← Commit history
README.mdadded+106@@ -0,0 +1,106 @@+# N32WB452REQ6++**Nations Technologies Inc** · Microcontrollers (MCU/MPU/SOC) · QFN-64-EP(8x8)++N32WB452REQ6 from Nations Technologies Inc, in a QFN-64-EP(8x8). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VBAT | power_in | Battery / main power supply input, 1.8-3.6 V. Powers the RTC and backup domain when VDD is absent. |+| 2 | PC13-TAMPER-RTC | bidirectional | General-purpose I/O PC13, muxable to TAMPER input and RTC alarm/second output. Supplied from the backup domain - limited output drive (~3 mA, 2 MHz, 30 pF max). |+| 3 | PC14-OSC32_IN | bidirectional | GPIO PC14 or 32.768 kHz LSE oscillator input. Backup domain pin (limited drive). |+| 4 | PC15-OSC32_OUT | bidirectional | GPIO PC15 or 32.768 kHz LSE oscillator output. Backup domain pin (limited drive). |+| 5 | PD0-OSC_IN | bidirectional | After reset configured as HSE crystal oscillator input (OSC_IN, 4-32 MHz). May be reassigned as GPIO PD0. |+| 6 | PD1-OSC_OUT | bidirectional | After reset configured as HSE crystal oscillator output (OSC_OUT). May be reassigned as GPIO PD1. |+| 7 | NRST | bidirectional | Active-low system reset. Bidirectional with internal pull-up; asserted externally or by internal reset sources. |+| 8 | PC0 | bidirectional | GPIO PC0; alt: ADC12_IN6, I2C3_SCL, DVP_D2, UART6_TX. TTa I/O. |+| 9 | VSSA | power_in | Analog ground reference for ADC/DAC and analog blocks. |+| 10 | VDDA | power_in | Analog supply for ADC/DAC and analog blocks, 1.8-3.6 V. Tie to VDD through an LC filter for best analog performance. |+| 11 | PA0-WKUP | bidirectional | GPIO PA0 with wake-up input; alt: USART2_CTS, ADC1_IN1, TIM2/5/8 CH1/ETR, SPI3_MISO. |+| 12 | PA1 | bidirectional | GPIO PA1; alt: USART2_RTS, ADC1_IN2, TIM2/5_CH2, DVP_HSYNC, SPI3_MOSI/I2S3_SD. |+| 13 | PA2 | bidirectional | GPIO PA2; alt: USART2_TX, TIM5_CH3, ADC12_IN11, TIM2_CH3, DVP_VSYNC. |+| 14 | PA3 | bidirectional | GPIO PA3; alt: USART2_RX, TIM5_CH4, ADC1_IN4, TIM2_CH4, DVP_PCLK. |+| 15 | VSS_4 | power_in | Digital core ground. |+| 16 | VDD_4 | power_in | Digital I/O supply, 1.8-3.6 V. |+| 17 | PA4 | bidirectional | GPIO PA4; alt: SPI1_NSS, USART2_CK, DAC_OUT1, ADC2_IN1, DVP_D0, TSC_CHN0, I2C2_SCL. |+| 18 | PA5 | bidirectional | GPIO PA5; alt: SPI1_SCK, DAC_OUT2, ADC2_IN2, DVP_D1, TSC_CHN1, I2C2_SDA. |+| 19 | PA6 | bidirectional | GPIO PA6; alt: SPI1_MISO, TIM8_BKIN/TIM1_BKIN, ADC1_IN3, TIM3_CH1, DVP_D2. |+| 20 | PA7 | bidirectional | GPIO PA7; alt: SPI1_MOSI, TIM8_CH1N/TIM1_CH1N, ADC2_IN4, TIM3_CH2, DVP_D3. |+| 21 | PB0 | bidirectional | GPIO PB0; alt: TIM3_CH3, TIM8_CH2N, DVP_D6, TIM1_CH2N, UART6_TX. |+| 22 | PB1 | bidirectional | GPIO PB1; alt: ADC2_IN3, TIM3_CH4, TIM8_CH3N, DVP_D7, TIM1_CH3N, UART6_RX. |+| 23 | PB2-BOOT1 | bidirectional | GPIO PB2, also BOOT1 strap. Alt: ADC2_IN13, DVP_D3, UART4_TX, SPI1_NSS. |+| 24 | PB10 | bidirectional | GPIO PB10; alt: I2C2_SCL, USART3_TX, TIM2_CH3, XFMC_D11, DVP_D4. |+| 25 | PB11 | bidirectional | GPIO PB11; alt: I2C2_SDA, USART3_RX, TIM2_CH4, XFMC_D12, DVP_D5. |+| 26 | VSS_1 | power_in | Digital core ground. |+| 27 | VDD_1 | power_in | Digital I/O supply, 1.8-3.6 V. |+| 28 | PB12 | bidirectional | GPIO PB12; alt: SPI2_NSS/I2S2_WS, I2C2_SMBA, USART3_CK, TIM1_BKIN, CAN2_RX. |+| 29 | BLE_SWITCH | power_in | BLE radio power/mode switch control (dedicated BLE subsystem pin). Connect per Nations BLE reference application circuit. |+| 30 | PB13 | bidirectional | GPIO PB13; alt: SPI2_SCK/I2S2_CK, USART3_CTS, TIM1_CH1N, CAN2_TX, UART5_TX. |+| 31 | PB14 | bidirectional | GPIO PB14; alt: SPI2_MISO, TIM1_CH2N, USART3_RTS, TSC_CHN2, UART5_RX. |+| 32 | PB15 | bidirectional | GPIO PB15; alt: SPI2_MOSI/I2S2_SD, TIM1_CH3N, TSC_CHN3. |+| 33 | BLE_VDCDC | power_in | BLE DC-DC converter supply node. Connect per Nations BLE reference application circuit (DC-DC mode Fig. 3-4). |+| 34 | BLE_VCC | power_in | BLE analog / radio supply. Connect per Nations BLE reference application circuit. |+| 35 | PC6 | bidirectional | GPIO PC6; alt: I2S2_MCK, TIM8_CH1, SDIO_D6, I2C4_SCL, TSC_CHN8, TIM3_CH1, SPI2_NSS/I2S2_WS, USART2_CTS, XFMC_A16. |+| 36 | PC7 | bidirectional | GPIO PC7; alt: I2S3_MCK, TIM8_CH2, SDIO_D7, I2C4_SDA, TSC_CHN9, TIM3_CH2, SPI2_SCK/I2S2_CK, USART2_RTS, XFMC_A17. |+| 37 | PC8 | bidirectional | GPIO PC8; alt: TIM8_CH3, SDIO_D0, TSC_CHN10, TIM3_CH3, SPI2_MISO, USART2_TX. |+| 38 | PC9 | bidirectional | GPIO PC9; alt: TIM8_CH4, SDIO_D1, TSC_CHN11, TIM3_CH4, SPI2_MOSI/I2S2_SD, USART2_RX, XFMC_NOE. |+| 39 | PA8 | bidirectional | GPIO PA8; 5 V tolerant. Alt: USART1_CK, TIM1_CH1, MCO (clock output). |+| 40 | PA9 | bidirectional | GPIO PA9; 5 V tolerant. Alt: USART1_TX, TIM1_CH2, TSC_DOUT, I2C4_SCL. |+| 41 | BLE_RFIOP | bidirectional | BLE 2.4 GHz RF antenna port (single-ended, internally matched via on-chip balun). Route as 50 Ω to the antenna network per reference schematic. |+| 42 | BLE_VDCDCCRF | power_in | BLE RF DC-DC/decoupling node. Connect per Nations BLE reference application circuit. |+| 43 | PA10 | bidirectional | GPIO PA10; 5 V tolerant. Alt: USART1_RX, TIM1_CH3, I2C4_SDA, XFMC_MWE. |+| 44 | PA11-USB_DM | bidirectional | USB 2.0 Full-Speed device D- when USB is enabled; otherwise GPIO PA11 (5 V tolerant). Alt: USART1_CTS, CAN1_RX, TIM1_CH4. |+| 45 | PA12-USB_DP | bidirectional | USB 2.0 Full-Speed device D+ when USB is enabled; otherwise GPIO PA12 (5 V tolerant). Alt: USART1_RTS, CAN1_TX, TIM1_ETR. |+| 46 | PA13-SWDIO | bidirectional | After reset: JTMS / SWDIO serial-wire debug data. May be reassigned to GPIO PA13 or UART4_TX. 5 V tolerant. |+| 47 | VSS_2 | power_in | Digital core ground. |+| 48 | VDD_2 | power_in | Digital I/O supply, 1.8-3.6 V. |+| 49 | PA14-SWCLK | bidirectional | After reset: JTCK / SWCLK serial-wire debug clock. May be reassigned to GPIO PA14 or UART4_RX. 5 V tolerant. |+| 50 | PA15 | bidirectional | After reset: JTDI. Alt: SPI3_NSS/I2S3_WS, PA15 GPIO, SPI1_NSS, USART2_CTS, TIM8_CH1N, TIM2_CH1_ETR. 5 V tolerant. |+| 51 | PC10 | bidirectional | GPIO PC10; alt: UART4_TX, SDIO_D2, TSC_CHN12, USART3_TX, SPI3_SCK/I2S3_CK. |+| 52 | PC12 | bidirectional | GPIO PC12; alt: UART5_TX, SDIO_CK, TSC_CHN14, USART3_CK, SPI3_MOSI/I2S3_SD, TIM8_CH2N. |+| 53 | PD2 | bidirectional | GPIO PD2; alt: TIM3_ETR, UART5_RX, SDIO_CMD, TSC_CHN15, SPI3_NSS/I2S3_WS, TIM8_CH3N. |+| 54 | BLE_DVDD | power_in | BLE digital supply. Connect per Nations BLE reference application circuit. |+| 55 | BLE_XO32MM | passive | BLE 32 MHz crystal oscillator terminal (M, minus side). Connect the 32 MHz XTAL and load caps per reference schematic. |+| 56 | BLE_XO32MP | passive | BLE 32 MHz crystal oscillator terminal (P, plus side). Pair with BLE_XO32MM to the 32 MHz XTAL. |+| 57 | PB3 | bidirectional | After reset: JTDO. Alt: PB3 GPIO, TRACESWO, TIM2_CH2, SPI1_SCK/SPI3_SCK/I2S3_CK, USART2_RTS, TIM8_BKIN. 5 V tolerant. |+| 58 | PB4 | bidirectional | After reset: NJTRST. Alt: PB4 GPIO, SPI3_MISO/SPI1_MISO, TIM3_CH1, USART2_TX, TIM8_ETR. 5 V tolerant. |+| 59 | PB5 | bidirectional | GPIO PB5; alt: I2C1_SMBA, SPI3_MOSI/I2S3_SD, TIM3_CH2, SPI1_MOSI, CAN2_RX, USART2_RX, TIM1_BKIN. 5 V tolerant. |+| 60 | PB6 | bidirectional | GPIO PB6; alt: I2C1_SCL, TIM4_CH1, TSC_CHN20, USART1_TX, CAN2_TX, XFMC_NE2/NCE3. |+| 61 | PB7 | bidirectional | GPIO PB7; alt: I2C1_SDA, XFMC_NADV, TIM4_CH2, TSC_CHN21, USART1_RX. |+| 62 | BOOT0 | input | Boot-mode select input sampled at reset. Together with BOOT1 selects boot from main Flash, system memory (bootloader), or SRAM. |+| 63 | VSS_3 | power_in | Digital core ground. |+| 64 | VDD_3 | power_in | Digital I/O supply, 1.8-3.6 V. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Nations Technologies Inc |+| Package | QFN-64-EP(8x8) |+| Category | MCU |+| Pins | 64 |++## Ordering variants++- `N32WB452REQ6CEQ6`+- `N32WB452REQ6`+- `N32WB452REQ6LEQ6`++## CAD (KiCad official)++- Symbol: `N32WB452REQ6`+- Footprint: `Package_DFN_QFN:QFN-64-1EP_8x8mm_P0.4mm_EP6.5x6.5mm`+- 3D model: QFN-64-EP(8x8) (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Nations Technologies Inc datasheet](docs/n32wb452req6-datasheet.pdf) (88 pp, sha256 `082b04b4fedea011`, retrieved 2026-08-17, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/n32wb452req6-datasheet.pdf)
page.jsonadded+34@@ -0,0 +1,34 @@+{+ "slug": "n32wb452req6",+ "version": "0.1.0",+ "type": "component",+ "description": "Nations Technologies Inc Microcontrollers (MCU/MPU/SOC), QFN-64-EP(8x8). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "mcu",+ "n32wb452req6"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "n32wb452req6.kicad_sym",+ "n32wb452req6.kicad_mod",+ "n32wb452req6.glb",+ "n32wb452req6.step",+ "n32wb452req6.lbr",+ "docs/hero.png",+ "docs/n32wb452req6-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "visibility": "public",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}