← Commit history

Initial commit: component/ncp1380ddr2g

Ray ·08096f59b2 ·
2 files changed +84
README.mdadded+50
@@ -0,0 +1,50 @@+# NCP1380DDR2G++**onsemi** · AC-DC Controllers and Regulators · SOIC-8++NCP1380DDR2G from onsemi, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | ZCD | input | Zero Crossing Detection input - connected to the transformer auxiliary winding to detect core-reset events (55 mV typ. falling threshold, 35 mV hysteresis). Also serves as the Over Power Protection (OPP) input: a negative voltage down to -300 mV applied during on-time reduces the internal peak-current setpoint by up to 37.5%. Internally clamped (-0.7 V low / +10 V high), ±3/-2 mA max. |+| 2 | FB | input | Feedback input from optocoupler collector for output regulation. Internally pulled up (~18 kΩ) to VDD. FB voltage sets the operating valley (1st→4th) and enters VCO frequency-foldback mode below 0.8 V (falling)/1.4 V (rising). Peak-current setpoint = VFB/4. |+| 3 | CS | input | Current Sense input monitoring the primary MOSFET peak current via an external sense resistor. Cycle-by-cycle current limit at VILIM = 0.8 V (with 275 ns leading-edge blanking). A second faster comparator at VCS(stop) = 1.2 V (120 ns LEB) provides immediate winding-short protection. |+| 4 | GND | power_in | Controller ground reference for all internal circuitry and the gate driver return. |+| 5 | DRV | output | Gate-driver output to the external primary MOSFET. +500 mA source / -800 mA sink peak capability (RSRC ≈ 20 Ω, RSNK ≈ 12.5 Ω). Output high clamped to ~13 V typ (10.5-15.5 V), rise/fall ≈ 40/25 ns into 1 nF. Absolute max 20 V, ±1000 mA. |+| 6 | VCC | power_in | Controller supply, fed from an auxiliary winding. VCC(on) = 17 V typ startup, VCC(off) = 9 V typ UVLO, operating up to 28 V max. Startup current ~10 µA; ICC ≈ 2.65 mA switching at 65 kHz with 1 nF DRV load. Clamped to VCC(latch) ≈ 7.2 V when latched off. |+| 7 | Fault | bidirectional | Combined protection pin. On the D variant (this part): Brown-Out / OVP - a resistor divider from the HV bulk rail is sensed against VBO = 0.8 V (falling) with a 10 µA hysteresis source; a zener-diode injection above VOVP = 2.5 V latches the controller off. Internal clamp Rclamp ≈ 1.55 kΩ / Vclamp ≈ 1.2 V limits pin voltage; open-pin clamp 1.0-1.4 V. |+| 8 | CT | passive | Timing-capacitor pin for VCO/frequency-foldback mode. An external capacitor (≈220 pF recommended) is charged by a 20 µA source and compared to an FB-derived threshold; when it reaches the threshold the cap is discharged and a new switching period starts. VCT(MAX) ≈ 5.4 V. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | onsemi |+| Package | SOIC-8 |+| Category | PMIC |+| Pins | 8 |++## Ordering variants++- `NCP1380DDR2GADR2G`+- `NCP1380DDR2GBDR2G`+- `NCP1380DDR2GCDR2G`+- `NCP1380DDR2G`++## CAD (KiCad official)++- Symbol: `NCP1380DDR2G`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SOIC-8 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [onsemi datasheet](https://www.onsemi.com/pdf/datasheet/ncp1380d-d.pdf) (None pp, sha256 `8261db6e470f022e`, retrieved 2026-08-17, tier: manufacturer)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ncp1380ddr2g-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "ncp1380ddr2g",+  "version": "0.1.0",+  "type": "component",+  "description": "onsemi AC-DC Controllers and Regulators, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "pmic",+    "ncp1380ddr2g"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "ncp1380ddr2g.kicad_sym",+    "ncp1380ddr2g.kicad_mod",+    "ncp1380ddr2g.glb",+    "ncp1380ddr2g.step",+    "ncp1380ddr2g.lbr",+    "docs/hero.png",+    "docs/ncp1380ddr2g-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file