← Commit history

Initial commit: component/nau8814yg

Ray ·b8901f2137 ·
2 files changed +308
README.mdadded+61
@@ -0,0 +1,61 @@+# NAU8814YG++**Nuvoton Tech** · Audio Interface ICs · QFN-24-EP(4x4)++NAU8814YG from Nuvoton Tech, in a QFN-24-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | MICBIAS | output | Microphone bias output supplying low-noise reference voltage with up to 3mA bias current and seven selectable levels from 0.50*VDDA to 0.90*VDDA. |+| 2 | VDDA | power_in | Analog power supply voltage input, operating range 2.5V to 3.6V. |+| 3 | VSSA | power_in | Analog ground reference. |+| 4 | VDDC | power_in | Digital core power supply voltage input, operating range 1.71V to 3.6V. |+| 5 | VDDB | power_in | Digital buffer power supply voltage input, operating range 1.71V to 3.6V (must be ≥ VDDC). |+| 6 | VSSD | power_in | Digital ground reference. |+| 7 | ADCOUT | output | Digital audio data output from ADC supporting Right Justified, Left Justified, I2S, PCM, and PCM Time Slot formats. |+| 8 | DACIN | input | Digital audio data input to DAC supporting Right Justified, Left Justified, I2S, PCM, and PCM Time Slot formats. |+| 9 | FS | bidirectional | Frame Sync input in slave mode or output in master mode, synchronized with audio sample period. |+| 10 | BCLK | bidirectional | Bit Clock input in slave mode or output in master mode, synchronized with digital audio bits. |+| 11 | MCLK | input | Master clock input for PLL reference and audio codec timing, supporting 2.7MHz to 26.0MHz. |+| 12 | CSb/GPIO | bidirectional | SPI chip select (active low) input or configurable general purpose I/O pin for Jack Detect, Temperature Alert, or PLL clock output. |+| 13 | SCLK | input | Serial clock input for SPI or 2-Wire I2C-style control interface timing. |+| 14 | SDIO | bidirectional | Serial data pin for SPI data input or 2-Wire open-drain serial data used for register access and device control. |+| 15 | MODE | input | Interface mode select input sampled at reset, selects 2-Wire (low) or SPI (high) control protocol. |+| 16 | MOUT | output | Single-ended mono line/headphone output capable of driving 16Ω to 32Ω loads or line-level outputs. |+| 17 | SPKOUT+ | output | Positive output of differential Bridge-Tied Load speaker driver, capable of 1W output into 8Ω load at 5V supply. |+| 18 | VSSSPK | power_in | Speaker output ground reference. |+| 19 | SPKOUT- | output | Negative output of differential Bridge-Tied Load speaker driver, capable of 1W output into 8Ω load at 5V supply. |+| 20 | VDDSPK | power_in | Speaker power supply voltage input, operating range 2.5V to 5.5V with boost mode dependent on configuration. |+| 21 | AUX | input | Single-ended auxiliary input with 20kΩ input impedance, maximum signal level -3dB relative to full scale. |+| 22 | VREF | power_in | Internal mid-supply reference voltage output (nominally 0.5*VDDA) requiring external 1-10µF decoupling capacitor. |+| 23 | MIC- | input | Differential microphone negative input with programmable gain amplifier, input impedance 1.6kΩ to 75kΩ depending on gain setting. |+| 24 | MIC+ | input | Differential microphone positive input with programmable gain amplifier, fixed input impedance approximately 94kΩ. |+| 25 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Nuvoton Tech |+| Package | QFN-24-EP(4x4) |+| Category | Interface |+| Pins | 25 |++## CAD (KiCad official)++- Symbol: `NAU8814YG`+- Footprint: `Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm`+- 3D model: QFN-24-EP(4x4) (KiCad packages3D, STEP)+- 3D model files: `nau8814yg-etched.step` / `nau8814yg-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `nau8814yg.step` / `nau8814yg.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Nuvoton Tech datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588881669286219776) (110 pp, sha256 `a8e8cf219826c34f`, retrieved 2026-09-22, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/nau8814yg-datasheet.pdf)
page.jsonadded+247
@@ -0,0 +1,247 @@+{+  "slug": "nau8814yg",+  "version": "0.1.0",+  "type": "component",+  "description": "Nuvoton Tech Audio Interface ICs, QFN-24-EP(4x4). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "interface",+    "nau8814yg",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "nau8814yg.kicad_sym",+    "nau8814yg.kicad_mod",+    "nau8814yg.glb",+    "nau8814yg.step",+    "nau8814yg.lbr",+    "docs/hero.png",+    "docs/nau8814yg-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "NAU8814YG",+    "manufacturer": "Nuvoton Tech",+    "package": "QFN-24-EP(4x4)",+    "pin_count": 25,+    "category": "Interface",+    "subcategory": "Audio Interface ICs",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588881669286219776",+    "parts": {+      "symbol": "nau8814yg.kicad_sym",+      "footprint": "nau8814yg.kicad_mod",+      "model_3d": "nau8814yg-etched.glb",+      "model_3d_plain": "nau8814yg.glb",+      "model_3d_step": "nau8814yg-etched.step",+      "model_3d_step_plain": "nau8814yg.step",+      "lbr": "nau8814yg.lbr"+    },+    "distributor_links": {+      "lcsc": "C94774"+    },+    "pins": [+      {+        "number": "1",+        "name": "MICBIAS",+        "type": "output",+        "description": "Microphone bias output supplying low-noise reference voltage with up to 3mA bias current and seven selectable levels from 0.50*VDDA to 0.90*VDDA."+      },+      {+        "number": "2",+        "name": "VDDA",+        "type": "power_in",+        "description": "Analog power supply voltage input, operating range 2.5V to 3.6V."+      },+      {+        "number": "3",+        "name": "VSSA",+        "type": "power_in",+        "description": "Analog ground reference."+      },+      {+        "number": "4",+        "name": "VDDC",+        "type": "power_in",+        "description": "Digital core power supply voltage input, operating range 1.71V to 3.6V."+      },+      {+        "number": "5",+        "name": "VDDB",+        "type": "power_in",+        "description": "Digital buffer power supply voltage input, operating range 1.71V to 3.6V (must be ≥ VDDC)."+      },+      {+        "number": "6",+        "name": "VSSD",+        "type": "power_in",+        "description": "Digital ground reference."+      },+      {+        "number": "7",+        "name": "ADCOUT",+        "type": "output",+        "description": "Digital audio data output from ADC supporting Right Justified, Left Justified, I2S, PCM, and PCM Time Slot formats."+      },+      {+        "number": "8",+        "name": "DACIN",+        "type": "input",+        "description": "Digital audio data input to DAC supporting Right Justified, Left Justified, I2S, PCM, and PCM Time Slot formats."+      },+      {+        "number": "9",+        "name": "FS",+        "type": "bidirectional",+        "description": "Frame Sync input in slave mode or output in master mode, synchronized with audio sample period."+      },+      {+        "number": "10",+        "name": "BCLK",+        "type": "bidirectional",+        "description": "Bit Clock input in slave mode or output in master mode, synchronized with digital audio bits."+      },+      {+        "number": "11",+        "name": "MCLK",+        "type": "input",+        "description": "Master clock input for PLL reference and audio codec timing, supporting 2.7MHz to 26.0MHz."+      },+      {+        "number": "12",+        "name": "CSb/GPIO",+        "type": "bidirectional",+        "description": "SPI chip select (active low) input or configurable general purpose I/O pin for Jack Detect, Temperature Alert, or PLL clock output."+      },+      {+        "number": "13",+        "name": "SCLK",+        "type": "input",+        "description": "Serial clock input for SPI or 2-Wire I2C-style control interface timing."+      },+      {+        "number": "14",+        "name": "SDIO",+        "type": "bidirectional",+        "description": "Serial data pin for SPI data input or 2-Wire open-drain serial data used for register access and device control."+      },+      {+        "number": "15",+        "name": "MODE",+        "type": "input",+        "description": "Interface mode select input sampled at reset, selects 2-Wire (low) or SPI (high) control protocol."+      },+      {+        "number": "16",+        "name": "MOUT",+        "type": "output",+        "description": "Single-ended mono line/headphone output capable of driving 16Ω to 32Ω loads or line-level outputs."+      },+      {+        "number": "17",+        "name": "SPKOUT+",+        "type": "output",+        "description": "Positive output of differential Bridge-Tied Load speaker driver, capable of 1W output into 8Ω load at 5V supply."+      },+      {+        "number": "18",+        "name": "VSSSPK",+        "type": "power_in",+        "description": "Speaker output ground reference."+      },+      {+        "number": "19",+        "name": "SPKOUT-",+        "type": "output",+        "description": "Negative output of differential Bridge-Tied Load speaker driver, capable of 1W output into 8Ω load at 5V supply."+      },+      {+        "number": "20",+        "name": "VDDSPK",+        "type": "power_in",+        "description": "Speaker power supply voltage input, operating range 2.5V to 5.5V with boost mode dependent on configuration."+      },+      {+        "number": "21",+        "name": "AUX",+        "type": "input",+        "description": "Single-ended auxiliary input with 20kΩ input impedance, maximum signal level -3dB relative to full scale."+      },+      {+        "number": "22",+        "name": "VREF",+        "type": "power_in",+        "description": "Internal mid-supply reference voltage output (nominally 0.5*VDDA) requiring external 1-10µF decoupling capacitor."+      },+      {+        "number": "23",+        "name": "MIC-",+        "type": "input",+        "description": "Differential microphone negative input with programmable gain amplifier, input impedance 1.6kΩ to 75kΩ depending on gain setting."+      },+      {+        "number": "24",+        "name": "MIC+",+        "type": "input",+        "description": "Differential microphone positive input with programmable gain amplifier, fixed input impedance approximately 94kΩ."+      },+      {+        "number": "25",+        "name": "EP",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: SDIO pin marked as 'bidirectional' based on protocol descriptions in sections 12.9.1-12.9.2.3 showin; Exposed pad (EP) of QFN-24-EP package variant is noted in section 4 Note 1 but not assigned an expli",+          "exposed pad 25 added from the footprint",+          "dropped thermal pad ['EP'] absent from footprint"+        ],+        "pages_sent": 110,+        "cost_usd": 0.7053,+        "at": "2026-09-22T04:07:52"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588881669286219776",+        "pages": 110,+        "sha256": "a8e8cf219826c34f",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 25,+        "described": 25,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file