← Commit history

Initial commit: component/mx25l1606em1i-12g

Ray ·69092633e8 ·
2 files changed +87
README.mdadded+53
@@ -0,0 +1,53 @@+# MX25L1606EM1I-12G++**MXIC Macronix** · NOR FLASH · SOP-8++MX25L1606EM1I-12G from MXIC Macronix, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | CS# | input | Active-low chip select. Enables serial access to the device when driven low; drives the device into standby mode when high. All commands, addresses, and data are latched relative to CS# framing. |+| 2 | SO/SIO1 | bidirectional | Serial data output in standard 1x SPI mode (SO), driven on the falling edge of SCLK. In Dual Output (DREAD, opcode 3Bh) mode this pin operates as SIO1, one of the two data lanes for the doubled read throughput. |+| 3 | WP# | input | Active-low write protect. When SRWD (status register) is set and WP# is low, the status register write (WRSR) is blocked, enabling hardware-protected block protection settings. Tie high if not used. |+| 4 | GND | power_in | Device ground reference (0V) for both core and I/O. |+| 5 | SI/SIO0 | bidirectional | Serial data input in standard 1x SPI mode (SI), sampled on the rising edge of SCLK for opcode/address/data. In Dual Output Read mode this pin becomes SIO0, the second data output lane. |+| 6 | SCLK | input | Serial clock input. Supports SPI Mode 0 and Mode 3. Maximum 86MHz for single I/O reads, 80MHz for dual output reads. |+| 7 | HOLD# | input | Active-low hold input. Pauses serial communication (SO is high-Z and SI/SCLK are ignored) without deselecting the device, allowing the SPI bus to be shared. Tie high if unused. |+| 8 | VCC | power_in | +3V power supply, 2.7V to 3.6V operating range. Decouple with a local 0.1uF ceramic close to the pin. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | MXIC Macronix |+| Package | SOP-8 |+| Category | Memory |+| Pins | 8 |++## Ordering variants++- `MX25L1606EM1I-12G`+- `MX25L1606EM1I-12GM2I-12G`+- `MX25L1606EM1I-12GPI-12G`+- `MX25L1606EM1I-12GZNI-12G`+- `MX25L1606EM1I-12GZUI-12G`+- `MX25L1606EM1I-12GMI-12G`+- `MX25L1606EM1I-12GXCI-12G`++## CAD (KiCad official)++- Symbol: `MX25L1606EM1I-12G`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SOP-8 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [MXIC Macronix datasheet](docs/mx25l1606em1i-12g-datasheet.pdf) (60 pp, sha256 `2b7bf6d131bbca60`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/mx25l1606em1i-12g-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "mx25l1606em1i-12g",+  "version": "0.1.0",+  "type": "component",+  "description": "MXIC Macronix NOR FLASH, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "memory",+    "mx25l1606em1i-12g"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "mx25l1606em1i-12g.kicad_sym",+    "mx25l1606em1i-12g.kicad_mod",+    "mx25l1606em1i-12g.glb",+    "mx25l1606em1i-12g.step",+    "mx25l1606em1i-12g.lbr",+    "docs/hero.png",+    "docs/mx25l1606em1i-12g-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file