← Commit history
page.json+8−5@@ -32,7 +32,7 @@ "number": "1", "name": "OUT", "type": "power_out",- "description": "Regulated output voltage pin (3.0 V nominal for this OPN). A ceramic capacitor with a minimum value of 1 \u00b5F is required from this pin to GND for stability. Rated for up to 300 mA output current with typical dropout of 215 mV @ VOUT = 3.3 V, 300 mA."+ "description": "Regulated output voltage pin (3.0 V nominal for this OPN). A ceramic capacitor with a minimum value of 1 µF is required from this pin to GND for stability. Rated for up to 300 mA output current with typical dropout of 215 mV @ VOUT = 3.3 V, 300 mA." }, { "number": "2",@@ -44,19 +44,19 @@ "number": "3", "name": "EN", "type": "input",- "description": "Enable input (active high). Driving EN above 0.9 V turns on the regulator; driving EN below 0.4 V puts the regulator into shutdown (IDIS typ. 0.01 \u00b5A). Absolute max VEN = 6 V; typical EN pin input current 0.3 \u00b5A at VEN = 5.5 V."+ "description": "Enable input (active high). Driving EN above 0.9 V turns on the regulator; driving EN below 0.4 V puts the regulator into shutdown (IDIS typ. 0.01 µA). Absolute max VEN = 6 V; typical EN pin input current 0.3 µA at VEN = 5.5 V." }, { "number": "4", "name": "IN", "type": "power_in",- "description": "Input supply pin. Operating input voltage range 1.7 V to 5.5 V (absolute max 6 V). A small ceramic input capacitor (1 \u00b5F typical) from IN to GND is required for stability and transient performance."+ "description": "Input supply pin. Operating input voltage range 1.7 V to 5.5 V (absolute max 6 V). A small ceramic input capacitor (1 µF typical) from IN to GND is required for stability and transient performance." }, { "number": "EPAD", "name": "EPAD", "type": "power_in",- "description": "Exposed thermal pad on the bottom of the XDFN4 package. Must be connected directly to the GND pin and soldered to a large ground copper plane to allow effective heat removal (R\u03b8JA = 208 \u00b0C/W for XDFN4 1x1 mm)."+ "description": "Exposed thermal pad on the bottom of the XDFN4 package. Must be connected directly to the GND pin and soldered to a large ground copper plane to allow effective heat removal (RθJA = 208 °C/W for XDFN4 1x1 mm)." } ], "provenance": {@@ -130,5 +130,8 @@ "docs/ncp115amx300tcg-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }