component
MX22917T23
Public Made by Adomby adom
Wuxi Maxinmicro Power Distribution Switches, SOT-23-6. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+9−6@@ -32,7 +32,7 @@ "number": "1", "name": "VIN", "type": "power_in",- "description": "Load switch input supply, 1 V to 5.5 V. Source pin of the internal P-channel pass MOSFET. Decouple with input capacitor (typ. 1 \u00b5F) placed close to the pin."+ "description": "Load switch input supply, 1 V to 5.5 V. Source pin of the internal P-channel pass MOSFET. Decouple with input capacitor (typ. 1 µF) placed close to the pin." }, { "number": "2",@@ -44,25 +44,25 @@ "number": "3", "name": "ON", "type": "input",- "description": "Active-high switch control input (MX22917T, non-inverting). Compatible with standard GPIO logic thresholds; VIH \u2248 1.05-1.09 V. A smart pulldown (~750 k\u03a9, RPD) keeps the pin from floating at power-up. Do not leave floating."+ "description": "Active-high switch control input (MX22917T, non-inverting). Compatible with standard GPIO logic thresholds; VIH ≈ 1.05-1.09 V. A smart pulldown (~750 kΩ, RPD) keeps the pin from floating at power-up. Do not leave floating." }, { "number": "4", "name": "CT", "type": "passive",- "description": "Switch slew-rate / turn-on-time control. Connect a capacitor from CT to VIN to slow the VOUT slew rate and lengthen turn-on time; leave floating for fastest turn-on (~120 \u00b5s at 5 V). CT = (Slew Rate) / SR_ON."+ "description": "Switch slew-rate / turn-on-time control. Connect a capacitor from CT to VIN to slow the VOUT slew rate and lengthen turn-on time; leave floating for fastest turn-on (~120 µs at 5 V). CT = (Slew Rate) / SR_ON." }, { "number": "5", "name": "QOD", "type": "passive",- "description": "Quick output discharge pin. When the switch is disabled, VOUT is pulled down through this pin. Three usage modes: (1) external resistor R_QOD between VOUT and QOD sets discharge rate, (2) tie QOD directly to VOUT to use the internal ~150 \u03a9 pulldown (RPD/QOD), or (3) leave floating to disable QOD."+ "description": "Quick output discharge pin. When the switch is disabled, VOUT is pulled down through this pin. Three usage modes: (1) external resistor R_QOD between VOUT and QOD sets discharge rate, (2) tie QOD directly to VOUT to use the internal ~150 Ω pulldown (RPD/QOD), or (3) leave floating to disable QOD." }, { "number": "6", "name": "VOUT", "type": "power_out",- "description": "Load switch output. Drain of the internal P-channel pass MOSFET. Delivers up to 2 A continuous with typical RON = 100 m\u03a9 at VIN = 5 V."+ "description": "Load switch output. Drain of the internal P-channel pass MOSFET. Delivers up to 2 A continuous with typical RON = 100 mΩ at VIN = 5 V." } ], "provenance": {@@ -136,5 +136,8 @@ "docs/mx22917t23-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }