component
NAU8814YG
Public Made by Adomby adom
Nuvoton Tech Audio Interface ICs, QFN-24-EP(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
nau8814yg: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
2 files changed
+92−12
package.json+50−10@@ -77,7 +77,7 @@ "number": "5", "name": "VDDB", "type": "power_in",- "description": "Digital buffer power supply voltage input, operating range 1.71V to 3.6V (must be \u2265 VDDC)."+ "description": "Digital buffer power supply voltage input, operating range 1.71V to 3.6V (must be ≥ VDDC)." }, { "number": "6",@@ -143,13 +143,13 @@ "number": "16", "name": "MOUT", "type": "output",- "description": "Single-ended mono line/headphone output capable of driving 16\u03a9 to 32\u03a9 loads or line-level outputs."+ "description": "Single-ended mono line/headphone output capable of driving 16Ω to 32Ω loads or line-level outputs." }, { "number": "17", "name": "SPKOUT+", "type": "output",- "description": "Positive output of differential Bridge-Tied Load speaker driver, capable of 1W output into 8\u03a9 load at 5V supply."+ "description": "Positive output of differential Bridge-Tied Load speaker driver, capable of 1W output into 8Ω load at 5V supply." }, { "number": "18",@@ -161,7 +161,7 @@ "number": "19", "name": "SPKOUT-", "type": "output",- "description": "Negative output of differential Bridge-Tied Load speaker driver, capable of 1W output into 8\u03a9 load at 5V supply."+ "description": "Negative output of differential Bridge-Tied Load speaker driver, capable of 1W output into 8Ω load at 5V supply." }, { "number": "20",@@ -173,25 +173,25 @@ "number": "21", "name": "AUX", "type": "input",- "description": "Single-ended auxiliary input with 20k\u03a9 input impedance, maximum signal level -3dB relative to full scale."+ "description": "Single-ended auxiliary input with 20kΩ input impedance, maximum signal level -3dB relative to full scale." }, { "number": "22", "name": "VREF", "type": "power_in",- "description": "Internal mid-supply reference voltage output (nominally 0.5*VDDA) requiring external 1-10\u00b5F decoupling capacitor."+ "description": "Internal mid-supply reference voltage output (nominally 0.5*VDDA) requiring external 1-10µF decoupling capacitor." }, { "number": "23", "name": "MIC-", "type": "input",- "description": "Differential microphone negative input with programmable gain amplifier, input impedance 1.6k\u03a9 to 75k\u03a9 depending on gain setting."+ "description": "Differential microphone negative input with programmable gain amplifier, input impedance 1.6kΩ to 75kΩ depending on gain setting." }, { "number": "24", "name": "MIC+", "type": "input",- "description": "Differential microphone positive input with programmable gain amplifier, fixed input impedance approximately 94k\u03a9."+ "description": "Differential microphone positive input with programmable gain amplifier, fixed input impedance approximately 94kΩ." }, { "number": "25",@@ -236,6 +236,46 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "nau8814yg.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 4.0,+ 4.0,+ 0.77+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "f7d256794c4147daf24dcae0554fae18510315e565ad1e239b475be7fef80d8b",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "nau8814yg-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 4.0,+ 4.0,+ 0.77+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "bf420c1dd8371795f43a194db029b54a9764fea193b1510ca240ff29a82d579b",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }-}+}
page.json+42−2@@ -221,7 +221,47 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "nau8814yg.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 4.0,+ 4.0,+ 0.77+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "f7d256794c4147daf24dcae0554fae18510315e565ad1e239b475be7fef80d8b",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "nau8814yg-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 4.0,+ 4.0,+ 0.77+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "bf420c1dd8371795f43a194db029b54a9764fea193b1510ca240ff29a82d579b",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }, "metadata": { "specs": {@@ -269,4 +309,4 @@ "public": true }, "updated_at": "2026-09-25T02:45:43.978Z"-}+}