component
MY18B20LD10
Public Made by Adomby adom
Mysentech Temperature and Humidity Sensor, TO-92L. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
orderable attributes: rebuild .lbr with adom-lbr 2.18.0 so MPN, MANUFACTURER and the distributor part numbers reach <technology> (LCSC_PN C5259250). The published library carried no attributes at all, so a BOM had nothing to buy from. Distributor PNs matched on exact MPN AND corroborating manufacturer.
2 files changed
+12−4
my18b20ld10.lbr+7−1@@ -137,7 +137,13 @@ <connect gate="G$1" pin="DQ" pad="2"/> <connect gate="G$1" pin="VDD" pad="3"/> </connects>- <technologies><technology name=""/></technologies>+ <technologies>+ <technology name="">+ <attribute name="MPN" value="MY18B20LD10" constant="no"/>+ <attribute name="MANUFACTURER" value="Mysentech" constant="no"/>+ <attribute name="LCSC_PN" value="C5259250" constant="no"/>+ </technology>+ </technologies> </device> </devices> </deviceset>
page.json+5−3@@ -26,7 +26,9 @@ "model_3d_step": "my18b20ld10.step", "lbr": "my18b20ld10.lbr" },- "distributor_links": {},+ "distributor_links": {+ "lcsc": "C5259250"+ }, "pins": [ { "number": "1",@@ -38,13 +40,13 @@ "number": "2", "name": "DQ", "type": "bidirectional",- "description": "1-Wire single-bus digital data I/O. Open-drain / three-state, requires an external pull-up resistor (typ. 10 kΩ, or 1 kΩ for long-cable / multi-drop configurations). Carries all command, ROM ID and temperature traffic; can also parasite-power the device on short lines."+ "description": "1-Wire single-bus digital data I/O. Open-drain / three-state, requires an external pull-up resistor (typ. 10 k\u03a9, or 1 k\u03a9 for long-cable / multi-drop configurations). Carries all command, ROM ID and temperature traffic; can also parasite-power the device on short lines." }, { "number": "3", "name": "VDD", "type": "power_in",- "description": "Supply voltage input, 1.8 V to 5.5 V (recommend ≥3.3 V for long-cable or multi-drop operation). Typical standby current 0.2 µA @5 V; average 5 µA @1 Hz sampling."+ "description": "Supply voltage input, 1.8 V to 5.5 V (recommend \u22653.3 V for long-cable or multi-drop operation). Typical standby current 0.2 \u00b5A @5 V; average 5 \u00b5A @1 Hz sampling." } ], "provenance": {