component
NCP1399APDR2G
Public Made by Adomby adom
onsemi AC-DC Controllers and Regulators, SOIC-16-EP. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+152−8@@ -1,13 +1,162 @@ {+ "schema_version": 1,+ "type": "component", "slug": "ncp1399apdr2g",+ "title": "NCP1399APDR2G",+ "brief": "onsemi AC-DC Controllers and Regulators, SOIC-16-EP. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "version": "0.1.0",- "type": "component",- "description": "onsemi AC-DC Controllers and Regulators, SOIC-16-EP. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "license": "CC-BY-SA-4.0", "tags": [ "component", "pmic", "ncp1399apdr2g" ],+ "component": {+ "mpn": "NCP1399APDR2G",+ "manufacturer": "onsemi",+ "package": "SOIC-16-EP",+ "pin_count": 14,+ "category": "PMIC",+ "subcategory": "AC-DC Controllers and Regulators",+ "datasheet": "https://www.onsemi.com/pdf/datasheet/ncp1399ap-d.pdf",+ "parts": {+ "symbol": "ncp1399apdr2g.kicad_sym",+ "footprint": "ncp1399apdr2g.kicad_mod",+ "model_3d": "ncp1399apdr2g.glb",+ "model_3d_step": "ncp1399apdr2g.step",+ "lbr": "ncp1399apdr2g.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "HV",+ "type": "power_in",+ "description": "High-voltage startup current source input. Connects to the rectified AC line or bulk capacitor (up to 600 V) to implement the internal startup current source and Dynamic Self-Supply (DSS)."+ },+ {+ "number": "3",+ "name": "VBULK/PFCFB",+ "type": "input",+ "description": "Bulk voltage monitoring input. Receives a resistor-divided bulk-voltage sample to implement Brown-Out protection (0 to 5.5 V absolute max)."+ },+ {+ "number": "4",+ "name": "SKIP/REM",+ "type": "input",+ "description": "Skip threshold adjust / Off-mode (remote) control input. A resistor to GND sets the skip-in threshold (NCP1399Ay). Pulled up by external auxiliary source to activate off-mode/standby; pull-down by optocoupler deactivates off-mode (NCP1399By)."+ },+ {+ "number": "5",+ "name": "LLCFB",+ "type": "input",+ "description": "LLC feedback input. Defines operating frequency based on load; controls skip-mode entry under light load and, for NCP1399Ay, activates off-mode operation."+ },+ {+ "number": "6",+ "name": "LLCCS",+ "type": "input",+ "description": "LLC current-sense input. Senses divided resonant-capacitor voltage to perform on-time modulation, out-of-resonance switching protection, over-current protection, and secondary-side short-circuit protection (-5 to +5 V abs max)."+ },+ {+ "number": "7",+ "name": "OTP/OVP",+ "type": "input",+ "description": "Combined over-temperature and over-voltage protection input. A single pin implements both OTP and OVP latch triggers (0 to 5.5 V abs max)."+ },+ {+ "number": "8",+ "name": "PON/OFF",+ "type": "input",+ "description": "PFC turn-off feedback-level adjust. Sets the FB threshold below which the external PFC stage is disabled, enabling load-dependent PFC on/off control."+ },+ {+ "number": "9",+ "name": "PFCMODE",+ "type": "output",+ "description": "PFC mode / external HV switch control output. Provides supply voltage to the PFC front-stage controller and/or enables the VBULK sensing network HV switch."+ },+ {+ "number": "10",+ "name": "VCC",+ "type": "power_in",+ "description": "Controller supply input. Accepts up to 20 V; VCC_ON ~15.8 V (or ~12 V on AL/AM/AR/AS variants), VCC_OFF ~9.5 V UVLO. Operating current 5.4 mA typ at 100 kHz."+ },+ {+ "number": "11",+ "name": "GND",+ "type": "power_in",+ "description": "Analog ground. Common return for adjustment components, sensing networks, and low-side driver output."+ },+ {+ "number": "12",+ "name": "MLOWER",+ "type": "output",+ "description": "Low-side gate driver output. Drives the lower MOSFET of the half-bridge; output swings 0 to VCC (up to ~20 V)."+ },+ {+ "number": "14",+ "name": "MUPPER",+ "type": "output",+ "description": "High-side (floating) gate driver output. Drives the upper MOSFET of the half-bridge, referenced to HB with supply from VBOOT."+ },+ {+ "number": "15",+ "name": "HB",+ "type": "power_in",+ "description": "Half-bridge connection / high-side driver return. Connects to the switching node between the two half-bridge MOSFETs; withstands up to ~600 V and dV/dt up to 50 V/ns."+ },+ {+ "number": "16",+ "name": "VBOOT",+ "type": "power_in",+ "description": "Bootstrap supply pin. Provides the floating VCC for the high-side driver referenced to HB (VBOOT_ON ~9 V, VBOOT_OFF ~8.2 V, up to 620 V absolute)."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://www.onsemi.com/pdf/datasheet/ncp1399ap-d.pdf",+ "pages": 45,+ "sha256": "a9c71c608fac5987",+ "source_tier": "mfr"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 14,+ "described": 14,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "metadata": {+ "specs": {+ "Manufacturer": "onsemi",+ "Package": "SOIC-16-EP",+ "Category": "PMIC",+ "Pins": "14"+ }+ },+ "sections": [+ "hero",+ "viewers",+ "readme",+ "breadcrumbs",+ "info"+ ],+ "discovery_triggers": [+ "ncp1399apdr2g"+ ],+ "discovery_pitch": "NCP1399APDR2G (onsemi) component page with datasheet-verified CAD.",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }, "dependencies": {}, "hero": { "type": "image",@@ -25,10 +174,5 @@ "docs/ncp1399apdr2g-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": "public",- "author": {- "name": "Ray",- "email": "[email protected]"- }+ ] }