← Commit history
page.json+174−8@@ -1,13 +1,184 @@ {+ "schema_version": 1,+ "type": "component", "slug": "ncl30125b2dr2g",+ "title": "NCL30125B2DR2G",+ "brief": "onsemi LED Drivers, SOIC-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "version": "0.1.0",- "type": "component",- "description": "onsemi LED Drivers, SOIC-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "license": "CC-BY-SA-4.0", "tags": [ "component", "led drivers", "ncl30125b2dr2g" ],+ "component": {+ "mpn": "NCL30125B2DR2G",+ "manufacturer": "onsemi",+ "package": "SOIC-16",+ "pin_count": 16,+ "category": "LED Drivers",+ "subcategory": "LED Drivers",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589998475783147520",+ "parts": {+ "symbol": "ncl30125b2dr2g.kicad_sym",+ "footprint": "ncl30125b2dr2g.kicad_mod",+ "model_3d": "ncl30125b2dr2g.glb",+ "model_3d_step": "ncl30125b2dr2g.step",+ "lbr": "ncl30125b2dr2g.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "HV",+ "type": "power_in",+ "description": "High-voltage startup pin (up to 700 V abs max). Connected to the rectified AC line or bulk rail through diodes/resistors to power the internal current source that charges the Vcc capacitor at startup (~11 mA typ) and supports Dynamic Self-Supply (DSS)."+ },+ {+ "number": "2",+ "name": "NC",+ "type": "unconnected",+ "description": "No connect. Pin position is omitted from the SOIC-16 package for improved creepage between the HV pin (pin 1) and the Fault pin (pin 3)."+ },+ {+ "number": "3",+ "name": "Fault",+ "type": "input",+ "description": "Combined latching OVP/OTP fault input. Controller latches off if VFault is pulled above VFault(OVP) = 2.5 V typ or below VFault(OTP) = 0.4 V typ. Provides a 50 uA pull-up current source (100 uA boosted during startup blanking) suitable for direct interface with an NTC thermistor."+ },+ {+ "number": "4",+ "name": "BO",+ "type": "input",+ "description": "Brown-out and line-OVP sense input. Monitors a scaled version of the bulk/input voltage through a resistor divider. Controller starts pulsing when VBO > 0.80 V typ and stops after a 50 ms filter when VBO < 0.70 V typ; also provides a line-OVP shutdown above 2.9 V typ."+ },+ {+ "number": "5",+ "name": "FB",+ "type": "input",+ "description": "Feedback input from the secondary-side regulation loop, typically driven by an optocoupler collector. Internally pulled up to VFB(ref) ~4.3 V through 11.6 kOhm. VFB is divided by KFB = 4 to set the peak current setpoint; skip mode is entered below Vskip = 0.3 V."+ },+ {+ "number": "6",+ "name": "RT",+ "type": "input",+ "description": "Switching-frequency programming pin. A resistor to GND sets fSW between 50 kHz and 300 kHz (e.g. 200 kOhm -> 51 kHz, 100 kOhm -> 100 kHz, 32 kOhm -> 300 kHz). RRT = (1/fSW - 120 ns) * 1e10."+ },+ {+ "number": "7",+ "name": "SS",+ "type": "output",+ "description": "Soft-start programming pin. External capacitor to GND is charged by an internal 5.2 uA current source; SS voltage divided by 4 clamps the CS peak-current setpoint until it reaches VSS = 2.0 V typ. Internally discharged on fault (OCP, UVLO, BO)."+ },+ {+ "number": "8",+ "name": "FW",+ "type": "output",+ "description": "Auxiliary gate-drive output for the bootstrap-refresh MOSFET (M3). Used to refresh the bootstrap capacitor during startup (tboot(start) ~ 200 us) and during skip mode. Peak +100 mA / -200 mA drive; clamped at ~12.7 V; max continuous current in high state limited to 10 mA."+ },+ {+ "number": "9",+ "name": "CS",+ "type": "input",+ "description": "Primary current-sense input. Sets peak current via VILimit = 0.5 V typ, with a 2nd OCP threshold VCS(stop) = 0.75 V typ for abnormal overcurrent. Adaptive LEB (200-300 ns) and a 60 uA startup pull-up for open-pin detection. Also used to inject internal ramp compensation via internal 26.5 kOhm."+ },+ {+ "number": "10",+ "name": "Vcc",+ "type": "power_in",+ "description": "Primary controller supply. VCC(on) = 16 V typ, VCC(min) = 10 V typ, VCC(off) = 8.8 V typ, absolute maximum 35 V. An internal OVP comparator trips at Vcc(OVP) = 25.9 V typ with 20 us blanking to protect against optocoupler faults."+ },+ {+ "number": "11",+ "name": "GND",+ "type": "power_in",+ "description": "Controller ground return for all low-voltage circuitry and the DRV_LO/FW driver return path."+ },+ {+ "number": "12",+ "name": "DRV_LO",+ "type": "output",+ "description": "Low-side MOSFET gate driver output. Peak +0.9 A / -1.2 A source/sink; ~13.5 V active clamp (16 V max) to protect the external MOSFET gate. 13 ns typ rise/fall into 1 nF."+ },+ {+ "number": "13",+ "name": "NC",+ "type": "unconnected",+ "description": "No connect. Pin position is omitted from the SOIC-16 package for improved creepage between DRV_LO (pin 12) and DRV_HI (pin 14)."+ },+ {+ "number": "14",+ "name": "DRV_HI",+ "type": "output",+ "description": "High-side MOSFET gate driver output. Referenced to the HB pin and powered from Boot (floating bootstrap supply). Peak +0.9 A / -1.2 A source/sink; upper UVLO ensures adequate VGS before switching."+ },+ {+ "number": "15",+ "name": "HB",+ "type": "passive",+ "description": "Half-bridge switching-node return for the high-side driver. Connects to the source of the high-side MOSFET / drain of the low-side MOSFET; serves as reference for DRV_HI and Boot. VBoot - VHB must not exceed 20 V."+ },+ {+ "number": "16",+ "name": "Boot",+ "type": "power_in",+ "description": "Floating bootstrap supply for the high-side driver. External bootstrap capacitor tied between Boot and HB is refreshed via an external diode from Vcc and/or through the FW-driven refresh MOSFET. VBoot(on) = 8.5 V typ, VBoot(off) = 7.9 V typ, absolute max 620 V referenced to GND."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589998475783147520",+ "pages": null,+ "sha256": "7c36d2268817fc90",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 16,+ "described": 16,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "metadata": {+ "specs": {+ "Manufacturer": "onsemi",+ "Package": "SOIC-16",+ "Category": "LED Drivers",+ "Pins": "16"+ }+ },+ "variants": [+ {+ "mpn": "NCL30125B2DR2GA2DR2G",+ "kind": "packaging"+ },+ {+ "mpn": "NCL30125B2DR2G",+ "kind": "packaging"+ }+ ],+ "sections": [+ "hero",+ "viewers",+ "readme",+ "breadcrumbs",+ "info"+ ],+ "discovery_triggers": [+ "ncl30125b2dr2g"+ ],+ "discovery_pitch": "NCL30125B2DR2G (onsemi) component page with datasheet-verified CAD.",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }, "dependencies": {}, "hero": { "type": "image",@@ -25,10 +196,5 @@ "docs/ncl30125b2dr2g-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": "public",- "author": {- "name": "Ray",- "email": "[email protected]"- }+ ] }