← Commit history
page.json+152−8@@ -1,13 +1,162 @@ {+ "schema_version": 1,+ "type": "component", "slug": "ncp1399aadr2g",+ "title": "NCP1399AADR2G",+ "brief": "onsemi AC-DC Controllers and Regulators, SOIC-16-EP. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "version": "0.1.0",- "type": "component",- "description": "onsemi AC-DC Controllers and Regulators, SOIC-16-EP. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "license": "CC-BY-SA-4.0", "tags": [ "component", "pmic", "ncp1399aadr2g" ],+ "component": {+ "mpn": "NCP1399AADR2G",+ "manufacturer": "onsemi",+ "package": "SOIC-16-EP",+ "pin_count": 14,+ "category": "PMIC",+ "subcategory": "AC-DC Controllers and Regulators",+ "datasheet": "https://www.onsemi.com/pdf/datasheet/ncp1399aa-d.pdf",+ "parts": {+ "symbol": "ncp1399aadr2g.kicad_sym",+ "footprint": "ncp1399aadr2g.kicad_mod",+ "model_3d": "ncp1399aadr2g.glb",+ "model_3d_step": "ncp1399aadr2g.step",+ "lbr": "ncp1399aadr2g.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "HV",+ "type": "power_in",+ "description": "High-voltage startup current source input. Connects to the rectified AC line or bulk capacitor to perform startup current-source and Dynamic Self-Supply functions. Absolute max 600 V."+ },+ {+ "number": "3",+ "name": "VBULK/PFCFB",+ "type": "input",+ "description": "Bulk voltage monitoring input. Receives a divided bulk voltage to implement brown-out protection and PFC feedback. Absolute max -0.3 to 5.5 V."+ },+ {+ "number": "4",+ "name": "SKIP/REM",+ "type": "input",+ "description": "Skip threshold adjust / off-mode (remote) control input. On the NCP1399AA (Ay) version this pin sets the skip-in threshold via a resistor to ground and activates off-mode/Standby when pulled up by an external auxiliary voltage source. Absolute max -0.3 to 10 V (By) or -0.3 to 5.5 V (Ay)."+ },+ {+ "number": "5",+ "name": "LLC FB",+ "type": "input",+ "description": "LLC feedback input. Defines the operating frequency based on the load; activates skip mode under light load and (on NCP1399Ay) activates off-mode. Absolute max -0.3 to 5.5 V."+ },+ {+ "number": "6",+ "name": "LLC CS",+ "type": "input",+ "description": "LLC current sense input. Reads the divided resonant capacitor voltage to perform on-time modulation, out-of-resonance protection, over-current protection and secondary-side short-circuit protection. Absolute max -5 to 5 V."+ },+ {+ "number": "7",+ "name": "OTP/OVP",+ "type": "input",+ "description": "Combined over-temperature and over-voltage protection input on a single pin. Absolute max -0.3 to 5.5 V."+ },+ {+ "number": "8",+ "name": "PON/OFF",+ "type": "output",+ "description": "PFC turn-off FB level adjust. Pulls the FB pin below a level at which the PFC front-stage operation is disabled. Absolute max -0.3 to 5.5 V."+ },+ {+ "number": "9",+ "name": "PFCMODE",+ "type": "output",+ "description": "PFC and external HV switch control output. Provides supply voltage for the PFC front-stage controller and/or enables the VBULK sensing network HV switch. Absolute max -0.3 to VCC+0.3 V."+ },+ {+ "number": "10",+ "name": "VCC",+ "type": "power_in",+ "description": "Controller supply voltage. Accepts up to 20 V; typical turn-on threshold 15.8 V, turn-off 9.5 V."+ },+ {+ "number": "11",+ "name": "GND",+ "type": "power_in",+ "description": "Analog ground. Common ground for adjustment components, sensing networks and driver outputs."+ },+ {+ "number": "12",+ "name": "MLOWER",+ "type": "output",+ "description": "Low-side driver output. Drives the lower half-bridge MOSFET. Absolute max -0.3 to VCC+0.3 V."+ },+ {+ "number": "14",+ "name": "MUPPER",+ "type": "output",+ "description": "High-side (floating) driver output. Drives the upper half-bridge MOSFET, referenced to HB. Absolute max VHB-0.3 to VBOOT+0.3 V."+ },+ {+ "number": "15",+ "name": "HB",+ "type": "power_in",+ "description": "Half-bridge (high-side floating return). Connects to the switching node between the two half-bridge MOSFETs. Absolute max VBOOT-20 to VBOOT+0.3 V."+ },+ {+ "number": "16",+ "name": "VBOOT",+ "type": "power_in",+ "description": "Bootstrap pin - floating VCC supply for the upper (high-side) driver stage. Absolute max -0.3 to 620 V."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://www.onsemi.com/pdf/datasheet/ncp1399aa-d.pdf",+ "pages": 46,+ "sha256": "6d7b37a399261c52",+ "source_tier": "mfr"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 14,+ "described": 14,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "metadata": {+ "specs": {+ "Manufacturer": "onsemi",+ "Package": "SOIC-16-EP",+ "Category": "PMIC",+ "Pins": "14"+ }+ },+ "sections": [+ "hero",+ "viewers",+ "readme",+ "breadcrumbs",+ "info"+ ],+ "discovery_triggers": [+ "ncp1399aadr2g"+ ],+ "discovery_pitch": "NCP1399AADR2G (onsemi) component page with datasheet-verified CAD.",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }, "dependencies": {}, "hero": { "type": "image",@@ -25,10 +174,5 @@ "docs/ncp1399aadr2g-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": "public",- "author": {- "name": "Ray",- "email": "[email protected]"- }+ ] }