← Commit history
ncp1015ap065g: restore the component block (pinout + model declarations) from this page's own README and symbol
1 file changed
+69−1
page.json+69−1@@ -33,5 +33,73 @@ "author": { "name": "Ray", "email": "[email protected]"+ },+ "component": {+ "mpn": "NCP1015AP065G",+ "manufacturer": "onsemi",+ "package": "DIP-7",+ "pin_count": 7,+ "category": "AC-DC Controllers and Regulators",+ "datasheet": "https://www.onsemi.com/pdf/datasheet/ncp1015ap065-d.pdf",+ "parts": {+ "symbol": "ncp1015ap065g.kicad_sym",+ "footprint": "ncp1015ap065g.kicad_mod",+ "model_3d": "ncp1015ap065g-etched.glb",+ "model_3d_plain": "ncp1015ap065g.glb",+ "model_3d_step": "ncp1015ap065g-etched.step",+ "model_3d_step_plain": "ncp1015ap065g.step",+ "lbr": "ncp1015ap065g.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "VCC",+ "type": "power_in",+ "description": "Powers the internal circuitry. Connect an external decoupling capacitor of typically 10 µF; the natural ripple on VCC participates in frequency jittering. Operating window ~7.5 V (turn-on) to 8.5 V (turn-off), with an internal ~8.7 V active shunt providing opto fail-safe protection. Can be biased by an auxiliary winding to stop the DSS and reduce standby power."+ },+ {+ "number": "2",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection. Provided for lead spacing/creepage; leave floating."+ },+ {+ "number": "3",+ "name": "GND",+ "type": "power_in",+ "description": "IC ground reference. Tie together with pin 7 and pin 8 to the system ground / source of the internal MOSFET current-sense."+ },+ {+ "number": "4",+ "name": "FB",+ "type": "input",+ "description": "Feedback signal input. Connecting an optocoupler collector to this pin (internal ~18 kΩ pull-up to ~4 V) adjusts the primary peak-current setpoint versus output-power demand. Pulling FB low reduces peak current and eventually enters skip-cycle mode at ~25% of Ipeak."+ },+ {+ "number": "5",+ "name": "DRAIN",+ "type": "power_out",+ "description": "Drain of the internal 700 V, ~11 Ω power MOSFET and input of the high-voltage start-up current source (~8 mA). Connect to the transformer primary and to the rectified high-voltage bulk rail (up to 700 V absolute max, 1 A peak drain current during transformer saturation)."+ },+ {+ "number": "7",+ "name": "GND",+ "type": "power_in",+ "description": "IC ground / MOSFET source return. Tie to pin 3 and pin 8. Pin 6 is intentionally omitted from the PDIP-7 package to increase creepage distance between the high-voltage DRAIN pin and the low-voltage ground pins."+ },+ {+ "number": "8",+ "name": "GND",+ "type": "power_in",+ "description": "IC ground / MOSFET source return. Tie to pin 3 and pin 7 to complete the low-side current path."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ } }-}+}