← Commit history

ncl30488a2dr2g: restore the component block (pinout + model declarations) from this page's own README and symbol

Ray ·ea23765691 · ·parent 6ae2a0d
1 file changed +74−1
page.json+74−1
@@ -33,5 +33,78 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "NCL30488A2DR2G",+    "manufacturer": "onsemi",+    "package": "SOIC-7",+    "pin_count": 8,+    "category": "LED Drivers",+    "parts": {+      "symbol": "ncl30488a2dr2g.kicad_sym",+      "footprint": "ncl30488a2dr2g.kicad_mod",+      "model_3d": "ncl30488a2dr2g-etched.glb",+      "model_3d_plain": "ncl30488a2dr2g.glb",+      "model_3d_step": "ncl30488a2dr2g-etched.step",+      "model_3d_step_plain": "ncl30488a2dr2g.step",+      "lbr": "ncl30488a2dr2g.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "COMP",+        "type": "output",+        "description": "OTA output for the CV loop. External compensation network (R1, C1, C2 type-2 compensator) attached here stabilizes the constant-voltage regulation loop. Clamped between VCV(clampL) ~0.6 V and VCV(clampH) ~4.12 V; internal divider KCOMP=4 maps VCOMP to VREFX."+      },+      {+        "number": "2",+        "name": "ZCD",+        "type": "input",+        "description": "Zero-crossing detection / Vaux sensing pin. Connects to the auxiliary winding via a resistor divider to detect core reset (valley) events and to sense the auxiliary-winding voltage for accurate primary-side output voltage regulation. Thresholds: VZCD(rising)~90 mV, VZCD(falling)~55 mV; 200 kΩ internal pull-down."+      },+      {+        "number": "3",+        "name": "CS",+        "type": "input",+        "description": "Primary peak current sense input. Monitors the voltage across the primary-side current-sense resistor for cycle-by-cycle peak current limiting (VILIM ~1.4 V) and winding/output-diode short-circuit detection (VCS(stop) ~2.0 V, 140% of VILIM). Leading-edge blanking tLEB ~345 ns."+      },+      {+        "number": "4",+        "name": "GND",+        "type": "power_in",+        "description": "Controller ground reference. Return for VCC supply current and reference for all pin voltages. Non-connection is detected via CS-pin ESD diode monitoring (200 µs fault window)."+      },+      {+        "number": "5",+        "name": "DRV",+        "type": "output",+        "description": "Gate driver output to the external power MOSFET. Clamped to VDRV(high) ~12 V (10-14 V) when VCC is high, otherwise follows VCC. Drive capability ~500 mA sink / 300 mA source; RSNK ~13 Ω, RSRC ~30 Ω; tr ~30 ns / tf ~20 ns (CDRV=470 pF)."+      },+      {+        "number": "6",+        "name": "VCC",+        "type": "power_in",+        "description": "Controller supply pin, fed from an external auxiliary winding once running. Startup VCC(on) ~18 V, UVLO VCC(off) ~10.2 V, VCC(OVP) ~26.5 V, absolute max 30 V. Operating current: ~1.35 mA disabled, ~3.0-3.5 mA switching at 65 kHz."+      },+      {+        "number": "7",+        "name": "NC",+        "type": "unconnected",+        "description": "No connect; pin removed for high-voltage creepage between the HV pin (pin 8) and the low-voltage pins. Package is a SOIC-7 (SOIC-8 body with pin 7 omitted)."+      },+      {+        "number": "8",+        "name": "HV",+        "type": "input",+        "description": "High-voltage sensing / startup pin. Connects after the diode bridge (up to 700 V absolute max) to provide the internal high-voltage startup current source (IHV(start1) ~300 µA, IHV(start2) ~5.1 mA) and to sense the rectified line for PFC shaping, brown-out (~108 V on / ~98 V off), and line OVP (~469 V trip, ~443 V reset)."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}