← Commit history
my18b20z-15: restore the component block (pinout + model declarations) from this page's own README and symbol
1 file changed
+74−1
page.json+74−1@@ -33,5 +33,78 @@ "author": { "name": "Ray", "email": "[email protected]"+ },+ "component": {+ "mpn": "MY18B20Z-15",+ "manufacturer": "Mysentech",+ "package": "SOP-8",+ "pin_count": 8,+ "category": "Temperature and Humidity Sensor",+ "parts": {+ "symbol": "my18b20z-15.kicad_sym",+ "footprint": "my18b20z-15.kicad_mod",+ "model_3d": "my18b20z-15-etched.glb",+ "model_3d_plain": "my18b20z-15.glb",+ "model_3d_step": "my18b20z-15-etched.step",+ "model_3d_step_plain": "my18b20z-15.step",+ "lbr": "my18b20z-15.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "NC",+ "type": "unconnected",+ "description": "No connect. Leave floating or tie to ground per PCB preference; not internally bonded."+ },+ {+ "number": "2",+ "name": "NC",+ "type": "unconnected",+ "description": "No connect. Leave floating or tie to ground per PCB preference; not internally bonded."+ },+ {+ "number": "3",+ "name": "VDD",+ "type": "power_in",+ "description": "Supply voltage input, 1.8V to 5.5V (absolute max 6.0V). Typical peak current during temperature measurement ~350µA at VDD=5V; standby current 0.2µA typical. For long-cable or multi-drop networks the datasheet recommends ≥3.3V."+ },+ {+ "number": "4",+ "name": "DQ",+ "type": "bidirectional",+ "description": "1-Wire (single-bus) data I/O. Open-drain / three-state; requires an external pull-up (~4.7kΩ typical, 1kΩ recommended for long cables or multi-node buses). Carries reset/presence pulses, ROM and function commands, temperature and configuration data. VIL≈1.46V and VIH≈1.56V at VDD=5V."+ },+ {+ "number": "5",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for supply and 1-Wire signaling. All voltages in the datasheet are referenced to this pin."+ },+ {+ "number": "6",+ "name": "NC",+ "type": "unconnected",+ "description": "No connect. Leave floating or tie to ground per PCB preference; not internally bonded."+ },+ {+ "number": "7",+ "name": "NC",+ "type": "unconnected",+ "description": "No connect. Leave floating or tie to ground per PCB preference; not internally bonded."+ },+ {+ "number": "8",+ "name": "NC",+ "type": "unconnected",+ "description": "No connect. Leave floating or tie to ground per PCB preference; not internally bonded."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ } }-}+}