← Commit history
page.json+8−5@@ -56,25 +56,25 @@ "number": "5", "name": "DRV", "type": "output",- "description": "Totem-pole gate-driver output for the external primary-side MOSFET. Sources 300 mA / sinks 500 mA and is internally clamped to VDRV(high) (~12 V typ). Maximum voltage range \u22120.3 V to VDRV; current range \u2212500 mA / +800 mA."+ "description": "Totem-pole gate-driver output for the external primary-side MOSFET. Sources 300 mA / sinks 500 mA and is internally clamped to VDRV(high) (~12 V typ). Maximum voltage range −0.3 V to VDRV; current range −500 mA / +800 mA." }, { "number": "6", "name": "VCC", "type": "power_in",- "description": "Controller supply voltage. Operates over a wide VCC range with VCC(on) \u2248 12 V startup threshold, VCC(off) \u2248 9 V UVLO, and absolute maximum +35 V; a low VCC(on) allows powering from a standby auxiliary supply. Includes VCC over-voltage protection (auto-recovery on the 'B' variant)."+ "description": "Controller supply voltage. Operates over a wide VCC range with VCC(on) ≈ 12 V startup threshold, VCC(off) ≈ 9 V UVLO, and absolute maximum +35 V; a low VCC(on) allows powering from a standby auxiliary supply. Includes VCC over-voltage protection (auto-recovery on the 'B' variant)." }, { "number": "7", "name": "VIN", "type": "input",- "description": "HV-rail sense input: performs brown-out protection, line voltage sensing for valley selection and line feed-forward, and adjustable OVP. Typically fed from a resistor divider off the bulk/HV rail; a Zener to this pin can be used to trigger the adjustable OVP shutdown (OVP2). Absolute max \u22120.3 V to +5.5 V."+ "description": "HV-rail sense input: performs brown-out protection, line voltage sensing for valley selection and line feed-forward, and adjustable OVP. Typically fed from a resistor divider off the bulk/HV rail; a Zener to this pin can be used to trigger the adjustable OVP shutdown (OVP2). Absolute max −0.3 V to +5.5 V." }, { "number": "8", "name": "DIM", "type": "input",- "description": "Analog or PWM dimming control input, also used to enter OFF mode. An analog voltage between VDIM(EN) and VDIM100 sets the LED current; alternatively a PWM signal with amplitude greater than VDIM100 performs digital dimming. Absolute max \u22120.3 V to +7 V."+ "description": "Analog or PWM dimming control input, also used to enter OFF mode. An analog voltage between VDIM(EN) and VDIM100 sets the LED current; alternatively a PWM signal with amplitude greater than VDIM100 performs digital dimming. Absolute max −0.3 V to +7 V." } ], "provenance": {@@ -144,5 +144,8 @@ "docs/ncp1370bdr2g-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }