← Commit history

Initial commit: component/n32g435cbl7

Ray ·44dc422534 ·
2 files changed +127
README.mdadded+93
@@ -0,0 +1,93 @@+# N32G435CBL7++**Nations Technologies Inc** · Microcontrollers (MCU/MPU/SOC) · LQFP-48(7x7)++N32G435CBL7 from Nations Technologies Inc, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VDD | power_in | Main digital supply. 1.8-3.6 V. Bypass with 100 nF + shared 4.7 uF close to the pin. |+| 2 | PC13-TAMPER-RTC | bidirectional | General-purpose I/O PC13; alt: TIM1_CH1N, EVENTOUT; option: TAMP1-RTC, RTC_OUT, WKUP2. Low-drive pin (max 3 mA out at 2 MHz, 30 pF). |+| 3 | PC14-OSC32_IN | bidirectional | GPIO PC14; option: OSC32_IN - LSE 32.768 kHz crystal input. Low-drive pin (3 mA). |+| 4 | PC15-OSC32_OUT | bidirectional | GPIO PC15; option: OSC32_OUT - LSE 32.768 kHz crystal output. Low-drive pin (3 mA). |+| 5 | PD14-OSC_IN | bidirectional | GPIO PD14; option: OSC_IN - HSE crystal input (4-32 MHz). Alt: USART2_TX, I2C2_SDA, TIM1_CH3N. |+| 6 | PD15-OSC_OUT | bidirectional | GPIO PD15; option: OSC_OUT - HSE crystal output. Alt: USART2_RX, I2C2_SCL. |+| 7 | NRST | input | Bidirectional device reset, active low. Internal pull-up. Drive low to reset the MCU. |+| 8 | VSSA/VREF- | power_in | Analog ground and negative reference for ADC/DAC. Tie to VSS at a single point. |+| 9 | VDDA/VREF+ | power_in | Analog supply and positive reference for ADC/DAC/OPAMP/COMP/TSC. 1.8-3.6 V. Bypass with 10 nF + 1 uF; VREF caps 100 nF + 1 uF. |+| 10 | PA0 | bidirectional | GPIO with rich mux: USART2_CTS, LPUART_RX, TIM2_CH1/ETR, TIM5_CH1, TIM8_ETR, SPI1_MISO, I2S1_MCK, COMP1_OUT. Analog: ADC_IN1, COMP1_INM/INP, WKUP1, TAMP2-RTC. |+| 11 | PA1 | bidirectional | GPIO. Alt: USART2_RTS, LPUART_TX, TIM5_CH2, TIM2_CH2. Analog: ADC1_IN2, COMP1_INP, OPAMP1_VINP. |+| 12 | PA2 | bidirectional | GPIO. Alt: USART2_TX, TIM5_CH3, TIM2_CH3, TSC_CH1, I2C2_SDA, COMP2_OUT. Analog: ADC_IN3, OPAMP1_VOUT, COMP1_INP, COMP2_INM. |+| 13 | PA3 | bidirectional | GPIO. Alt: USART2_RX, LPUART_RX, TIM5_CH4, TIM2_CH4, I2C2_SCL, TSC_CH4. Analog: ADC_IN4, COMP1_INP, COMP2_INP, OPAMP1_VINM. |+| 14 | PA4 | bidirectional | GPIO. Alt: USART2_CK, LPUART_TX, I2C1_SCL, SPI1_NSS, I2S1_WS, USART1_TX, TSC_CH5. Analog: DAC_OUT, ADC_IN5, COMP1_INM, COMP2_INM, OPAMP1_VINP, OPAMP2_VINP. |+| 15 | PA5 | bidirectional | GPIO. Alt: SPI1_SCK, I2C1_SDA, I2S1_CK, USART1_RX, TSC_CH6. Analog: ADC_IN6, COMP1/2_INM, OPAMP1/2_VINP. |+| 16 | PA6 | bidirectional | GPIO. Alt: LPUART_CTS, SPI1_MISO, I2S1_MCK, TIM8_BKIN, TIM3_CH1, TIM1_BKIN, COMP2_OUT, TSC_CH23. Analog: ADC_IN7, OPAMP2_VOUT, COMP2_INM/INP. |+| 17 | PA7 | bidirectional | GPIO. Alt: SPI1_MOSI, I2S1_SD, TIM1_CH1N, TIM8_CH1N, TIM3_CH2, COMP2_OUT, TSC_CH20. Analog: ADC_IN8, COMP2_INP, OPAMP1/2_VINP. |+| 18 | PB0 | bidirectional | GPIO. Alt: TIM1_CH2N, TIM3_CH3, TIM8_CH2N, TSC_CH7, UART4_TX. Analog: ADC_IN9, OPAMP2_VOUT, OPAMP2_VINM. |+| 19 | PB1 | bidirectional | GPIO. Alt: LPUART_RTS, TIM1_CH3N, TIM3_CH4, TIM8_CH3N, TSC_CH8, UART4_RX. Analog: ADC_IN10. |+| 20 | PB2 | bidirectional | GPIO. Alt: LPTIM_OUT, TSC_CH9, TIM9_ETR. |+| 21 | PB10 | bidirectional | GPIO. Alt: USART3_TX, LPUART_TX, I2C2_SCL, TIM2_CH3, TSC_CH19. Analog: COMP1_INP. |+| 22 | PB11 | bidirectional | GPIO. Alt: USART3_RX, LPUART_RX, I2C2_SDA, TIM2_CH4, TSC_CH10. |+| 23 | VSS | power_in | Digital ground. |+| 24 | VDD | power_in | Main digital supply. 1.8-3.6 V. Bypass with 100 nF close to the pin. |+| 25 | PB12 | bidirectional | GPIO. Alt: SPI2_NSS, I2S2_WS, I2C2_SMBA, USART3_CK, TIM1_BKIN, LPUART_RTS, TSC_CH11, TIM9_CH1. |+| 26 | PB13 | bidirectional | GPIO. Alt: SPI2_SCK, I2S2_CK, USART3_CTS, I2C2_SCL, LPUART_CTS, TIM1_CH1N, TIM9_CH2, TSC_CH16. |+| 27 | PB14 | bidirectional | GPIO. Alt: SPI2_MISO, I2S2_MCK, TIM1_CH2N, USART3_RTS, I2C2_SDA, LPUART_RTS, TSC_CH12, TIM9_CH3, UART4_TX. Analog: OPAMP2_VINP. |+| 28 | PB15 | bidirectional | GPIO. Alt: UART4_RX, SPI2_MOSI, I2S2_SD, TIM1_CH3N, TIM9_CH4, TSC_CH15. |+| 29 | PA8 | bidirectional | GPIO. Alt: USART1_CK, I2C2_SMBA, TIM1_CH1, I2C2_SDA, SPI1_NSS, I2S1_WS, MCO. Option: WKUP0, TAMP3-RTC. |+| 30 | PA9 | bidirectional | GPIO. Alt: USART1_TX, I2C2_SCL, TIM1_CH2. |+| 31 | PA10 | bidirectional | GPIO. Alt: USART1_RX, I2C2_SDA, SPI1_SCK, SPI2_SCK, I2S1_CK, I2S2_CK, TIM1_CH3. |+| 32 | PA11-USB_DM | bidirectional | USB 2.0 FS Device D- (USB_DM). Also GPIO PA11; alt: USART1_CTS, SPI2_MISO, I2S2_MCK, CAN_RX, TIM1_CH4, COMP1_OUT; analog COMP2_INP. Not fail-safe. |+| 33 | PA12-USB_DP | bidirectional | USB 2.0 FS Device D+ (USB_DP). Also GPIO PA12; alt: USART1_RTS, SPI2_MOSI, I2S2_SD, CAN_TX, TIM1_ETR, COMP2_OUT; analog COMP1_INP. Not fail-safe. |+| 34 | PA13 | bidirectional | SWDIO-JTMS after reset - serial-wire debug data. GPIO alt: SPI2_NSS, I2S2_WS. |+| 35 | VSS | power_in | Digital ground. |+| 36 | VDD | power_in | Main digital supply. 1.8-3.6 V. |+| 37 | PA14 | bidirectional | SWCLK-JTCK after reset - serial-wire debug clock. GPIO alt: USART2_CK, I2C1_SDA, COMP2_OUT. |+| 38 | PA15 | bidirectional | GPIO. Alt: JTDI, USART2_CTS, I2C1_SCL, SPI1_NSS, I2S2_WS, TIM2_CH1, TIM2_ETR. Analog: COMP2_INP. |+| 39 | PB3 | bidirectional | GPIO. Alt: USART2_RTS, SPI1_SCK, I2S1_CK, TIM2_CH2, JTDO-TRACESWO. Analog: COMP1_INP, COMP2_INM. |+| 40 | PB4 | bidirectional | GPIO. Alt: USART2_TX, SPI1_MISO, I2S1_MCK, TIM3_CH1, UART5_TX. Analog: COMP1_INP. |+| 41 | PB5 | bidirectional | GPIO. Alt: USART2_RX, I2C1_SMBA, SPI1_MOSI, I2S1_SD, TIM3_CH2, UART5_RX, LPTIM_IN1. Analog: COMP1_INM. |+| 42 | PB6 | bidirectional | GPIO. Alt: USART1_TX, LPUART_TX, I2C1_SCL, SPI1_NSS, I2S1_WS, TIM1_CH2N, TIM4_CH1, SPI2_SCK, I2S2_CK, LPTIM_ETR, COMP1_OUT. |+| 43 | PB7 | bidirectional | GPIO. Alt: USART1_RX, LPUART_RX, I2C1_SDA, TIM4_CH2, TSC_OUT, LPTIM_IN2, PVD_IN. Analog: COMP2_INP. |+| 44 | PD0-BOOT0 | bidirectional | BOOT0 pin - samples boot mode at reset (0 = user Flash, 1 = system bootloader / SRAM). Doubles as GPIO PD0. Alt: TRACECK. |+| 45 | PB8 | bidirectional | GPIO. Alt: I2C1_SCL, CAN_RX, TIM4_CH3, USART1_TX, UART5_TX, COMP1_OUT. |+| 46 | PB9 | bidirectional | GPIO. Alt: I2C1_SDA, CAN_TX, TIM4_CH4, UART5_RX, COMP2_OUT. |+| 47 | VSS | power_in | Digital ground. |+| 48 | VDD | power_in | Main digital supply. 1.8-3.6 V. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Nations Technologies Inc |+| Package | LQFP-48(7x7) |+| Category | MCU |+| Pins | 48 |++## Ordering variants++- `N32G435CBL7N32G435KBL7`+- `N32G435CBL7N32G435K8Q7`+- `N32G435CBL7`+- `N32G435CBL7N32G435C8L7`+- `N32G435CBL7N32G435RBL7`+- `N32G435CBL7N32G435RBL7-1`++## CAD (KiCad official)++- Symbol: `N32G435CBL7`+- Footprint: `Package_QFP:LQFP-48_7x7mm_P0.5mm`+- 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Nations Technologies Inc datasheet](docs/n32g435cbl7-datasheet.pdf) (81 pp, sha256 `05c5ab9754fa9c4f`, retrieved 2026-08-17, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/n32g435cbl7-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "n32g435cbl7",+  "version": "0.1.0",+  "type": "component",+  "description": "Nations Technologies Inc Microcontrollers (MCU/MPU/SOC), LQFP-48(7x7). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "mcu",+    "n32g435cbl7"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "n32g435cbl7.kicad_sym",+    "n32g435cbl7.kicad_mod",+    "n32g435cbl7.glb",+    "n32g435cbl7.step",+    "n32g435cbl7.lbr",+    "docs/hero.png",+    "docs/n32g435cbl7-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file