDGE_LOOP('',(#432,#433,#434,#457));+#432 = ORIENTED_EDGE('',*,*,#222,.F.);+#433 = ORIENTED_EDGE('',*,*,#193,.T.);+#434 = ORIENTED_EDGE('',*,*,#435,.T.);+#435 = EDGE_CURVE('',#144,#436,#438,.T.);+#436 = VERTEX_POINT('',#437);+#437 = CARTESIAN_POINT('',(0.278,-0.278,0.52325));+#438 = SURFACE_CURVE('',#439,(#443,#450),.PCURVE_S1.);+#439 = LINE('',#440,#441);+#440 = CARTESIAN_POINT('',(0.199333333333,-0.199333333333,0.601916666667+    ));+#441 = VECTOR('',#442,1.);+#442 = DIRECTION('',(-0.57735026919,0.57735026919,0.57735026919));+#443 = PCURVE('',#207,#444);+#444 = DEFINITIONAL_REPRESENTATION('',(#445),#449);+#445 = LINE('',#446,#447);+#446 = CARTESIAN_POINT('',(-0.519333333333,0.140949951717));+#447 = VECTOR('',#448,1.);+#448 = DIRECTION('',(0.57735026919,0.816496580928));+#449 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#450 = PCURVE('',#418,#451);+#451 = DEFINITIONAL_REPRESENTATION('',(#452),#456);+#452 = LINE('',#453,#454);+#453 = CARTESIAN_POINT('',(0.120666666667,0.140949951717));+#454 = VECTOR('',#455,1.);+#455 = DIRECTION('',(0.57735026919,0.816496580928));+#456 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#457 = ORIENTED_EDGE('',*,*,#458,.F.);+#458 = EDGE_CURVE('',#223,#436,#459,.T.);+#459 = SURFACE_CURVE('',#460,(#464,#471),.PCURVE_S1.);+#460 = LINE('',#461,#462);+#461 = CARTESIAN_POINT('',(-0.32,-0.278,0.52325));+#462 = VECTOR('',#463,1.);+#463 = DIRECTION('',(1.,0.,0.));+#464 = PCURVE('',#207,#465);+#465 = DEFINITIONAL_REPRESENTATION('',(#466),#470);+#466 = LINE('',#467,#468);+#467 = CARTESIAN_POINT('',(0.,2.969848480984E-02));+#468 = VECTOR('',#469,1.);+#469 = DIRECTION('',(-1.,0.));+#470 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#471 = PCURVE('',#288,#472);+#472 = DEFINITIONAL_REPRESENTATION('',(#473),#477);+#473 = LINE('',#474,#475);+#474 = CARTESIAN_POINT('',(0.,4.2E-02));+#475 = VECTOR('',#476,1.);+#476 = DIRECTION('',(1.,0.));+#477 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#478 = ADVANCED_FACE('',(#479),#288,.T.);+#479 = FACE_BOUND('',#480,.T.);+#480 = EDGE_LOOP('',(#481,#482,#483,#506));+#481 = ORIENTED_EDGE('',*,*,#274,.F.);+#482 = ORIENTED_EDGE('',*,*,#458,.T.);+#483 = ORIENTED_EDGE('',*,*,#484,.T.);+#484 = EDGE_CURVE('',#436,#485,#487,.T.);+#485 = VERTEX_POINT('',#486);+#486 = CARTESIAN_POINT('',(0.278,0.278,0.52325));+#487 = SURFACE_CURVE('',#488,(#492,#499),.PCURVE_S1.);+#488 = LINE('',#489,#490);+#489 = CARTESIAN_POINT('',(0.278,-0.32,0.52325));+#490 = VECTOR('',#491,1.);+#491 = DIRECTION('',(0.,1.,0.));+#492 = PCURVE('',#288,#493);+#493 = DEFINITIONAL_REPRESENTATION('',(#494),#498);+#494 = LINE('',#495,#496);+#495 = CARTESIAN_POINT('',(0.598,0.));+#496 = VECTOR('',#497,1.);+#497 = DIRECTION('',(0.,1.));+#498 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#499 = PCURVE('',#418,#500);+#500 = DEFINITIONAL_REPRESENTATION('',(#501),#505);+#501 = LINE('',#502,#503);+#502 = CARTESIAN_POINT('',(0.,2.969848480984E-02));+#503 = VECTOR('',#504,1.);+#504 = DIRECTION('',(1.,0.));+#505 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#506 = ORIENTED_EDGE('',*,*,#507,.F.);+#507 = EDGE_CURVE('',#247,#485,#508,.T.);+#508 = SURFACE_CURVE('',#509,(#513,#520),.PCURVE_S1.);+#509 = LINE('',#510,#511);+#510 = CARTESIAN_POINT('',(-0.32,0.278,0.52325));+#511 = VECTOR('',#512,1.);+#512 = DIRECTION('',(1.,0.,0.));+#513 = PCURVE('',#288,#514);+#514 = DEFINITIONAL_REPRESENTATION('',(#515),#519);+#515 = LINE('',#516,#517);+#516 = CARTESIAN_POINT('',(0.,0.598));+#517 = VECTOR('',#518,1.);+#518 = DIRECTION('',(1.,0.));+#519 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#520 = PCURVE('',#262,#521);+#521 = DEFINITIONAL_REPRESENTATION('',(#522),#526);+#522 = LINE('',#523,#524);+#523 = CARTESIAN_POINT('',(0.,2.969848480984E-02));+#524 = VECTOR('',#525,1.);+#525 = DIRECTION('',(-1.,0.));+#526 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#527 = ADVANCED_FACE('',(#528),#262,.T.);+#528 = FACE_BOUND('',#529,.F.);+#529 = EDGE_LOOP('',(#530,#531,#532,#553));+#530 = ORIENTED_EDGE('',*,*,#246,.F.);+#531 = ORIENTED_EDGE('',*,*,#377,.T.);+#532 = ORIENTED_EDGE('',*,*,#533,.T.);+#533 = EDGE_CURVE('',#353,#485,#534,.T.);+#534 = SURFACE_CURVE('',#535,(#539,#546),.PCURVE_S1.);+#535 = LINE('',#536,#537);+#536 = CARTESIAN_POINT('',(9.266666666667E-02,9.266666666667E-02,+    0.708583333333));+#537 = VECTOR('',#538,1.);+#538 = DIRECTION('',(-0.57735026919,-0.57735026919,0.57735026919));+#539 = PCURVE('',#262,#540);+#540 = DEFINITIONAL_REPRESENTATION('',(#541),#545);+#541 = LINE('',#542,#543);+#542 = CARTESIAN_POINT('',(-0.412666666667,0.291799398369));+#543 = VECTOR('',#544,1.);+#544 = DIRECTION('',(0.57735026919,0.816496580928));+#545 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#546 = PCURVE('',#418,#547);+#547 = DEFINITIONAL_REPRESENTATION('',(#548),#552);+#548 = LINE('',#549,#550);+#549 = CARTESIAN_POINT('',(0.412666666667,0.291799398369));+#550 = VECTOR('',#551,1.);+#551 = DIRECTION('',(-0.57735026919,0.816496580928));+#552 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#553 = ORIENTED_EDGE('',*,*,#507,.F.);+#554 = ADVANCED_FACE('',(#555),#418,.T.);+#555 = FACE_BOUND('',#556,.T.);+#556 = EDGE_LOOP('',(#557,#558,#559,#560));+#557 = ORIENTED_EDGE('',*,*,#435,.F.);+#558 = ORIENTED_EDGE('',*,*,#404,.T.);+#559 = ORIENTED_EDGE('',*,*,#533,.T.);+#560 = ORIENTED_EDGE('',*,*,#484,.F.);+#561 = MANIFOLD_SOLID_BREP('',#562);+#562 = CLOSED_SHELL('',(#563));+#563 = ADVANCED_FACE('',(#564),#568,.T.);+#564 = FACE_BOUND('',#565,.T.);+#565 = VERTEX_LOOP('',#566);+#566 = VERTEX_POINT('',#567);+#567 = CARTESIAN_POINT('',(-0.175,0.175,-2.8875E-02));+#568 = SPHERICAL_SURFACE('',#569,0.1155);+#569 = AXIS2_PLACEMENT_3D('',#570,#571,#572);+#570 = CARTESIAN_POINT('',(-0.175,0.175,8.6625E-02));+#571 = DIRECTION('',(0.,0.,1.));+#572 = DIRECTION('',(1.,0.,0.));+#573 = MANIFOLD_SOLID_BREP('',#574);+#574 = CLOSED_SHELL('',(#575));+#575 = ADVANCED_FACE('',(#576),#580,.T.);+#576 = FACE_BOUND('',#577,.T.);+#577 = VERTEX_LOOP('',#578);+#578 = VERTEX_POINT('',#579);+#579 = CARTESIAN_POINT('',(0.175,0.175,-2.8875E-02));+#580 = SPHERICAL_SURFACE('',#581,0.1155);+#581 = AXIS2_PLACEMENT_3D('',#582,#583,#584);+#582 = CARTESIAN_POINT('',(0.175,0.175,8.6625E-02));+#583 = DIRECTION('',(0.,0.,1.));+#584 = DIRECTION('',(1.,0.,0.));+#585 = MANIFOLD_SOLID_BREP('',#586);+#586 = CLOSED_SHELL('',(#587));+#587 = ADVANCED_FACE('',(#588),#592,.T.);+#588 = FACE_BOUND('',#589,.T.);+#589 = VERTEX_LOOP('',#590);+#590 = VERTEX_POINT('',#591);+#591 = CARTESIAN_POINT('',(-0.175,-0.175,-2.8875E-02));+#592 = SPHERICAL_SURFACE('',#593,0.1155);+#593 = AXIS2_PLACEMENT_3D('',#594,#595,#596);+#594 = CARTESIAN_POINT('',(-0.175,-0.175,8.6625E-02));+#595 = DIRECTION('',(0.,0.,1.));+#596 = DIRECTION('',(1.,0.,0.));+#597 = MANIFOLD_SOLID_BREP('',#598);+#598 = CLOSED_SHELL('',(#599));+#599 = ADVANCED_FACE('',(#600),#604,.T.);+#600 = FACE_BOUND('',#601,.T.);+#601 = VERTEX_LOOP('',#602);+#602 = VERTEX_POINT('',#603);+#603 = CARTESIAN_POINT('',(0.175,-0.175,-2.8875E-02));+#604 = SPHERICAL_SURFACE('',#605,0.1155);+#605 = AXIS2_PLACEMENT_3D('',#606,#607,#608);+#606 = CARTESIAN_POINT('',(0.175,-0.175,8.6625E-02));+#607 = DIRECTION('',(0.,0.,1.));+#608 = DIRECTION('',(1.,0.,0.));+#609 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#613)) GLOBAL_UNIT_ASSIGNED_CONTEXT+((#610,#611,#612)) REPRESENTATION_CONTEXT('Context #1',+  '3D Context with UNIT and UNCERTAINTY') );+#610 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );+#611 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );+#612 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );+#613 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#610,+  'distance_accuracy_value','confusion accuracy');+#614 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#7));+#615 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(#616,+    #624,#631,#638,#645,#652,#659,#666,#673,#680,#687,#695,#702,#709),+  #609);+#616 = STYLED_ITEM('color',(#617),#17);+#617 = PRESENTATION_STYLE_ASSIGNMENT((#618));+#618 = SURFACE_STYLE_USAGE(.BOTH.,#619);+#619 = SURFACE_SIDE_STYLE('',(#620));+#620 = SURFACE_STYLE_FILL_AREA(#621);+#621 = FILL_AREA_STYLE('',(#622));+#622 = FILL_AREA_STYLE_COLOUR('',#623);+#623 = COLOUR_RGB('',0.120000001395,0.120000001395,0.130000001093);+#624 = STYLED_ITEM('color',(#625),#137);+#625 = PRESENTATION_STYLE_ASSIGNMENT((#626));+#626 = SURFACE_STYLE_USAGE(.BOTH.,#627);+#627 = SURFACE_SIDE_STYLE('',(#628));+#628 = SURFACE_STYLE_FILL_AREA(#629);+#629 = FILL_AREA_STYLE('',(#630));+#630 = FILL_AREA_STYLE_COLOUR('',#623);+#631 = STYLED_ITEM('color',(#632),#218);+#632 = PRESENTATION_STYLE_ASSIGNMENT((#633));+#633 = SURFACE_STYLE_USAGE(.BOTH.,#634);+#634 = SURFACE_SIDE_STYLE('',(#635));+#635 = SURFACE_STYLE_FILL_AREA(#636);+#636 = FILL_AREA_STYLE('',(#637));+#637 = FILL_AREA_STYLE_COLOUR('',#623);+#638 = STYLED_ITEM('color',(#639),#299);+#639 = PRESENTATION_STYLE_ASSIGNMENT((#640));+#640 = SURFACE_STYLE_USAGE(.BOTH.,#641);+#641 = SURFACE_SIDE_STYLE('',(#642));+#642 = SURFACE_STYLE_FILL_AREA(#643);+#643 = FILL_AREA_STYLE('',(#644));+#644 = FILL_AREA_STYLE_COLOUR('',#623);+#645 = STYLED_ITEM('color',(#646),#348);+#646 = PRESENTATION_STYLE_ASSIGNMENT((#647));+#647 = SURFACE_STYLE_USAGE(.BOTH.,#648);+#648 = SURFACE_SIDE_STYLE('',(#649));+#649 = SURFACE_STYLE_FILL_AREA(#650);+#650 = FILL_AREA_STYLE('',(#651));+#651 = FILL_AREA_STYLE_COLOUR('',#623);+#652 = STYLED_ITEM('color',(#653),#397);+#653 = PRESENTATION_STYLE_ASSIGNMENT((#654));+#654 = SURFACE_STYLE_USAGE(.BOTH.,#655);+#655 = SURFACE_SIDE_STYLE('',(#656));+#656 = SURFACE_STYLE_FILL_AREA(#657);+#657 = FILL_AREA_STYLE('',(#658));+#658 = FILL_AREA_STYLE_COLOUR('',#623);+#659 = STYLED_ITEM('color',(#660),#429);+#660 = PRESENTATION_STYLE_ASSIGNMENT((#661));+#661 = SURFACE_STYLE_USAGE(.BOTH.,#662);+#662 = SURFACE_SIDE_STYLE('',(#663));+#663 = SURFACE_STYLE_FILL_AREA(#664);+#664 = FILL_AREA_STYLE('',(#665));+#665 = FILL_AREA_STYLE_COLOUR('',#623);+#666 = STYLED_ITEM('color',(#667),#478);+#667 = PRESENTATION_STYLE_ASSIGNMENT((#668));+#668 = SURFACE_STYLE_USAGE(.BOTH.,#669);+#669 = SURFACE_SIDE_STYLE('',(#670));+#670 = SURFACE_STYLE_FILL_AREA(#671);+#671 = FILL_AREA_STYLE('',(#672));+#672 = FILL_AREA_STYLE_COLOUR('',#623);+#673 = STYLED_ITEM('color',(#674),#527);+#674 = PRESENTATION_STYLE_ASSIGNMENT((#675));+#675 = SURFACE_STYLE_USAGE(.BOTH.,#676);+#676 = SURFACE_SIDE_STYLE('',(#677));+#677 = SURFACE_STYLE_FILL_AREA(#678);+#678 = FILL_AREA_STYLE('',(#679));+#679 = FILL_AREA_STYLE_COLOUR('',#623);+#680 = STYLED_ITEM('color',(#681),#554);+#681 = PRESENTATION_STYLE_ASSIGNMENT((#682));+#682 = SURFACE_STYLE_USAGE(.BOTH.,#683);+#683 = SURFACE_SIDE_STYLE('',(#684));+#684 = SURFACE_STYLE_FILL_AREA(#685);+#685 = FILL_AREA_STYLE('',(#686));+#686 = FILL_AREA_STYLE_COLOUR('',#623);+#687 = STYLED_ITEM('color',(#688),#563);+#688 = PRESENTATION_STYLE_ASSIGNMENT((#689));+#689 = SURFACE_STYLE_USAGE(.BOTH.,#690);+#690 = SURFACE_SIDE_STYLE('',(#691));+#691 = SURFACE_STYLE_FILL_AREA(#692);+#692 = FILL_AREA_STYLE('',(#693));+#693 = FILL_AREA_STYLE_COLOUR('',#694);+#694 = COLOUR_RGB('',0.78000000177,0.78000000177,0.760000013601);+#695 = STYLED_ITEM('color',(#696),#575);+#696 = PRESENTATION_STYLE_ASSIGNMENT((#697));+#697 = SURFACE_STYLE_USAGE(.BOTH.,#698);+#698 = SURFACE_SIDE_STYLE('',(#699));+#699 = SURFACE_STYLE_FILL_AREA(#700);+#700 = FILL_AREA_STYLE('',(#701));+#701 = FILL_AREA_STYLE_COLOUR('',#694);+#702 = STYLED_ITEM('color',(#703),#587);+#703 = PRESENTATION_STYLE_ASSIGNMENT((#704));+#704 = SURFACE_STYLE_USAGE(.BOTH.,#705);+#705 = SURFACE_SIDE_STYLE('',(#706));+#706 = SURFACE_STYLE_FILL_AREA(#707);+#707 = FILL_AREA_STYLE('',(#708));+#708 = FILL_AREA_STYLE_COLOUR('',#694);+#709 = STYLED_ITEM('color',(#710),#599);+#710 = PRESENTATION_STYLE_ASSIGNMENT((#711));+#711 = SURFACE_STYLE_USAGE(.BOTH.,#712);+#712 = SURFACE_SIDE_STYLE('',(#713));+#713 = SURFACE_STYLE_FILL_AREA(#714);+#714 = FILL_AREA_STYLE('',(#715));+#715 = FILL_AREA_STYLE_COLOUR('',#694);+ENDSEC;+END-ISO-10303-21;

@@ -0,0 +1,171 @@+{+  "slug": "ncp160afcs330t2g",+  "version": "0.1.0",+  "type": "component",+  "description": "onsemi Linear Voltage Regulators (LDO), WLCSP-4(0.6x0.6). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "power supply chip",+    "ncp160afcs330t2g",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "ncp160afcs330t2g.kicad_sym",+    "ncp160afcs330t2g.kicad_mod",+    "ncp160afcs330t2g.glb",+    "ncp160afcs330t2g.step",+    "ncp160afcs330t2g.lbr",+    "docs/hero.png",+    "docs/ncp160afcs330t2g-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html",+    "ncp160afcs330t2g-hero.glb",+    "ncp160afcs330t2g-hero.overlay.json",+    "ncp160afcs330t2g-etched.glb"+  ],+  "component": {+    "mpn": "NCP160AFCS330T2G",+    "manufacturer": "onsemi",+    "package": "WLCSP-4(0.6x0.6)",+    "pin_count": 4,+    "category": "Power Supply Chip",+    "subcategory": "Linear Voltage Regulators (LDO)",+    "datasheet": "https://www.onsemi.com/pdf/datasheet/ncp160afcs330t2-d.pdf",+    "parts": {+      "symbol": "ncp160afcs330t2g.kicad_sym",+      "footprint": "ncp160afcs330t2g.kicad_mod",+      "model_3d": "ncp160afcs330t2g-hero.glb",+      "model_3d_plain": "ncp160afcs330t2g-etched.glb",+      "model_3d_step": "ncp160afcs330t2g-etched.step",+      "model_3d_step_plain": "ncp160afcs330t2g.step",+      "lbr": "ncp160afcs330t2g.lbr"+    },+    "distributor_links": {+      "lcsc": "C435717",+      "digikey": "NCP160AFCS330T2GOSTR-ND",+      "mouser": "863-NCP160AFCS330T2G"+    },+    "distributor_check": {+      "checked_at": "2026-10-27T01:11:27Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "NCP160AFCS330T2GOSTR-ND",+        "status": "found",+        "lifecycle": "Active"+      },+      "mouser": {+        "pn": "863-NCP160AFCS330T2G",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "A1",+        "name": "IN",+        "type": "power_in",+        "description": "Input voltage supply pin, operating range 1.9 V to 5.5 V."+      },+      {+        "number": "A2",+        "name": "OUT",+        "type": "power_out",+        "description": "Regulated output voltage; the output should be bypassed with a small 1 µF ceramic capacitor."+      },+      {+        "number": "B1",+        "name": "EN",+        "type": "input",+        "description": "Chip enable: VEN < 0.4 V disables the regulator, VEN > 1.2 V enables the LDO."+      },+      {+        "number": "B2",+        "name": "GND",+        "type": "power_in",+        "description": "Common ground connection."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.3",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.3",+        "primary_model": "claude-sonnet-5-5",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: NCP160AFCS330T2G is the 3.3 V active-discharge version in WLCSP4 CASE 567KA per the ordering table ("+        ],+        "pages_sent": 21,+        "cost_usd": 0.1774,+        "at": "2026-10-27T01:10:19"+      },+      "datasheet": {+        "url": "https://www.onsemi.com/pdf/datasheet/ncp160afcs330t2-d.pdf",+        "pages": 21,+        "sha256": "fd2551355d7dbaa8",+        "source_tier": "mfr"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 4,+        "described": 4,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    },+    "models_3d": [+      {+        "file": "ncp160afcs330t2g.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          0.64,+          0.64,+          0.552+        ],+        "zmin_mm": -0.029,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "0411ad1e4d685517b0d13f9795f52258532270d919dc6a7f3e3d69407bdd6809",+        "checked": "2026-10-27",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "ncp160afcs330t2g-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          0.64,+          0.64,+          0.552+        ],+        "zmin_mm": -0.029,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "97abe2709e3be972d9b76097c6ae62f76c862b08c03ca3b0bdad7aa3f147380d",+        "checked": "2026-10-27",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]+  }+}

@@ -0,0 +1,177 @@+{+  "slug": "ncp160afcs330t2g",+  "version": "0.1.0",+  "type": "component",+  "description": "onsemi Linear Voltage Regulators (LDO), WLCSP-4(0.6x0.6). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "power supply chip",+    "ncp160afcs330t2g",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "ncp160afcs330t2g.kicad_sym",+    "ncp160afcs330t2g.kicad_mod",+    "ncp160afcs330t2g.glb",+    "ncp160afcs330t2g.step",+    "ncp160afcs330t2g.lbr",+    "docs/hero.png",+    "docs/ncp160afcs330t2g-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html",+    "ncp160afcs330t2g-hero.glb",+    "ncp160afcs330t2g-hero.overlay.json",+    "ncp160afcs330t2g-etched.glb"+  ],+  "component": {+    "mpn": "NCP160AFCS330T2G",+    "manufacturer": "onsemi",+    "package": "WLCSP-4(0.6x0.6)",+    "pin_count": 4,+    "category": "Power Supply Chip",+    "subcategory": "Linear Voltage Regulators (LDO)",+    "datasheet": "https://www.onsemi.com/pdf/datasheet/ncp160afcs330t2-d.pdf",+    "parts": {+      "symbol": "ncp160afcs330t2g.kicad_sym",+      "footprint": "ncp160afcs330t2g.kicad_mod",+      "model_3d": "ncp160afcs330t2g-hero.glb",+      "model_3d_plain": "ncp160afcs330t2g-etched.glb",+      "model_3d_step": "ncp160afcs330t2g-etched.step",+      "model_3d_step_plain": "ncp160afcs330t2g.step",+      "lbr": "ncp160afcs330t2g.lbr"+    },+    "distributor_links": {+      "lcsc": "C435717",+      "digikey": "NCP160AFCS330T2GOSTR-ND",+      "mouser": "863-NCP160AFCS330T2G"+    },+    "distributor_check": {+      "checked_at": "2026-10-27T01:11:27Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "NCP160AFCS330T2GOSTR-ND",+        "status": "found",+        "lifecycle": "Active"+      },+      "mouser": {+        "pn": "863-NCP160AFCS330T2G",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "A1",+        "name": "IN",+        "type": "power_in",+        "description": "Input voltage supply pin, operating range 1.9 V to 5.5 V."+      },+      {+        "number": "A2",+        "name": "OUT",+        "type": "power_out",+        "description": "Regulated output voltage; the output should be bypassed with a small 1 µF ceramic capacitor."+      },+      {+        "number": "B1",+        "name": "EN",+        "type": "input",+        "description": "Chip enable: VEN < 0.4 V disables the regulator, VEN > 1.2 V enables the LDO."+      },+      {+        "number": "B2",+        "name": "GND",+        "type": "power_in",+        "description": "Common ground connection."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.3",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.3",+        "primary_model": "claude-sonnet-5-5",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: NCP160AFCS330T2G is the 3.3 V active-discharge version in WLCSP4 CASE 567KA per the ordering table ("+        ],+        "pages_sent": 21,+        "cost_usd": 0.1774,+        "at": "2026-10-27T01:10:19"+      },+      "datasheet": {+        "url": "https://www.onsemi.com/pdf/datasheet/ncp160afcs330t2-d.pdf",+        "pages": 21,+        "sha256": "fd2551355d7dbaa8",+        "source_tier": "mfr"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 4,+        "described": 4,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    },+    "models_3d": [+      {+        "file": "ncp160afcs330t2g.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          0.64,+          0.64,+          0.552+        ],+        "zmin_mm": -0.029,+        "centre_offset_mm": 0,+        "footprint_binding": "identity",+        "sha256": "0411ad1e4d685517b0d13f9795f52258532270d919dc6a7f3e3d69407bdd6809",+        "checked": "2026-10-27",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "ncp160afcs330t2g-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          0.64,+          0.64,+          0.552+        ],+        "zmin_mm": -0.029,+        "centre_offset_mm": 0,+        "footprint_binding": "identity",+        "sha256": "97abe2709e3be972d9b76097c6ae62f76c862b08c03ca3b0bdad7aa3f147380d",+        "checked": "2026-10-27",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file