← Commit history

Initial commit: component/ncn8025amntxg

Ray ·fa83141908 ·
2 files changed +304
README.mdadded+61
@@ -0,0 +1,61 @@+# NCN8025AMNTXG++**onsemi** · Interface - Specialized · QFN-24-EP(4x4)++NCN8025AMNTXG from onsemi, in a QFN-24-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VSEL0 | input | Selects card VCC voltage mode: Low for 5V/3V selection, High for 1.8V/3V selection via VSEL1. |+| 2 | VDDP | power_in | Regulator power supply input for card power generation. |+| 3 | PRES | input | Card presence input for normally-open connector, active low with 8 ms debounce. |+| 4 | PRES | input | Card presence input for normally-closed connector, active high with 8 ms debounce. |+| 5 | CI/O | bidirectional | Bidirectional serial I/O to card C7 with 11 kΩ pull-up to CVCC. |+| 6 | CAUX2 | bidirectional | Bidirectional auxiliary I/O to card C8 with 11 kΩ pull-up to CVCC. |+| 7 | CAUX1 | bidirectional | Bidirectional auxiliary I/O to card C4 with 11 kΩ pull-up to CVCC. |+| 8 | GND | power_in | Card ground connection. |+| 9 | CCLK | output | Clock output to card C3, derived from CLKIN through clock dividers. |+| 10 | CRST | output | Reset output to card C2, controlled by RSTIN through level shifter. |+| 11 | CVCC | power_out | Regulated card power supply output, programmable 1.8V/3.0V/5.0V at up to 70 mA. |+| 12 | CMDVCC | input | Activation sequence control input, active low to enable card interface. |+| 13 | PORADJ | input | VDD UVLO threshold adjustment input via external resistor divider; connect to ground when unused. |+| 14 | RSTIN | input | Reset input from microcontroller at VDD level, translated to card reset voltage. |+| 15 | VDD | power_in | Microcontroller power supply input 2.7V-5.5V, requires 0.1 μF decoupling capacitor. |+| 16 | GND | power_in | Ground connection. |+| 17 | INT | output | Interrupt output, active low when card present or CVCC overloaded. |+| 18 | CLKIN | input | External clock input, 27 MHz maximum frequency. |+| 19 | I/Ouc | bidirectional | Bidirectional serial I/O to microcontroller with 11 kΩ pull-up. |+| 20 | AUX1uc | bidirectional | Bidirectional auxiliary C4 signal adapter to microcontroller with 11 kΩ pull-up. |+| 21 | AUX2uc | bidirectional | Bidirectional auxiliary C8 signal adapter to microcontroller with 11 kΩ pull-up. |+| 22 | CLKDIV1 | input | Clock frequency division ratio control with CLKDIV2 for ÷1, ÷2, ÷4, ÷8 selection. |+| 23 | CLKDIV2 | input | Clock frequency division ratio control with CLKDIV1 for ÷1, ÷2, ÷4, ÷8 selection. |+| 24 | VSEL1 | input | Card VCC voltage selection with VSEL0 for 1.8V/3.0V/5.0V output. |+| 25 | GND | power_in | Regulator power supply ground and exposed pad connection to PCB. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | onsemi |+| Package | QFN-24-EP(4x4) |+| Category | Interface |+| Pins | 25 |++## CAD (KiCad official)++- Symbol: `NCN8025AMNTXG`+- Footprint: `Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm`+- 3D model: QFN-24-EP(4x4) (KiCad packages3D, STEP)+- 3D model files: `ncn8025amntxg-etched.step` / `ncn8025amntxg-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ncn8025amntxg.step` / `ncn8025amntxg.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [onsemi datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586183287312158720) (15 pp, sha256 `c26d5c0564f47926`, retrieved 2026-09-18, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ncn8025amntxg-datasheet.pdf)
page.jsonadded+243
@@ -0,0 +1,243 @@+{+  "slug": "ncn8025amntxg",+  "version": "0.1.0",+  "type": "component",+  "description": "onsemi Interface - Specialized, QFN-24-EP(4x4). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "interface",+    "ncn8025amntxg",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "ncn8025amntxg.kicad_sym",+    "ncn8025amntxg.kicad_mod",+    "ncn8025amntxg.glb",+    "ncn8025amntxg.step",+    "ncn8025amntxg.lbr",+    "docs/hero.png",+    "docs/ncn8025amntxg-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "NCN8025AMNTXG",+    "manufacturer": "onsemi",+    "package": "QFN-24-EP(4x4)",+    "pin_count": 25,+    "category": "Interface",+    "subcategory": "Interface - Specialized",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586183287312158720",+    "parts": {+      "symbol": "ncn8025amntxg.kicad_sym",+      "footprint": "ncn8025amntxg.kicad_mod",+      "model_3d": "ncn8025amntxg-etched.glb",+      "model_3d_plain": "ncn8025amntxg.glb",+      "model_3d_step": "ncn8025amntxg-etched.step",+      "model_3d_step_plain": "ncn8025amntxg.step",+      "lbr": "ncn8025amntxg.lbr"+    },+    "distributor_links": {+      "lcsc": "C122672"+    },+    "pins": [+      {+        "number": "1",+        "name": "VSEL0",+        "type": "input",+        "description": "Selects card VCC voltage mode: Low for 5V/3V selection, High for 1.8V/3V selection via VSEL1."+      },+      {+        "number": "2",+        "name": "VDDP",+        "type": "power_in",+        "description": "Regulator power supply input for card power generation."+      },+      {+        "number": "3",+        "name": "PRES",+        "type": "input",+        "description": "Card presence input for normally-open connector, active low with 8 ms debounce."+      },+      {+        "number": "4",+        "name": "PRES",+        "type": "input",+        "description": "Card presence input for normally-closed connector, active high with 8 ms debounce."+      },+      {+        "number": "5",+        "name": "CI/O",+        "type": "bidirectional",+        "description": "Bidirectional serial I/O to card C7 with 11 kΩ pull-up to CVCC."+      },+      {+        "number": "6",+        "name": "CAUX2",+        "type": "bidirectional",+        "description": "Bidirectional auxiliary I/O to card C8 with 11 kΩ pull-up to CVCC."+      },+      {+        "number": "7",+        "name": "CAUX1",+        "type": "bidirectional",+        "description": "Bidirectional auxiliary I/O to card C4 with 11 kΩ pull-up to CVCC."+      },+      {+        "number": "8",+        "name": "GND",+        "type": "power_in",+        "description": "Card ground connection."+      },+      {+        "number": "9",+        "name": "CCLK",+        "type": "output",+        "description": "Clock output to card C3, derived from CLKIN through clock dividers."+      },+      {+        "number": "10",+        "name": "CRST",+        "type": "output",+        "description": "Reset output to card C2, controlled by RSTIN through level shifter."+      },+      {+        "number": "11",+        "name": "CVCC",+        "type": "power_out",+        "description": "Regulated card power supply output, programmable 1.8V/3.0V/5.0V at up to 70 mA."+      },+      {+        "number": "12",+        "name": "CMDVCC",+        "type": "input",+        "description": "Activation sequence control input, active low to enable card interface."+      },+      {+        "number": "13",+        "name": "PORADJ",+        "type": "input",+        "description": "VDD UVLO threshold adjustment input via external resistor divider; connect to ground when unused."+      },+      {+        "number": "14",+        "name": "RSTIN",+        "type": "input",+        "description": "Reset input from microcontroller at VDD level, translated to card reset voltage."+      },+      {+        "number": "15",+        "name": "VDD",+        "type": "power_in",+        "description": "Microcontroller power supply input 2.7V-5.5V, requires 0.1 μF decoupling capacitor."+      },+      {+        "number": "16",+        "name": "GND",+        "type": "power_in",+        "description": "Ground connection."+      },+      {+        "number": "17",+        "name": "INT",+        "type": "output",+        "description": "Interrupt output, active low when card present or CVCC overloaded."+      },+      {+        "number": "18",+        "name": "CLKIN",+        "type": "input",+        "description": "External clock input, 27 MHz maximum frequency."+      },+      {+        "number": "19",+        "name": "I/Ouc",+        "type": "bidirectional",+        "description": "Bidirectional serial I/O to microcontroller with 11 kΩ pull-up."+      },+      {+        "number": "20",+        "name": "AUX1uc",+        "type": "bidirectional",+        "description": "Bidirectional auxiliary C4 signal adapter to microcontroller with 11 kΩ pull-up."+      },+      {+        "number": "21",+        "name": "AUX2uc",+        "type": "bidirectional",+        "description": "Bidirectional auxiliary C8 signal adapter to microcontroller with 11 kΩ pull-up."+      },+      {+        "number": "22",+        "name": "CLKDIV1",+        "type": "input",+        "description": "Clock frequency division ratio control with CLKDIV2 for ÷1, ÷2, ÷4, ÷8 selection."+      },+      {+        "number": "23",+        "name": "CLKDIV2",+        "type": "input",+        "description": "Clock frequency division ratio control with CLKDIV1 for ÷1, ÷2, ÷4, ÷8 selection."+      },+      {+        "number": "24",+        "name": "VSEL1",+        "type": "input",+        "description": "Card VCC voltage selection with VSEL0 for 1.8V/3.0V/5.0V output."+      },+      {+        "number": "25",+        "name": "GND",+        "type": "power_in",+        "description": "Regulator power supply ground and exposed pad connection to PCB."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 15,+        "cost_usd": 0.3481,+        "at": "2026-09-18T01:00:51"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586183287312158720",+        "pages": 15,+        "sha256": "c26d5c0564f47926",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 25,+        "described": 25,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file