← Commit history
page.json+15−12@@ -62,19 +62,19 @@ "number": "6", "name": "CI/O", "type": "bidirectional",- "description": "Bidirectional level-shifted I/O to smart-card connector pin C7. Internal ~11 k\u03a9 pull-up to CVCC provides high-impedance idle state for the card I/O line."+ "description": "Bidirectional level-shifted I/O to smart-card connector pin C7. Internal ~11 kΩ pull-up to CVCC provides high-impedance idle state for the card I/O line." }, { "number": "7", "name": "CAUX2", "type": "bidirectional",- "description": "Bidirectional level-shifted auxiliary AUX2 I/O to smart-card connector pin C8. Internal ~11 k\u03a9 pull-up to CVCC provides high-impedance idle state."+ "description": "Bidirectional level-shifted auxiliary AUX2 I/O to smart-card connector pin C8. Internal ~11 kΩ pull-up to CVCC provides high-impedance idle state." }, { "number": "8", "name": "CAUX1", "type": "bidirectional",- "description": "Bidirectional level-shifted auxiliary AUX1 I/O to smart-card connector pin C4. Internal ~11 k\u03a9 pull-up to CVCC provides high-impedance idle state."+ "description": "Bidirectional level-shifted auxiliary AUX1 I/O to smart-card connector pin C4. Internal ~11 kΩ pull-up to CVCC provides high-impedance idle state." }, { "number": "9",@@ -92,7 +92,7 @@ "number": "11", "name": "CVCC", "type": "power_out",- "description": "Programmable card power-supply output (card pin C1). Delivers 1.8 V / 3.0 V / 5.0 V (\u00b15%) at up to 70 mA, programmable via VSEL0/VSEL1. Requires an external distributed ceramic capacitor 80 nF-1.2 \u00b5F (ESR < 100 m\u03a9) between CVCC and CGND."+ "description": "Programmable card power-supply output (card pin C1). Delivers 1.8 V / 3.0 V / 5.0 V (±5%) at up to 70 mA, programmable via VSEL0/VSEL1. Requires an external distributed ceramic capacitor 80 nF-1.2 µF (ESR < 100 mΩ) between CVCC and CGND." }, { "number": "12",@@ -104,7 +104,7 @@ "number": "13", "name": "CMDVCC", "type": "input",- "description": "Active-low command-VCC / activation-enable input. Toggling CMDVCC High\u2192Low with a card present starts the ISO7816 activation sequence; when CMDVCC=High the CVCC output is pulled low and the internal LDO is disabled (unless latched by CS)."+ "description": "Active-low command-VCC / activation-enable input. Toggling CMDVCC High→Low with a card present starts the ISO7816 activation sequence; when CMDVCC=High the CVCC output is pulled low and the internal LDO is disabled (unless latched by CS)." }, { "number": "14",@@ -116,7 +116,7 @@ "number": "15", "name": "VDD", "type": "power_in",- "description": "System-controller (host) power supply, 1.6-5.5 V. Sets the host-side logic-level of the level shifters. A 0.1 \u00b5F decoupling capacitor is required. When VDD falls below ~1.45 V the card pins are disabled."+ "description": "System-controller (host) power supply, 1.6-5.5 V. Sets the host-side logic-level of the level shifters. A 0.1 µF decoupling capacitor is required. When VDD falls below ~1.45 V the card pins are disabled." }, { "number": "16",@@ -128,7 +128,7 @@ "number": "17", "name": "INT", "type": "output",- "description": "Active-low interrupt request to the host. Asserted on card-presence changes detected via PRES/PRES and on faults (e.g. CVCC overload). Open-drain-like output with an ~50 k\u03a9 pull-up (available with metal-change option)."+ "description": "Active-low interrupt request to the host. Asserted on card-presence changes detected via PRES/PRES and on faults (e.g. CVCC overload). Open-drain-like output with an ~50 kΩ pull-up (available with metal-change option)." }, { "number": "18",@@ -140,19 +140,19 @@ "number": "19", "name": "I/Ouc", "type": "bidirectional",- "description": "Host-side bidirectional I/O corresponding to card CI/O. Level-translated between the microcontroller (VDD domain) and the smart card (CVCC domain). Built-in ~11 k\u03a9 pull-up provides high-impedance state."+ "description": "Host-side bidirectional I/O corresponding to card CI/O. Level-translated between the microcontroller (VDD domain) and the smart card (CVCC domain). Built-in ~11 kΩ pull-up provides high-impedance state." }, { "number": "20", "name": "AUX1uc", "type": "bidirectional",- "description": "Host-side bidirectional auxiliary line corresponding to card CAUX1 (C4). Level-translated between the microcontroller (VDD) and the card (CVCC); built-in ~11 k\u03a9 pull-up."+ "description": "Host-side bidirectional auxiliary line corresponding to card CAUX1 (C4). Level-translated between the microcontroller (VDD) and the card (CVCC); built-in ~11 kΩ pull-up." }, { "number": "21", "name": "AUX2uc", "type": "bidirectional",- "description": "Host-side bidirectional auxiliary line corresponding to card CAUX2 (C8). Level-translated between the microcontroller (VDD) and the card (CVCC); built-in ~11 k\u03a9 pull-up."+ "description": "Host-side bidirectional auxiliary line corresponding to card CAUX2 (C8). Level-translated between the microcontroller (VDD) and the card (CVCC); built-in ~11 kΩ pull-up." }, { "number": "22",@@ -164,7 +164,7 @@ "number": "23", "name": "CLKDIV2", "type": "input",- "description": "Clock-divider select bit 2. Combined with CLKDIV1 programs the CLKIN\u2192CCLK division ratio."+ "description": "Clock-divider select bit 2. Combined with CLKDIV1 programs the CLKIN→CCLK division ratio." }, { "number": "24",@@ -246,5 +246,8 @@ "docs/ncn8026amntxg-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }