← Commit history
nc7wz07p6x: factory component page (tier=mfr)
3 files changed
+20−17
README.md+5−5@@ -8,12 +8,12 @@ NC7WZ07P6X from onsemi, in a SOT-363-6. Pinout and pin descriptions extracted fr | Pin | Name | Type | Function | |---|---|---|---|-| 1 | A1 | input | Buffer 1 logic input. CMOS input, VIH ≥ 0.70·VCC, VIL ≤ 0.30·VCC (at VCC 2.30-5.50 V). Tolerates input voltages up to 7 V independent of VCC. |+| 1 | A1 | input | Buffer 1 input. Over-voltage tolerant up to 7 V independent of VCC operating voltage. Must be held HIGH or LOW when unused (may not float). | | 2 | GND | power_in | Ground reference (0 V) for the device. |-| 3 | A2 | input | Buffer 2 logic input. CMOS input, VIH ≥ 0.70·VCC, VIL ≤ 0.30·VCC (at VCC 2.30-5.50 V). Tolerates input voltages up to 7 V independent of VCC. |-| 4 | Y2 | output | Buffer 2 open-drain output. Follows A2 in the LOW state; goes to high-impedance when A2 is HIGH (requires an external pull-up). IOL up to 24 mA at 3 V VCC. |-| 5 | VCC | power_in | Positive supply pin. Recommended operating range 1.65 V to 5.50 V; absolute max 7.0 V. Decouple locally to GND. |-| 6 | Y1 | output | Buffer 1 open-drain output. Follows A1 in the LOW state; goes to high-impedance when A1 is HIGH (requires an external pull-up). IOL up to 24 mA at 3 V VCC. |+| 3 | A2 | input | Buffer 2 input. Over-voltage tolerant up to 7 V independent of VCC operating voltage. Must be held HIGH or LOW when unused (may not float). |+| 4 | Y2 | output | Buffer 2 open-drain output. Sinks up to 24 mA (IOL) at 3 V VCC; requires an external pull-up resistor. High-impedance when the corresponding input is HIGH or VCC = 0 V. |+| 5 | VCC | power_in | Supply voltage input. Recommended operating range 1.65 V to 5.5 V (data retention down to 1.5 V); absolute maximum 7 V. Bypass with a local decoupling capacitor to GND. |+| 6 | Y1 | output | Buffer 1 open-drain output. Sinks up to 24 mA (IOL) at 3 V VCC; requires an external pull-up resistor. High-impedance when the corresponding input is HIGH or VCC = 0 V. | ## Key specifications
nc7wz07p6x.lbr+9−3@@ -50,7 +50,7 @@ <layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/> </layers> <library>-<description></description>+<description>onsemi Buffer/Driver/Transceiver, SOT-363-6</description> <packages> <package name="SOT-363_SC-70-6"> <description>6 pads, 2.7 x 1.6 mm. SOT, 6 Pin</description>@@ -84,6 +84,7 @@ </packages> <symbols> <symbol name="NC7WZ07P6X">+ <description>onsemi Buffer/Driver/Transceiver, SOT-363-6</description> <wire x1="-12.7" y1="5.08" x2="12.7" y2="5.08" width="0.254" layer="94"/> <wire x1="12.7" y1="5.08" x2="12.7" y2="-5.08" width="0.254" layer="94"/> <wire x1="12.7" y1="-5.08" x2="-12.7" y2="-5.08" width="0.254" layer="94"/>@@ -100,7 +101,7 @@ </symbols> <devicesets> <deviceset name="NC7WZ07P6X" prefix="U">- <description></description>+ <description>onsemi Buffer/Driver/Transceiver, SOT-363-6</description> <gates> <gate name="G$1" symbol="NC7WZ07P6X" x="0" y="0"/> </gates>@@ -114,7 +115,12 @@ <connect gate="G$1" pin="VCC" pad="5"/> <connect gate="G$1" pin="Y2" pad="4"/> </connects>- <technologies><technology name=""/></technologies>+ <technologies>+ <technology name="">+ <attribute name="MPN" value="NC7WZ07P6X" constant="no"/>+ <attribute name="MANUFACTURER" value="onsemi" constant="no"/>+ </technology>+ </technologies> </device> </devices> </deviceset>
page.json+6−9@@ -32,7 +32,7 @@ "number": "1", "name": "A1", "type": "input",- "description": "Buffer 1 logic input. CMOS input, VIH ≥ 0.70·VCC, VIL ≤ 0.30·VCC (at VCC 2.30-5.50 V). Tolerates input voltages up to 7 V independent of VCC."+ "description": "Buffer 1 input. Over-voltage tolerant up to 7 V independent of VCC operating voltage. Must be held HIGH or LOW when unused (may not float)." }, { "number": "2",@@ -44,25 +44,25 @@ "number": "3", "name": "A2", "type": "input",- "description": "Buffer 2 logic input. CMOS input, VIH ≥ 0.70·VCC, VIL ≤ 0.30·VCC (at VCC 2.30-5.50 V). Tolerates input voltages up to 7 V independent of VCC."+ "description": "Buffer 2 input. Over-voltage tolerant up to 7 V independent of VCC operating voltage. Must be held HIGH or LOW when unused (may not float)." }, { "number": "4", "name": "Y2", "type": "output",- "description": "Buffer 2 open-drain output. Follows A2 in the LOW state; goes to high-impedance when A2 is HIGH (requires an external pull-up). IOL up to 24 mA at 3 V VCC."+ "description": "Buffer 2 open-drain output. Sinks up to 24 mA (IOL) at 3 V VCC; requires an external pull-up resistor. High-impedance when the corresponding input is HIGH or VCC = 0 V." }, { "number": "5", "name": "VCC", "type": "power_in",- "description": "Positive supply pin. Recommended operating range 1.65 V to 5.50 V; absolute max 7.0 V. Decouple locally to GND."+ "description": "Supply voltage input. Recommended operating range 1.65 V to 5.5 V (data retention down to 1.5 V); absolute maximum 7 V. Bypass with a local decoupling capacitor to GND." }, { "number": "6", "name": "Y1", "type": "output",- "description": "Buffer 1 open-drain output. Follows A1 in the LOW state; goes to high-impedance when A1 is HIGH (requires an external pull-up). IOL up to 24 mA at 3 V VCC."+ "description": "Buffer 1 open-drain output. Sinks up to 24 mA (IOL) at 3 V VCC; requires an external pull-up resistor. High-impedance when the corresponding input is HIGH or VCC = 0 V." } ], "provenance": {@@ -126,8 +126,5 @@ "docs/nc7wz07p6x-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": {- "public": true- }+ ] }