← Commit history

n32g455ccl7: factory component page (tier=lcsc)

Ray ·6dfa9cf844 · ·parent 9645fde
1 file changed +406−8
page.json+406−8
@@ -1,13 +1,416 @@ {+  "schema_version": 1,+  "type": "component",   "slug": "n32g455ccl7",+  "title": "N32G455CCL7",+  "brief": "Nations Technologies Inc Microcontrollers (MCU/MPU/SOC), LQFP-48(7x7). Datasheet-verified pinout, KiCad symbol/footprint/3D.",   "version": "0.1.0",-  "type": "component",-  "description": "Nations Technologies Inc Microcontrollers (MCU/MPU/SOC), LQFP-48(7x7). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "license": "CC-BY-SA-4.0",   "tags": [     "component",     "mcu",     "n32g455ccl7"   ],+  "component": {+    "mpn": "N32G455CCL7",+    "manufacturer": "Nations Technologies Inc",+    "package": "LQFP-48(7x7)",+    "pin_count": 48,+    "category": "MCU",+    "subcategory": "Microcontrollers (MCU/MPU/SOC)",+    "datasheet": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2203081830_Nations-Technologies-Inc-N32G455CCL7_C2981438.pdf",+    "parts": {+      "symbol": "n32g455ccl7.kicad_sym",+      "footprint": "n32g455ccl7.kicad_mod",+      "model_3d": "n32g455ccl7.glb",+      "model_3d_step": "n32g455ccl7.step",+      "lbr": "n32g455ccl7.lbr"+    },+    "distributor_links": {},+    "pins": [+      {+        "number": "1",+        "name": "VBAT",+        "type": "power_in",+        "description": "Battery-backed supply for RTC, LSE oscillator, and backup registers. Connect to a 1.8-3.6 V cell when VDD is absent; otherwise tie to VDD."+      },+      {+        "number": "2",+        "name": "PC13/TAMPER-RTC",+        "type": "bidirectional",+        "description": "GPIO PC13, alternate TAMPER-RTC. TC I/O powered from VBAT switch (max drive ~3 mA, 2 MHz / 30 pF load); not intended for high-drive loads."+      },+      {+        "number": "3",+        "name": "PC14/OSC32_IN",+        "type": "bidirectional",+        "description": "LSE 32.768 kHz crystal input, or GPIO PC14 when LSE is not used. TC I/O powered from the VBAT switch."+      },+      {+        "number": "4",+        "name": "PC15/OSC32_OUT",+        "type": "bidirectional",+        "description": "LSE 32.768 kHz crystal output, or GPIO PC15 when LSE is not used. TC I/O powered from the VBAT switch."+      },+      {+        "number": "5",+        "name": "PD0/OSC_IN",+        "type": "bidirectional",+        "description": "HSE crystal input (4-32 MHz) by default after reset on LQFP48/64. Can be reconfigured by software as GPIO PD0."+      },+      {+        "number": "6",+        "name": "PD1/OSC_OUT",+        "type": "bidirectional",+        "description": "HSE crystal output by default after reset on LQFP48/64. Can be reconfigured by software as GPIO PD1."+      },+      {+        "number": "7",+        "name": "NRST",+        "type": "bidirectional",+        "description": "Bidirectional active-low reset. Drive low externally to reset the MCU; also driven low internally by watchdog/POR/BOR."+      },+      {+        "number": "8",+        "name": "VSSA",+        "type": "power_in",+        "description": "Analog ground for ADC, DAC, OPAMP, COMP, VREF and analog switches. Connect to a clean analog ground plane."+      },+      {+        "number": "9",+        "name": "VDDA",+        "type": "power_in",+        "description": "Analog supply for ADC, DAC, OPAMP, COMP and internal VREF. Operating range 1.8-3.6 V; must be tied to VDD when analog blocks are used."+      },+      {+        "number": "10",+        "name": "PA0/WKUP",+        "type": "bidirectional",+        "description": "GPIO PA0. Alternates: WKUP wake-up input, USART2_CTS, ADC1_IN1, TIM2/5/8 CH1/ETR, COMP1_OUT/INM, SPI3_MISO. TTa I/O, 3.3 V-tolerant with analog function."+      },+      {+        "number": "11",+        "name": "PA1",+        "type": "bidirectional",+        "description": "GPIO PA1. Alternates: USART2_RTS, ADC1_IN2, TIM5_CH2, TIM2_CH2, COMP1_INP, OPAMP1_VINP, OPAMP3_VINP, SPI3_MOSI/I2S3_SD."+      },+      {+        "number": "12",+        "name": "PA2",+        "type": "bidirectional",+        "description": "GPIO PA2. Alternates: USART2_TX, TIM5_CH3, ADC12_IN3, TIM2_CH3, COMP2_OUT, OPAMP1_INM, OPAMP2_INM."+      },+      {+        "number": "13",+        "name": "PA3",+        "type": "bidirectional",+        "description": "GPIO PA3. Alternates: USART2_RX, TIM5_CH4, ADC1_IN4, TIM2_CH4, OPAMP1_INM, OPAMP1_VINP, COMP5_INP."+      },+      {+        "number": "14",+        "name": "PA4",+        "type": "bidirectional",+        "description": "GPIO PA4. Alternates: SPI1_NSS, USART2_CK, DAC_OUT1, ADC2_IN1, QSPI_NSS, TSC_CHN0, and many COMPx_INM / OPAMPx_INM / I2C2_SCL redefined functions."+      },+      {+        "number": "15",+        "name": "PA5",+        "type": "bidirectional",+        "description": "GPIO PA5. Alternates: SPI1_SCK, DAC_OUT2, ADC2_IN2, QSPI_SCK, TSC_CHN1, and many COMPx_INM / OPAMPx_VINM/VINP / I2C2_SDA redefined functions."+      },+      {+        "number": "16",+        "name": "PA6",+        "type": "bidirectional",+        "description": "GPIO PA6. Alternates: SPI1_MISO, TIM8_BKIN, ADC1_IN3, TIM3_CH1, COMP1_OUT, QSPI_IO0, TIM1_BKIN, OPAMP1_VOUT, COMP2_OUT."+      },+      {+        "number": "17",+        "name": "PA7",+        "type": "bidirectional",+        "description": "GPIO PA7. Alternates: SPI1_MOSI, TIM8_CH1N, ADC2_IN4, TIM3_CH2, QSPI_IO1, COMP2_OUT, TIM1_CH1N, COMP2_INP, OPAMP1_VINP, OPAMP2_VINP, COMP6_INM."+      },+      {+        "number": "18",+        "name": "PB0",+        "type": "bidirectional",+        "description": "GPIO PB0. Alternates: ADC3_IN12, TIM3_CH3, TIM8_CH2N, TIM1_CH2N, UART6_TX, OPAMP2_VINP, COMP3_INP, COMP5_OUT."+      },+      {+        "number": "19",+        "name": "PB1",+        "type": "bidirectional",+        "description": "GPIO PB1. Alternates: ADC2_IN3, TIM3_CH4, TIM8_CH3N, COMP4_OUT, TIM1_CH3N, OPAMP2_VOUT, UART6_RX, COMP2_INM, COMP1_OUT."+      },+      {+        "number": "20",+        "name": "PB2/BOOT1",+        "type": "bidirectional",+        "description": "GPIO PB2, also BOOT1 boot-mode select strap. Alternates: ADC2_IN13, UART4_TX, SPI1_NSS. Sample-at-reset for boot mode."+      },+      {+        "number": "21",+        "name": "PB10",+        "type": "bidirectional",+        "description": "GPIO PB10. Fail-safe I/O. Alternates: I2C2_SCL, USART3_TX, TIM2_CH3, COMP5_INM, OPAMP3_VINM, OPAMP4_VINM, COMP1_INP, COMP3_OUT."+      },+      {+        "number": "22",+        "name": "PB11",+        "type": "bidirectional",+        "description": "GPIO PB11. Alternates: I2C2_SDA, USART3_RX, ADC3_IN1, TIM2_CH4, OPAMP4_VOUT, COMP2_INP, COMP5_OUT."+      },+      {+        "number": "23",+        "name": "VSS_1",+        "type": "power_in",+        "description": "Digital ground. Connect to system ground plane."+      },+      {+        "number": "24",+        "name": "VDD_1",+        "type": "power_in",+        "description": "Digital supply, 1.8-3.6 V. Decouple locally with 100 nF ceramic (see supply-decoupling recommendations in section 4)."+      },+      {+        "number": "25",+        "name": "PB12",+        "type": "bidirectional",+        "description": "GPIO PB12. Alternates: SPI2_NSS, I2S2_WS, I2C2_SMBA, USART3_CK, TIM1_BKIN, CAN2_RX, ADC4_IN3, COMP3_INM, OPAMP4_VOUT, COMP4_OUT."+      },+      {+        "number": "26",+        "name": "PB13",+        "type": "bidirectional",+        "description": "GPIO PB13. Alternates: SPI2_SCK, I2S2_CK, USART3_CTS, TIM1_CH1N, CAN2_TX, ADC3_IN5, UART5_TX, COMP4_INM."+      },+      {+        "number": "27",+        "name": "PB14",+        "type": "bidirectional",+        "description": "GPIO PB14. Alternates: SPI2_MISO, TIM1_CH2N, USART3_RTS, ADC4_IN4, TSC_CHN2, COMP3_INP, UART5_RX."+      },+      {+        "number": "28",+        "name": "PB15",+        "type": "bidirectional",+        "description": "GPIO PB15. Alternates: SPI2_MOSI, I2S2_SD, TIM1_CH3N, ADC4_IN5, TSC_CHN3, COMP4_INP."+      },+      {+        "number": "29",+        "name": "PA8",+        "type": "bidirectional",+        "description": "GPIO PA8, 5 V tolerant (FT). Alternates: USART1_CK, TIM1_CH1, MCO clock output."+      },+      {+        "number": "30",+        "name": "PA9",+        "type": "bidirectional",+        "description": "GPIO PA9, 5 V tolerant. Alternates: USART1_TX, TIM1_CH2, TSC_DOUT, I2C4_SCL."+      },+      {+        "number": "31",+        "name": "PA10",+        "type": "bidirectional",+        "description": "GPIO PA10, 5 V tolerant. Alternates: USART1_RX, TIM1_CH3, I2C4_SDA."+      },+      {+        "number": "32",+        "name": "PA11/USBDM",+        "type": "bidirectional",+        "description": "USB 2.0 FS device D- line. Also GPIO PA11, 5 V tolerant. Alternates: USART1_CTS, CAN1_RX, TIM1_CH4, COMP1_OUT, COMP5_OUT."+      },+      {+        "number": "33",+        "name": "PA12/USBDP",+        "type": "bidirectional",+        "description": "USB 2.0 FS device D+ line. Also GPIO PA12, 5 V tolerant. Alternates: USART1_RTS, CAN1_TX, TIM1_ETR, COMP2_OUT, COMP6_OUT."+      },+      {+        "number": "34",+        "name": "PA13/JTMS-SWDIO",+        "type": "bidirectional",+        "description": "SWD data / JTAG TMS after reset. Also reconfigurable as GPIO PA13 or UART4_TX."+      },+      {+        "number": "35",+        "name": "VSS_2",+        "type": "power_in",+        "description": "Digital ground."+      },+      {+        "number": "36",+        "name": "VDD_2",+        "type": "power_in",+        "description": "Digital supply, 1.8-3.6 V. Decouple locally with 100 nF ceramic."+      },+      {+        "number": "37",+        "name": "PA14/JTCK-SWCLK",+        "type": "bidirectional",+        "description": "SWD clock / JTAG TCK after reset. Also reconfigurable as GPIO PA14 or UART4_RX."+      },+      {+        "number": "38",+        "name": "PA15/JTDI",+        "type": "bidirectional",+        "description": "JTAG data input (JTDI) after reset. Alternates when remapped: GPIO PA15, SPI3_NSS, I2S3_WS, TIM2_CH1_ETR, SPI1_NSS, USART2_CTS, TIM8_CH1N."+      },+      {+        "number": "39",+        "name": "PB3/JTDO",+        "type": "bidirectional",+        "description": "JTAG data output / TRACESWO after reset. Alternates: GPIO PB3, SPI3_SCK, I2S3_CK, TIM2_CH2, SPI1_SCK, USART2_RTS, TIM8_BKIN."+      },+      {+        "number": "40",+        "name": "PB4/NJTRST",+        "type": "bidirectional",+        "description": "JTAG reset (active low) after reset. Alternates: GPIO PB4, SPI3_MISO, TIM3_CH1, SPI1_MISO, USART2_TX, TIM8_ETR."+      },+      {+        "number": "41",+        "name": "PB5",+        "type": "bidirectional",+        "description": "GPIO PB5, 5 V tolerant. Alternates: I2C1_SMBA, SPI3_MOSI, I2S3_SD, TIM3_CH2, SPI1_MOSI, CAN2_RX, USART2_RX, TIM1_BKIN."+      },+      {+        "number": "42",+        "name": "PB6",+        "type": "bidirectional",+        "description": "GPIO PB6. Alternates: I2C1_SCL, TIM4_CH1, TSC_CHN20, USART1_TX, CAN2_TX, COMP5_OUT."+      },+      {+        "number": "43",+        "name": "PB7",+        "type": "bidirectional",+        "description": "GPIO PB7. Alternates: I2C1_SDA, TIM4_CH2, TSC_CHN21, USART1_RX, COMP6_OUT."+      },+      {+        "number": "44",+        "name": "BOOT0",+        "type": "input",+        "description": "Boot-mode strap sampled at reset. Combined with BOOT1 (PB2) it selects boot from Flash, System Memory (bootloader), or SRAM."+      },+      {+        "number": "45",+        "name": "PB8",+        "type": "bidirectional",+        "description": "GPIO PB8. Alternates: TIM4_CH3, SDIO_D4, COMP1_OUT, TSC_CHN22, I2C1_SCL, CAN1_RX, UART5_TX."+      },+      {+        "number": "46",+        "name": "PB9",+        "type": "bidirectional",+        "description": "GPIO PB9. Alternates: TIM4_CH4, SDIO_D5, COMP2_OUT, TSC_CHN23, I2C1_SDA, CAN1_TX, UART5_RX."+      },+      {+        "number": "47",+        "name": "VSS_3",+        "type": "power_in",+        "description": "Digital ground."+      },+      {+        "number": "48",+        "name": "VDD_3",+        "type": "power_in",+        "description": "Digital supply, 1.8-3.6 V. Decouple locally with 100 nF ceramic."+      }+    ],+    "provenance": {+      "extractor": "ds2sf",+      "datasheet": {+        "url": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2203081830_Nations-Technologies-Inc-N32G455CCL7_C2981438.pdf",+        "pages": 87,+        "sha256": "d7532f973fd1b7fb",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 48,+        "described": 48,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "metadata": {+    "specs": {+      "Manufacturer": "Nations Technologies Inc",+      "Package": "LQFP-48(7x7)",+      "Category": "MCU",+      "Pins": "48"+    }+  },+  "variants": [+    {+      "mpn": "N32G455CCL7CBL7",+      "kind": "packaging"+    },+    {+      "mpn": "N32G455CCL7",+      "kind": "packaging"+    },+    {+      "mpn": "N32G455CCL7CEQ7",+      "kind": "packaging"+    },+    {+      "mpn": "N32G455CCL7RBL7",+      "kind": "packaging"+    },+    {+      "mpn": "N32G455CCL7RCL7",+      "kind": "packaging"+    },+    {+      "mpn": "N32G455CCL7REL7",+      "kind": "packaging"+    },+    {+      "mpn": "N32G455CCL7MBL7",+      "kind": "packaging"+    },+    {+      "mpn": "N32G455CCL7MCL7",+      "kind": "packaging"+    },+    {+      "mpn": "N32G455CCL7MEL7",+      "kind": "packaging"+    },+    {+      "mpn": "N32G455CCL7VBL7",+      "kind": "packaging"+    },+    {+      "mpn": "N32G455CCL7VCL7",+      "kind": "packaging"+    },+    {+      "mpn": "N32G455CCL7VEL7",+      "kind": "packaging"+    }+  ],+  "sections": [+    "hero",+    "viewers",+    "readme",+    "breadcrumbs",+    "info"+  ],+  "discovery_triggers": [+    "n32g455ccl7"+  ],+  "discovery_pitch": "N32G455CCL7 (Nations Technologies Inc) component page with datasheet-verified CAD.",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  },   "dependencies": {},   "hero": {     "type": "image",@@ -25,10 +428,5 @@     "docs/n32g455ccl7-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ],-  "visibility": "public",-  "author": {-    "name": "Ray",-    "email": "[email protected]"-  }+  ] }\ No newline at end of file