← Commit history

Initial commit: component/ncp1336bdr2g

Ray ·fe725d4bc8 ·
2 files changed +87
README.mdadded+53
@@ -0,0 +1,53 @@+# NCP1336BDR2G++**onsemi** · AC-DC Controllers and Regulators · SOIC-13++NCP1336BDR2G from onsemi, in a SOIC-13. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | OPP | input | Over Power Protection adjust. A negative voltage on this pin reduces the internal maximum peak current setpoint. Connect via a resistor divider from an auxiliary winding to perform Over Power compensation. Grounding disables OPP. Max operating voltage -300 mV. |+| 2 | OTP | input | Over-Temperature Protection input. Connect an NTC between this pin and GND. Pin sources an internal current that biases the NTC; when the NTC pulls the pin low, the controller permanently latches off. |+| 3 | Timer | passive | Timer duration setting. Wiring a capacitor from this pin to ground selects the fault timer duration used for short-circuit protection. |+| 4 | ZCD | input | Zero Crossing Detection. Connect to the auxiliary winding to sense the core reset (demag) event for quasi-resonant valley switching. Max continuous -0.3 to 10 V; pulsed +12 V for <100 us. |+| 5 | Ct | passive | Timing Capacitor. A capacitor on this pin acts as the timing capacitor used by the foldback (VCO) mode to set the switching frequency at light load. |+| 6 | FB | input | Feedback input. Hook an optocoupler collector to this pin to allow output regulation via the internal PWM comparator. |+| 7 | CS | input | Current Sense input. Monitors the primary MOSFET peak current via an external sense resistor for cycle-by-cycle current-mode control and OCP. |+| 8 | GND | power_in | Controller ground reference for all analog and digital circuitry. |+| 9 | DRV | output | Driver Output to the gate of an external power MOSFET. Peak source/sink capability -500 mA / +800 mA. Max output voltage VCC + 1.0 V when in high state. |+| 10 | VCC | power_in | Controller supply. Connect to an external auxiliary winding rectified voltage. Max continuous VCC = 28 V, max current +/-30 mA. |+| 11 | BO | input | Brownout input. Senses the bulk (input) voltage to stop switching when the mains falls below a set threshold, preventing operation under low-line conditions. |+| 12 | OVP | input | Over-Voltage Protection input. Pulling this pin high permanently latches off the controller for output OVP. |+| 13 | NC | unconnected | No connection. Pin is omitted from the die for improved creepage between the low-voltage side and the high-voltage HV pin (pin 14). |+| 14 | HV | power_in | High-Voltage startup input. Connect to the bulk capacitor; powers the internal high-voltage current source that delivers startup current to VCC. Rated -0.3 to 500 V, +/-20 mA. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | onsemi |+| Package | SOIC-13 |+| Category | PMIC |+| Pins | 14 |++## Ordering variants++- `NCP1336BDR2G`++## CAD (KiCad official)++- Symbol: `NCP1336BDR2G`+- Footprint: `Package_SO:SOIC-14-16_3.9x9.9mm_P1.27mm`+- 3D model: SOIC-13 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [onsemi datasheet](https://www.onsemi.com/pdf/datasheet/ncp1336b-d.pdf) (26 pp, sha256 `d28ee456f629ead0`, retrieved 2026-08-17, tier: manufacturer)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ncp1336bdr2g-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "ncp1336bdr2g",+  "version": "0.1.0",+  "type": "component",+  "description": "onsemi AC-DC Controllers and Regulators, SOIC-13. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "pmic",+    "ncp1336bdr2g"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "ncp1336bdr2g.kicad_sym",+    "ncp1336bdr2g.kicad_mod",+    "ncp1336bdr2g.glb",+    "ncp1336bdr2g.step",+    "ncp1336bdr2g.lbr",+    "docs/hero.png",+    "docs/ncp1336bdr2g-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file