← Commit history
n32g452ccl7: restore the component block (pinout + model declarations) from this page's own README and symbol
1 file changed
+314−1
page.json+314−1@@ -33,5 +33,318 @@ "author": { "name": "Ray", "email": "[email protected]"+ },+ "component": {+ "mpn": "N32G452CCL7",+ "manufacturer": "Nations Technologies Inc",+ "package": "LQFP-48(7x7)",+ "pin_count": 48,+ "category": "Microcontrollers (MCU/MPU/SOC)",+ "parts": {+ "symbol": "n32g452ccl7.kicad_sym",+ "footprint": "n32g452ccl7.kicad_mod",+ "model_3d": "n32g452ccl7-etched.glb",+ "model_3d_plain": "n32g452ccl7.glb",+ "model_3d_step": "n32g452ccl7-etched.step",+ "model_3d_step_plain": "n32g452ccl7.step",+ "lbr": "n32g452ccl7.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "VBAT",+ "type": "power_in",+ "description": "Battery backup supply (1.8-3.6 V) for the RTC, LSE oscillator and backup registers when VDD is not present."+ },+ {+ "number": "2",+ "name": "PC13/TAMPER-RTC",+ "type": "bidirectional",+ "description": "Backup-domain I/O; default function TAMPER-RTC (anti-tamper detection / RTC alarm output). PC13/14/15 are fed from a backup switch limited to 3 mA total; when driven as outputs, max 2 MHz and max load 30 pF."+ },+ {+ "number": "3",+ "name": "PC14/OSC32_IN",+ "type": "bidirectional",+ "description": "Backup-domain I/O; default 32.768 kHz LSE crystal input (OSC32_IN). Same 3 mA / 2 MHz / 30 pF restriction as PC13."+ },+ {+ "number": "4",+ "name": "PC15/OSC32_OUT",+ "type": "bidirectional",+ "description": "Backup-domain I/O; default 32.768 kHz LSE crystal output (OSC32_OUT). Same 3 mA / 2 MHz / 30 pF restriction as PC13."+ },+ {+ "number": "5",+ "name": "OSC_IN/PD0",+ "type": "input",+ "description": "HSE crystal input (OSC_IN) after reset - 4-32 MHz external crystal. Can be remapped as general-purpose PD0 in LQFP48 (input only when used as GPIO)."+ },+ {+ "number": "6",+ "name": "OSC_OUT/PD1",+ "type": "output",+ "description": "HSE crystal output (OSC_OUT) after reset - 4-32 MHz external crystal. Can be remapped as general-purpose PD1 in LQFP48 (output only when used as GPIO)."+ },+ {+ "number": "7",+ "name": "NRST",+ "type": "bidirectional",+ "description": "Bidirectional active-low reset pin with internal weak pull-up. Driven low by internal reset sources; pulled low externally to force reset."+ },+ {+ "number": "8",+ "name": "VSSA",+ "type": "power_in",+ "description": "Analog ground return for ADC, DAC, VREF and internal analog references. Tie to system ground."+ },+ {+ "number": "9",+ "name": "VDDA",+ "type": "power_in",+ "description": "Analog supply for the ADC, DAC and internal reference (1.8-3.6 V). On LQFP48 the internal VREF+ is tied to VDDA (dedicated VREF+/VREF- pins are only broken out on LQFP100/128)."+ },+ {+ "number": "10",+ "name": "PA0-WKUP",+ "type": "bidirectional",+ "description": "General-purpose I/O (TTa, 3.3 V analog-capable). Default WKUP standby wake-up input. Alt: USART2_CTS, TIM2_CH1_ETR, TIM5_CH1, TIM8_ETR, SPI3_MISO, ADC1_IN1."+ },+ {+ "number": "11",+ "name": "PA1",+ "type": "bidirectional",+ "description": "General-purpose I/O (TTa). Alt: USART2_RTS, TIM5_CH2, TIM2_CH2, SPI3_MOSI, I2S3_SD, ADC1_IN2."+ },+ {+ "number": "12",+ "name": "PA2",+ "type": "bidirectional",+ "description": "General-purpose I/O (TTa). Alt: USART2_TX, TIM5_CH3, TIM2_CH3, ADC12_IN11."+ },+ {+ "number": "13",+ "name": "PA3",+ "type": "bidirectional",+ "description": "General-purpose I/O (TTa). Alt: USART2_RX, TIM5_CH4, TIM2_CH4, ADC1_IN4."+ },+ {+ "number": "14",+ "name": "PA4",+ "type": "bidirectional",+ "description": "General-purpose I/O (TTa). Alt: SPI1_NSS, USART2_CK, DAC_OUT1, ADC2_IN1, QSPI_NSS, I2C2_SCL."+ },+ {+ "number": "15",+ "name": "PA5",+ "type": "bidirectional",+ "description": "General-purpose I/O (TTa). Alt: SPI1_SCK, DAC_OUT2, ADC2_IN2, QSPI_SCK, I2C2_SDA."+ },+ {+ "number": "16",+ "name": "PA6",+ "type": "bidirectional",+ "description": "General-purpose I/O (TTa). Alt: SPI1_MISO, TIM8_BKIN, TIM3_CH1, QSPI_IO0, TIM1_BKIN, ADC1_IN3."+ },+ {+ "number": "17",+ "name": "PA7",+ "type": "bidirectional",+ "description": "General-purpose I/O (TTa). Alt: SPI1_MOSI, TIM8_CH1N, TIM3_CH2, QSPI_IO1, TIM1_CH1N, ADC2_IN4."+ },+ {+ "number": "18",+ "name": "PB0",+ "type": "bidirectional",+ "description": "General-purpose I/O (TC 3.3 V). Alt: TIM3_CH3, TIM8_CH2N, TIM1_CH2N, UART6_TX."+ },+ {+ "number": "19",+ "name": "PB1",+ "type": "bidirectional",+ "description": "General-purpose I/O (TTa). Alt: TIM3_CH4, TIM8_CH3N, TIM1_CH3N, UART6_RX, ADC2_IN3."+ },+ {+ "number": "20",+ "name": "PB2/BOOT1",+ "type": "bidirectional",+ "description": "General-purpose I/O (TTa) also sampled at reset as BOOT1 to select boot mode together with BOOT0. Alt: UART4_TX, SPI1_NSS, ADC2_IN13."+ },+ {+ "number": "21",+ "name": "PB10",+ "type": "bidirectional",+ "description": "General-purpose I/O (TC). Alt: I2C2_SCL, USART3_TX, TIM2_CH3."+ },+ {+ "number": "22",+ "name": "PB11",+ "type": "bidirectional",+ "description": "General-purpose I/O (TC). Alt: I2C2_SDA, USART3_RX, TIM2_CH4."+ },+ {+ "number": "23",+ "name": "VSS_1",+ "type": "power_in",+ "description": "Digital ground for the core / I/O domain (pair with VDD_1)."+ },+ {+ "number": "24",+ "name": "VDD_1",+ "type": "power_in",+ "description": "Digital supply (1.8-3.6 V) for the core / I/O domain - decouple with 100 nF next to the pin plus a bulk cap shared with the other VDD pins."+ },+ {+ "number": "25",+ "name": "PB12",+ "type": "bidirectional",+ "description": "General-purpose I/O (TC). Alt: SPI2_NSS, I2S2_WS, I2C2_SMBA, USART3_CK, TIM1_BKIN, CAN2_RX."+ },+ {+ "number": "26",+ "name": "PB13",+ "type": "bidirectional",+ "description": "General-purpose I/O (TC). Alt: SPI2_SCK, I2S2_CK, USART3_CTS, TIM1_CH1N, CAN2_TX, UART5_TX."+ },+ {+ "number": "27",+ "name": "PB14",+ "type": "bidirectional",+ "description": "General-purpose I/O (TC). Alt: SPI2_MISO, TIM1_CH2N, USART3_RTS, UART5_RX."+ },+ {+ "number": "28",+ "name": "PB15",+ "type": "bidirectional",+ "description": "General-purpose I/O (TC). Alt: SPI2_MOSI, I2S2_SD, TIM1_CH3N."+ },+ {+ "number": "29",+ "name": "PA8",+ "type": "bidirectional",+ "description": "General-purpose I/O (FT, 5 V-tolerant). Alt: USART1_CK, TIM1_CH1, MCO clock output."+ },+ {+ "number": "30",+ "name": "PA9",+ "type": "bidirectional",+ "description": "General-purpose I/O (FT). Alt: USART1_TX, TIM1_CH2, I2C4_SCL."+ },+ {+ "number": "31",+ "name": "PA10",+ "type": "bidirectional",+ "description": "General-purpose I/O (FT). Alt: USART1_RX, TIM1_CH3, I2C4_SDA."+ },+ {+ "number": "32",+ "name": "PA11",+ "type": "bidirectional",+ "description": "General-purpose I/O (FT) also serving as USB 2.0 FS D- (USBDM). Alt: USART1_CTS, CAN1_RX, TIM1_CH4."+ },+ {+ "number": "33",+ "name": "PA12",+ "type": "bidirectional",+ "description": "General-purpose I/O (FT) also serving as USB 2.0 FS D+ (USBDP). Alt: USART1_RTS, CAN1_TX, TIM1_ETR."+ },+ {+ "number": "34",+ "name": "PA13/JTMS-SWDIO",+ "type": "bidirectional",+ "description": "Default JTMS / SWDIO debug pin after reset (SWJ-DP, weak pull-up). Alt: PA13 GPIO, UART4_TX."+ },+ {+ "number": "35",+ "name": "VSS_2",+ "type": "power_in",+ "description": "Digital ground for the core / I/O domain (pair with VDD_2)."+ },+ {+ "number": "36",+ "name": "VDD_2",+ "type": "power_in",+ "description": "Digital supply (1.8-3.6 V) for the core / I/O domain - decouple with 100 nF next to the pin."+ },+ {+ "number": "37",+ "name": "PA14/JTCK-SWCLK",+ "type": "bidirectional",+ "description": "Default JTCK / SWCLK debug clock after reset (SWJ-DP, weak pull-down). Alt: PA14 GPIO, UART4_RX."+ },+ {+ "number": "38",+ "name": "PA15/JTDI",+ "type": "bidirectional",+ "description": "Default JTDI JTAG data-in after reset (weak pull-up). Alt: PA15 GPIO, SPI3_NSS/I2S3_WS, TIM2_CH1_ETR, SPI1_NSS, USART2_CTS, TIM8_CH1N."+ },+ {+ "number": "39",+ "name": "PB3/JTDO",+ "type": "bidirectional",+ "description": "Default JTDO JTAG data-out / TRACESWO after reset. Alt: PB3 GPIO, SPI3_SCK/I2S3_CK, TIM2_CH2, SPI1_SCK, USART2_RTS, TIM8_BKIN."+ },+ {+ "number": "40",+ "name": "PB4/NJTRST",+ "type": "bidirectional",+ "description": "Default NJTRST JTAG reset (active-low, weak pull-up) after reset. Alt: PB4 GPIO, SPI3_MISO, TIM3_CH1, SPI1_MISO, USART2_TX, TIM8_ETR."+ },+ {+ "number": "41",+ "name": "PB5",+ "type": "bidirectional",+ "description": "General-purpose I/O (FT). Alt: I2C1_SMBA, SPI3_MOSI/I2S3_SD, TIM3_CH2, SPI1_MOSI, CAN2_RX, USART2_RX, TIM1_BKIN."+ },+ {+ "number": "42",+ "name": "PB6",+ "type": "bidirectional",+ "description": "General-purpose I/O (TC). Alt: I2C1_SCL, TIM4_CH1, USART1_TX, CAN2_TX."+ },+ {+ "number": "43",+ "name": "PB7",+ "type": "bidirectional",+ "description": "General-purpose I/O (TC). Alt: I2C1_SDA, TIM4_CH2, USART1_RX."+ },+ {+ "number": "44",+ "name": "BOOT0",+ "type": "input",+ "description": "Boot-mode select input sampled at reset. With BOOT1 (PB2) it chooses between main Flash, system-memory bootloader (UART/USB) and SRAM."+ },+ {+ "number": "45",+ "name": "PB8",+ "type": "bidirectional",+ "description": "General-purpose I/O (TC). Alt: TIM4_CH3, SDIO_DAT4, I2C1_SCL, CAN1_RX, UART5_TX."+ },+ {+ "number": "46",+ "name": "PB9",+ "type": "bidirectional",+ "description": "General-purpose I/O (TC). Alt: TIM4_CH4, SDIO_DAT5, I2C1_SDA, CAN1_TX, UART5_RX."+ },+ {+ "number": "47",+ "name": "VSS_3",+ "type": "power_in",+ "description": "Digital ground for the core / I/O domain (pair with VDD_3)."+ },+ {+ "number": "48",+ "name": "VDD_3",+ "type": "power_in",+ "description": "Digital supply (1.8-3.6 V) for the core / I/O domain - decouple with 100 nF next to the pin."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ } }-}+}