← Commit history

Initial commit: component/ncn8026amntxg

Ray ·792486ff2e ·
2 files changed +100
README.mdadded+66
@@ -0,0 +1,66 @@+# NCN8026AMNTXG++**onsemi** · Interface - Specialized · QFN-24-EP(4x4)++NCN8026AMNTXG from onsemi, in a QFN-24-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VSEL0 | input | Card VCC voltage-select bit 0. Combined with VSEL1 selects 5 V, 3 V or 1.8 V (5V/3V mode when VSEL0=Low; 1.8V/3V mode when VSEL0=High; VSEL1 selects between the two levels of the chosen mode). |+| 2 | CS | input | Active-low chip select. When CS is Low the control and signal pins are configured normally; when CS is High, CMDVCC, VSEL0, VSEL1, CLKDIV1, CLKDIV2 and RSTIN are latched, and I/Ouc, AUX1uc, AUX2uc go to high-impedance pull-up. |+| 3 | VDDP | power_in | Regulator power supply (2.7-5.5 V depending on selected CVCC mode). When VDDP falls below ~2.5 V the card pins are disabled. |+| 4 | PRES | input | Active-low card-presence input (card present when PRES=Low) with an ~8 ms built-in debounce timer. Intended for normally-open (NO) smart-card connectors; may be left open when unused. |+| 5 | PRES | input | Active-high card-presence input (card present when PRES=High) with an ~8 ms built-in debounce timer. Intended for normally-closed (NC) smart-card connectors; may be left open when unused. |+| 6 | CI/O | bidirectional | Bidirectional level-shifted I/O to smart-card connector pin C7. Internal ~11 kΩ pull-up to CVCC provides high-impedance idle state for the card I/O line. |+| 7 | CAUX2 | bidirectional | Bidirectional level-shifted auxiliary AUX2 I/O to smart-card connector pin C8. Internal ~11 kΩ pull-up to CVCC provides high-impedance idle state. |+| 8 | CAUX1 | bidirectional | Bidirectional level-shifted auxiliary AUX1 I/O to smart-card connector pin C4. Internal ~11 kΩ pull-up to CVCC provides high-impedance idle state. |+| 9 | CCLK | output | Smart-card clock output (drives card pin C3). Derived from CLKIN through the internal clock divider and level shifter; supports up to 27 MHz. |+| 10 | CRST | output | Smart-card RESET output to card connector pin C2. Level-shifted from the host RSTIN signal to CVCC level. |+| 11 | CVCC | power_out | Programmable card power-supply output (card pin C1). Delivers 1.8 V / 3.0 V / 5.0 V (±5%) at up to 70 mA, programmable via VSEL0/VSEL1. Requires an external distributed ceramic capacitor 80 nF-1.2 µF (ESR < 100 mΩ) between CVCC and CGND. |+| 12 | PORADJ | input | Power-on-reset threshold adjustment input. External resistor divider on VDD sets the VDD UVLO / POR threshold (rising ~1.24 V, falling ~1.19 V typical at PORADJ). Tie to GND when unused. |+| 13 | CMDVCC | input | Active-low command-VCC / activation-enable input. Toggling CMDVCC High→Low with a card present starts the ISO7816 activation sequence; when CMDVCC=High the CVCC output is pulled low and the internal LDO is disabled (unless latched by CS). |+| 14 | RSTIN | input | Host-side reset input, referenced to VDD. Level-shifted internally and driven to the smart card via CRST at the CVCC-programmed voltage. |+| 15 | VDD | power_in | System-controller (host) power supply, 1.6-5.5 V. Sets the host-side logic-level of the level shifters. A 0.1 µF decoupling capacitor is required. When VDD falls below ~1.45 V the card pins are disabled. |+| 16 | GND | power_in | Digital / host-side ground reference. |+| 17 | INT | output | Active-low interrupt request to the host. Asserted on card-presence changes detected via PRES/PRES and on faults (e.g. CVCC overload). Open-drain-like output with an ~50 kΩ pull-up (available with metal-change option). |+| 18 | CLKIN | input | External clock input to the internal clock divider (up to 27 MHz). Divider ratio (1/1, 1/2, 1/4, 1/8) is selected by CLKDIV1/CLKDIV2 and produces CCLK to the card. |+| 19 | I/Ouc | bidirectional | Host-side bidirectional I/O corresponding to card CI/O. Level-translated between the microcontroller (VDD domain) and the smart card (CVCC domain). Built-in ~11 kΩ pull-up provides high-impedance state. |+| 20 | AUX1uc | bidirectional | Host-side bidirectional auxiliary line corresponding to card CAUX1 (C4). Level-translated between the microcontroller (VDD) and the card (CVCC); built-in ~11 kΩ pull-up. |+| 21 | AUX2uc | bidirectional | Host-side bidirectional auxiliary line corresponding to card CAUX2 (C8). Level-translated between the microcontroller (VDD) and the card (CVCC); built-in ~11 kΩ pull-up. |+| 22 | CLKDIV1 | input | Clock-divider select bit 1. Combined with CLKDIV2 programs CCLK = CLKIN divided by 1, 1/2, 1/4 or 1/8 (see clock-division table). |+| 23 | CLKDIV2 | input | Clock-divider select bit 2. Combined with CLKDIV1 programs the CLKIN→CCLK division ratio. |+| 24 | VSEL1 | input | Card VCC voltage-select bit 1. Combined with VSEL0 chooses CVCC = 5 V, 3 V or 1.8 V (VSEL1=High picks the higher level of the mode chosen by VSEL0). |+| 25 | GND | power_in | Exposed thermal pad - regulator (card-side) power-supply ground. Must be soldered to the PCB ground plane for proper electrical operation and thermal dissipation. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | onsemi |+| Package | QFN-24-EP(4x4) |+| Category | Communication Interface Chip/UART/485/232 |+| Pins | 25 |++## Ordering variants++Same part, different packaging or reel option.++- `NCN8026AMNTXG`++## CAD (KiCad official)++- Symbol: `NCN8026AMNTXG`+- Footprint: `Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm`+- 3D model: QFN-24-EP(4x4) (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [onsemi datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588930615567245312) (15 pp, sha256 `c3d6be7a248da33b`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ncn8026amntxg-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "ncn8026amntxg",+  "version": "0.1.0",+  "type": "component",+  "description": "onsemi Interface - Specialized, QFN-24-EP(4x4). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "communication interface chip-uart-485-232",+    "ncn8026amntxg"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "ncn8026amntxg.kicad_sym",+    "ncn8026amntxg.kicad_mod",+    "ncn8026amntxg.glb",+    "ncn8026amntxg.step",+    "ncn8026amntxg.lbr",+    "docs/hero.png",+    "docs/ncn8026amntxg-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file