← Commit history
README.mdadded+66@@ -0,0 +1,66 @@+# NCA9555PWJ++**Nexperia** · I/O Expanders · TSSOP-24++NCA9555PWJ from Nexperia, in a TSSOP-24. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | INT | output | Open-drain active LOW interrupt output. Connect to VCC through a pull-up resistor. Asserted when any GPIO configured as input changes from its corresponding Input port register state. |+| 2 | A1 | input | Hardware address input 1. Connect directly to VCC or GND to set one of the eight possible I2C slave addresses. |+| 3 | A2 | input | Hardware address input 2. Connect directly to VCC or GND to set one of the eight possible I2C slave addresses. |+| 4 | P0_0 | bidirectional | Parallel port I/O bit 0 of port 0. Push-pull driver; can source or sink up to 25 mA. Powers up as a high-impedance input. |+| 5 | P0_1 | bidirectional | Parallel port I/O bit 1 of port 0. Push-pull driver; powers up as a high-impedance input. |+| 6 | P0_2 | bidirectional | Parallel port I/O bit 2 of port 0. Push-pull driver; powers up as a high-impedance input. |+| 7 | P0_3 | bidirectional | Parallel port I/O bit 3 of port 0. Push-pull driver; powers up as a high-impedance input. |+| 8 | P0_4 | bidirectional | Parallel port I/O bit 4 of port 0. Push-pull driver; powers up as a high-impedance input. |+| 9 | P0_5 | bidirectional | Parallel port I/O bit 5 of port 0. Push-pull driver; powers up as a high-impedance input. |+| 10 | P0_6 | bidirectional | Parallel port I/O bit 6 of port 0. Push-pull driver; powers up as a high-impedance input. |+| 11 | P0_7 | bidirectional | Parallel port I/O bit 7 of port 0. Push-pull driver; powers up as a high-impedance input. |+| 12 | GND | power_in | Ground reference for the device. |+| 13 | P1_0 | bidirectional | Parallel port I/O bit 0 of port 1. Push-pull driver; powers up as a high-impedance input. |+| 14 | P1_1 | bidirectional | Parallel port I/O bit 1 of port 1. Push-pull driver; powers up as a high-impedance input. |+| 15 | P1_2 | bidirectional | Parallel port I/O bit 2 of port 1. Push-pull driver; powers up as a high-impedance input. |+| 16 | P1_3 | bidirectional | Parallel port I/O bit 3 of port 1. Push-pull driver; powers up as a high-impedance input. |+| 17 | P1_4 | bidirectional | Parallel port I/O bit 4 of port 1. Push-pull driver; powers up as a high-impedance input. |+| 18 | P1_5 | bidirectional | Parallel port I/O bit 5 of port 1. Push-pull driver; powers up as a high-impedance input. |+| 19 | P1_6 | bidirectional | Parallel port I/O bit 6 of port 1. Push-pull driver; powers up as a high-impedance input. |+| 20 | P1_7 | bidirectional | Parallel port I/O bit 7 of port 1. Push-pull driver; powers up as a high-impedance input. |+| 21 | A0 | input | Hardware address input 0. Connect directly to VCC or GND to set one of the eight possible I2C slave addresses. |+| 22 | SCL | input | I2C serial clock input. Connect to VCC through a pull-up resistor. Supports 400 kHz Fast-mode I2C. |+| 23 | SDA | bidirectional | I2C serial data line. Open-drain; connect to VCC through a pull-up resistor. |+| 24 | VCC | power_in | Supply voltage. Operating range 1.65 V to 5.5 V. Bypass with a decoupling capacitor to GND close to the pin. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Nexperia |+| Package | TSSOP-24 |+| Category | Interface |+| Pins | 24 |++## Ordering variants++Same part, different packaging or reel option.++- `NCA9555PWJ`+- `NCA9555PWJBY`++## CAD (KiCad official)++- Symbol: `NCA9555PWJ`+- Footprint: `Package_SO:TSSOP-24_4.4x7.8mm_P0.65mm`+- 3D model: TSSOP-24 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Nexperia datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8600520057474723840) (31 pp, sha256 `b519b13925fcf8be`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/nca9555pwj-datasheet.pdf)
page.jsonadded+34@@ -0,0 +1,34 @@+{+ "slug": "nca9555pwj",+ "version": "0.1.0",+ "type": "component",+ "description": "Nexperia I/O Expanders, TSSOP-24. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "interface",+ "nca9555pwj"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "nca9555pwj.kicad_sym",+ "nca9555pwj.kicad_mod",+ "nca9555pwj.glb",+ "nca9555pwj.step",+ "nca9555pwj.lbr",+ "docs/hero.png",+ "docs/nca9555pwj-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "visibility": "public",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}