← Commit history

Initial commit: component/nca9535pw-q100j

Ray ·c79d7d8c4b ·
2 files changed +297
README.mdadded+60
@@ -0,0 +1,60 @@+# NCA9535PW-Q100J++**Nexperia** · I/O Expanders · TSSOP-24++NCA9535PW-Q100J from Nexperia, in a TSSOP-24. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | INT | tri_state | Interrupt output, open-drain active LOW asserted when any GPIO changes from its corresponding input port register state; connect to VCC through pull-up resistor |+| 2 | A1 | input | Address input 1; connect directly to VCC or GND to configure I²C slave address |+| 3 | A2 | input | Address input 2; connect directly to VCC or GND to configure I²C slave address |+| 4 | P0_0 | bidirectional | Parallel port I/O with push-pull driver; powers up as high-impedance input; configurable as input or output via configuration register |+| 5 | P0_1 | bidirectional | Parallel port I/O with push-pull driver; powers up as high-impedance input; configurable as input or output via configuration register |+| 6 | P0_2 | bidirectional | Parallel port I/O with push-pull driver; powers up as high-impedance input; configurable as input or output via configuration register |+| 7 | P0_3 | bidirectional | Parallel port I/O with push-pull driver; powers up as high-impedance input; configurable as input or output via configuration register |+| 8 | P0_4 | bidirectional | Parallel port I/O with push-pull driver; powers up as high-impedance input; configurable as input or output via configuration register |+| 9 | P0_5 | bidirectional | Parallel port I/O with push-pull driver; powers up as high-impedance input; configurable as input or output via configuration register |+| 10 | P0_6 | bidirectional | Parallel port I/O with push-pull driver; powers up as high-impedance input; configurable as input or output via configuration register |+| 11 | P0_7 | bidirectional | Parallel port I/O with push-pull driver; powers up as high-impedance input; configurable as input or output via configuration register |+| 12 | GND | power_in | Ground, 0 V reference |+| 13 | P1_0 | bidirectional | Parallel port I/O with push-pull driver; powers up as high-impedance input; configurable as input or output via configuration register |+| 14 | P1_1 | bidirectional | Parallel port I/O with push-pull driver; powers up as high-impedance input; configurable as input or output via configuration register |+| 15 | P1_2 | bidirectional | Parallel port I/O with push-pull driver; powers up as high-impedance input; configurable as input or output via configuration register |+| 16 | P1_3 | bidirectional | Parallel port I/O with push-pull driver; powers up as high-impedance input; configurable as input or output via configuration register |+| 17 | P1_4 | bidirectional | Parallel port I/O with push-pull driver; powers up as high-impedance input; configurable as input or output via configuration register |+| 18 | P1_5 | bidirectional | Parallel port I/O with push-pull driver; powers up as high-impedance input; configurable as input or output via configuration register |+| 19 | P1_6 | bidirectional | Parallel port I/O with push-pull driver; powers up as high-impedance input; configurable as input or output via configuration register |+| 20 | P1_7 | bidirectional | Parallel port I/O with push-pull driver; powers up as high-impedance input; configurable as input or output via configuration register |+| 21 | A0 | input | Address input 0; connect directly to VCC or GND to configure I²C slave address |+| 22 | SCL | input | I²C serial clock input with Schmitt-trigger; 400 kHz Fast-mode; connect to VCC through pull-up resistor |+| 23 | SDA | bidirectional | I²C serial data bus with open-drain and Schmitt-trigger; connect to VCC through pull-up resistor |+| 24 | VCC | power_in | Supply voltage; operating range 1.65 V to 5.5 V |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Nexperia |+| Package | TSSOP-24 |+| Category | Interface |+| Pins | 24 |++## CAD (KiCad official)++- Symbol: `NCA9535PW-Q100J`+- Footprint: `Package_SO:TSSOP-24_4.4x7.8mm_P0.65mm`+- 3D model: TSSOP-24 (KiCad packages3D, STEP)+- 3D model files: `nca9535pw-q100j-etched.step` / `nca9535pw-q100j-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `nca9535pw-q100j.step` / `nca9535pw-q100j.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Nexperia datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8604338626206068736) (30 pp, sha256 `3652330f1d47e63b`, retrieved 2026-09-22, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/nca9535pw-q100j-datasheet.pdf)
page.jsonadded+237
@@ -0,0 +1,237 @@+{+  "slug": "nca9535pw-q100j",+  "version": "0.1.0",+  "type": "component",+  "description": "Nexperia I/O Expanders, TSSOP-24. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "interface",+    "nca9535pw-q100j",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "nca9535pw-q100j.kicad_sym",+    "nca9535pw-q100j.kicad_mod",+    "nca9535pw-q100j.glb",+    "nca9535pw-q100j.step",+    "nca9535pw-q100j.lbr",+    "docs/hero.png",+    "docs/nca9535pw-q100j-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "NCA9535PW-Q100J",+    "manufacturer": "Nexperia",+    "package": "TSSOP-24",+    "pin_count": 24,+    "category": "Interface",+    "subcategory": "I/O Expanders",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8604338626206068736",+    "parts": {+      "symbol": "nca9535pw-q100j.kicad_sym",+      "footprint": "nca9535pw-q100j.kicad_mod",+      "model_3d": "nca9535pw-q100j-etched.glb",+      "model_3d_plain": "nca9535pw-q100j.glb",+      "model_3d_step": "nca9535pw-q100j-etched.step",+      "model_3d_step_plain": "nca9535pw-q100j.step",+      "lbr": "nca9535pw-q100j.lbr"+    },+    "distributor_links": {+      "lcsc": "C20235688"+    },+    "pins": [+      {+        "number": "1",+        "name": "INT",+        "type": "tri_state",+        "description": "Interrupt output, open-drain active LOW asserted when any GPIO changes from its corresponding input port register state; connect to VCC through pull-up resistor"+      },+      {+        "number": "2",+        "name": "A1",+        "type": "input",+        "description": "Address input 1; connect directly to VCC or GND to configure I²C slave address"+      },+      {+        "number": "3",+        "name": "A2",+        "type": "input",+        "description": "Address input 2; connect directly to VCC or GND to configure I²C slave address"+      },+      {+        "number": "4",+        "name": "P0_0",+        "type": "bidirectional",+        "description": "Parallel port I/O with push-pull driver; powers up as high-impedance input; configurable as input or output via configuration register"+      },+      {+        "number": "5",+        "name": "P0_1",+        "type": "bidirectional",+        "description": "Parallel port I/O with push-pull driver; powers up as high-impedance input; configurable as input or output via configuration register"+      },+      {+        "number": "6",+        "name": "P0_2",+        "type": "bidirectional",+        "description": "Parallel port I/O with push-pull driver; powers up as high-impedance input; configurable as input or output via configuration register"+      },+      {+        "number": "7",+        "name": "P0_3",+        "type": "bidirectional",+        "description": "Parallel port I/O with push-pull driver; powers up as high-impedance input; configurable as input or output via configuration register"+      },+      {+        "number": "8",+        "name": "P0_4",+        "type": "bidirectional",+        "description": "Parallel port I/O with push-pull driver; powers up as high-impedance input; configurable as input or output via configuration register"+      },+      {+        "number": "9",+        "name": "P0_5",+        "type": "bidirectional",+        "description": "Parallel port I/O with push-pull driver; powers up as high-impedance input; configurable as input or output via configuration register"+      },+      {+        "number": "10",+        "name": "P0_6",+        "type": "bidirectional",+        "description": "Parallel port I/O with push-pull driver; powers up as high-impedance input; configurable as input or output via configuration register"+      },+      {+        "number": "11",+        "name": "P0_7",+        "type": "bidirectional",+        "description": "Parallel port I/O with push-pull driver; powers up as high-impedance input; configurable as input or output via configuration register"+      },+      {+        "number": "12",+        "name": "GND",+        "type": "power_in",+        "description": "Ground, 0 V reference"+      },+      {+        "number": "13",+        "name": "P1_0",+        "type": "bidirectional",+        "description": "Parallel port I/O with push-pull driver; powers up as high-impedance input; configurable as input or output via configuration register"+      },+      {+        "number": "14",+        "name": "P1_1",+        "type": "bidirectional",+        "description": "Parallel port I/O with push-pull driver; powers up as high-impedance input; configurable as input or output via configuration register"+      },+      {+        "number": "15",+        "name": "P1_2",+        "type": "bidirectional",+        "description": "Parallel port I/O with push-pull driver; powers up as high-impedance input; configurable as input or output via configuration register"+      },+      {+        "number": "16",+        "name": "P1_3",+        "type": "bidirectional",+        "description": "Parallel port I/O with push-pull driver; powers up as high-impedance input; configurable as input or output via configuration register"+      },+      {+        "number": "17",+        "name": "P1_4",+        "type": "bidirectional",+        "description": "Parallel port I/O with push-pull driver; powers up as high-impedance input; configurable as input or output via configuration register"+      },+      {+        "number": "18",+        "name": "P1_5",+        "type": "bidirectional",+        "description": "Parallel port I/O with push-pull driver; powers up as high-impedance input; configurable as input or output via configuration register"+      },+      {+        "number": "19",+        "name": "P1_6",+        "type": "bidirectional",+        "description": "Parallel port I/O with push-pull driver; powers up as high-impedance input; configurable as input or output via configuration register"+      },+      {+        "number": "20",+        "name": "P1_7",+        "type": "bidirectional",+        "description": "Parallel port I/O with push-pull driver; powers up as high-impedance input; configurable as input or output via configuration register"+      },+      {+        "number": "21",+        "name": "A0",+        "type": "input",+        "description": "Address input 0; connect directly to VCC or GND to configure I²C slave address"+      },+      {+        "number": "22",+        "name": "SCL",+        "type": "input",+        "description": "I²C serial clock input with Schmitt-trigger; 400 kHz Fast-mode; connect to VCC through pull-up resistor"+      },+      {+        "number": "23",+        "name": "SDA",+        "type": "bidirectional",+        "description": "I²C serial data bus with open-drain and Schmitt-trigger; connect to VCC through pull-up resistor"+      },+      {+        "number": "24",+        "name": "VCC",+        "type": "power_in",+        "description": "Supply voltage; operating range 1.65 V to 5.5 V"+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 30,+        "cost_usd": 0.318,+        "at": "2026-09-22T11:37:25"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8604338626206068736",+        "pages": 30,+        "sha256": "3652330f1d47e63b",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 24,+        "described": 24,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file