← Commit history
mx25l3206em2i-12g: restore the component block (pinout + model declarations) from this page's own README and symbol
1 file changed
+74−1
page.json+74−1@@ -33,5 +33,78 @@ "author": { "name": "Ray", "email": "[email protected]"+ },+ "component": {+ "mpn": "MX25L3206EM2I-12G",+ "manufacturer": "MXIC Macronix",+ "package": "SOP-8-200mil",+ "pin_count": 8,+ "category": "NOR FLASH",+ "parts": {+ "symbol": "mx25l3206em2i-12g.kicad_sym",+ "footprint": "mx25l3206em2i-12g.kicad_mod",+ "model_3d": "mx25l3206em2i-12g-etched.glb",+ "model_3d_plain": "mx25l3206em2i-12g.glb",+ "model_3d_step": "mx25l3206em2i-12g-etched.step",+ "model_3d_step_plain": "mx25l3206em2i-12g.step",+ "lbr": "mx25l3206em2i-12g.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "CS#",+ "type": "input",+ "description": "Active-low chip select. Drives the device into active mode on a falling edge and returns it to standby (SO High-Z) when held high. Must transition at byte boundaries for write-type commands."+ },+ {+ "number": "2",+ "name": "SO/SIO1",+ "type": "bidirectional",+ "description": "Serial data output in standard 1x SPI mode; becomes bidirectional SIO1 during Dual Output Read (DREAD, opcode 3Bh). Data shifted out on falling SCLK edge in 1x mode."+ },+ {+ "number": "3",+ "name": "WP#",+ "type": "input",+ "description": "Active-low hardware write protect. When SRWD=1 in the status register and WP# is low, the Status Register is protected against WRSR, enabling hardware BP-bit lockdown."+ },+ {+ "number": "4",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference (0V) for all device supplies and signals."+ },+ {+ "number": "5",+ "name": "SI/SIO0",+ "type": "bidirectional",+ "description": "Serial data input in standard 1x SPI mode; becomes bidirectional SIO0 during Dual Output Read. Data is latched on the rising edge of SCLK in 1x mode."+ },+ {+ "number": "6",+ "name": "SCLK",+ "type": "input",+ "description": "Serial clock input. Supports SPI Mode 0 (CPOL=0) and Mode 3 (CPOL=1) up to 86MHz (80MHz in Dual Output mode)."+ },+ {+ "number": "7",+ "name": "HOLD#",+ "type": "input",+ "description": "Active-low hold. When asserted low with CS# low, pauses serial communication without deselecting the device (SO becomes High-Z, SI/SCLK ignored). Tie to VCC through a pull-up if unused."+ },+ {+ "number": "8",+ "name": "VCC",+ "type": "power_in",+ "description": "Single power supply, 2.7V to 3.6V (nominal 3.3V) for read, erase, and program operations. Decouple with a local ceramic capacitor to GND."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ } }-}+}