← Commit history
ncp1117lpst50t3g: restore the component block (pinout + model declarations) from this page's own README and symbol
1 file changed
+45−1
page.json+45−1@@ -33,5 +33,49 @@ "author": { "name": "Ray", "email": "[email protected]"+ },+ "component": {+ "mpn": "NCP1117LPST50T3G",+ "manufacturer": "onsemi",+ "package": "SOT-223",+ "pin_count": 3,+ "category": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",+ "datasheet": "https://www.onsemi.com/pdf/datasheet/ncp1117lpst50t3-d.pdf",+ "parts": {+ "symbol": "ncp1117lpst50t3g.kicad_sym",+ "footprint": "ncp1117lpst50t3g.kicad_mod",+ "model_3d": "ncp1117lpst50t3g-etched.glb",+ "model_3d_plain": "ncp1117lpst50t3g.glb",+ "model_3d_step": "ncp1117lpst50t3g-etched.step",+ "model_3d_step_plain": "ncp1117lpst50t3g.step",+ "lbr": "ncp1117lpst50t3g.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference pin. For the fixed 5.0 V version (ST50), this pin is the device ground return; the internal resistor divider is included within the device and ground current I_gnd is 550 uA typical. All voltages are referenced to this pin."+ },+ {+ "number": "2",+ "name": "Vout",+ "type": "power_out",+ "description": "Regulated output of the LDO, fixed at 5.0 V nominal (4.900 V min / 5.100 V max at TJ=25 C, 6.5 V<=Vin<=12 V, Io=10 mA). A minimum 10 uF output capacitor (20 mOhm <= ESR <= 20 Ohm) must be connected from this pin to ground to ensure stability. The SOT-223 heatsink tab is internally connected to this pin."+ },+ {+ "number": "3",+ "name": "Vin",+ "type": "power_in",+ "description": "Regulator input pin, up to 18 V max DC input voltage. A large storage capacitor (20 mOhm <= ESR <= 20 Ohm) is typically connected from this pin to ground to prevent input sag during load transients. Vin must always be at least 1.3 V (typ dropout) higher than Vout for proper regulation."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ } }-}+}