component
MUX36D08IRTVR
Public Made by Adomby adom
Texas Instruments Analog Switches / Multiplexers, TQFN-32-EP(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+70@@ -0,0 +1,70 @@+# MUX36D08IRTVR++**Texas Instruments** · Analog Switches / Multiplexers · TQFN-32-EP(5x5)++MUX36D08IRTVR from Texas Instruments, in a TQFN-32-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | S8B | passive | Source pin 8B of the B-side channel set; can be an input or output. |+| 2 | S7B | passive | Source pin 7B; can be an input or output. |+| 3 | S6B | passive | Source pin 6B; can be an input or output. |+| 4 | S5B | passive | Source pin 5B; can be an input or output. |+| 5 | S4B | passive | Source pin 4B; can be an input or output. |+| 6 | S3B | passive | Source pin 3B; can be an input or output. |+| 7 | S2B | passive | Source pin 2B; can be an input or output. |+| 8 | S1B | passive | Source pin 1B; can be an input or output. |+| 9 | GND | power_in | Ground (0 V) reference for the device. |+| 10 | A2 | input | Digital address line 2 that selects the switch pair when EN is high; address voltage must stay between VSS and VDD. |+| 11 | NC | unconnected | No connect; do not connect. |+| 12 | NC | unconnected | No connect; do not connect. |+| 13 | NC | unconnected | No connect; do not connect. |+| 14 | A1 | input | Digital address line 1 that selects the switch pair when EN is high; address voltage must stay between VSS and VDD. |+| 15 | A0 | input | Digital address line 0 that selects the switch pair when EN is high; address voltage must stay between VSS and VDD. |+| 16 | EN | input | Active high enable; when low all switches are off, and when high the A[2:0] inputs select which pair of switches is on; EN must stay between VSS and VDD. |+| 17 | S1A | passive | Source pin 1A; can be an input or output. |+| 18 | S2A | passive | Source pin 2A; can be an input or output. |+| 19 | S3A | passive | Source pin 3A; can be an input or output. |+| 20 | S4A | passive | Source pin 4A; can be an input or output. |+| 21 | S5A | passive | Source pin 5A; can be an input or output. |+| 22 | S6A | passive | Source pin 6A; can be an input or output. |+| 23 | S7A | passive | Source pin 7A; can be an input or output. |+| 24 | S8A | passive | Source pin 8A; can be an input or output. |+| 25 | VSS | power_in | Negative power supply, the most negative supply potential; can be tied to ground in single-supply use and needs a 0.1 µF to 10 µF decoupling capacitor to GND. |+| 26 | NC | unconnected | No connect; do not connect. |+| 27 | DA | passive | Drain pin A; can be an input or output. |+| 28 | NC | unconnected | No connect; do not connect. |+| 29 | VDD | power_in | Positive power supply, the most positive supply potential; operating range is 10 V to 36 V single supply or ±5 V to ±18 V dual supply, with a 0.1 µF to 10 µF decoupling capacitor to GND. |+| 30 | NC | unconnected | No connect; do not connect. |+| 31 | DB | passive | Drain pin B; can be an input or output. |+| 32 | NC | unconnected | No connect; do not connect. |+| 33 | Thermal Pad | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | TQFN-32-EP(5x5) |+| Category | Communication Interface Chip/UART/485/232 |+| Pins | 33 |++## CAD (KiCad official)++- Symbol: `MUX36D08IRTVR`+- Footprint: `Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm`+- 3D model: TQFN-32-EP(5x5) (KiCad packages3D, STEP)+- 3D model files: `mux36d08irtvr-etched.step` / `mux36d08irtvr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mux36d08irtvr.step` / `mux36d08irtvr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/mux36s16) (52 pp, sha256 `bff3483b07a45fd1`, retrieved 2026-10-08, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/mux36d08irtvr-datasheet.pdf)
page.jsonadded+351@@ -0,0 +1,351 @@+{+ "slug": "mux36d08irtvr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Analog Switches / Multiplexers, TQFN-32-EP(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "communication interface chip-uart-485-232",+ "mux36d08irtvr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "mux36d08irtvr.kicad_sym",+ "mux36d08irtvr.kicad_mod",+ "mux36d08irtvr.glb",+ "mux36d08irtvr.step",+ "mux36d08irtvr.lbr",+ "docs/hero.png",+ "docs/mux36d08irtvr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "mux36d08irtvr-hero.glb",+ "mux36d08irtvr-hero.overlay.json"+ ],+ "component": {+ "mpn": "MUX36D08IRTVR",+ "manufacturer": "Texas Instruments",+ "package": "TQFN-32-EP(5x5)",+ "pin_count": 33,+ "category": "Communication Interface Chip/UART/485/232",+ "subcategory": "Analog Switches / Multiplexers",+ "datasheet": "https://www.ti.com/cn/lit/gpn/mux36s16",+ "parts": {+ "symbol": "mux36d08irtvr.kicad_sym",+ "footprint": "mux36d08irtvr.kicad_mod",+ "model_3d": "mux36d08irtvr-hero.glb",+ "model_3d_plain": "mux36d08irtvr.glb",+ "model_3d_step": "mux36d08irtvr-etched.step",+ "model_3d_step_plain": "mux36d08irtvr.step",+ "lbr": "mux36d08irtvr.lbr"+ },+ "distributor_links": {+ "lcsc": "C2673417",+ "digikey": "296-51472-2-ND",+ "mouser": "595-MUX36D08IRTVR"+ },+ "distributor_check": {+ "checked_at": "2026-10-08T16:04:01Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-51472-2-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-MUX36D08IRTVR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "S8B",+ "type": "passive",+ "description": "Source pin 8B of the B-side channel set; can be an input or output."+ },+ {+ "number": "2",+ "name": "S7B",+ "type": "passive",+ "description": "Source pin 7B; can be an input or output."+ },+ {+ "number": "3",+ "name": "S6B",+ "type": "passive",+ "description": "Source pin 6B; can be an input or output."+ },+ {+ "number": "4",+ "name": "S5B",+ "type": "passive",+ "description": "Source pin 5B; can be an input or output."+ },+ {+ "number": "5",+ "name": "S4B",+ "type": "passive",+ "description": "Source pin 4B; can be an input or output."+ },+ {+ "number": "6",+ "name": "S3B",+ "type": "passive",+ "description": "Source pin 3B; can be an input or output."+ },+ {+ "number": "7",+ "name": "S2B",+ "type": "passive",+ "description": "Source pin 2B; can be an input or output."+ },+ {+ "number": "8",+ "name": "S1B",+ "type": "passive",+ "description": "Source pin 1B; can be an input or output."+ },+ {+ "number": "9",+ "name": "GND",+ "type": "power_in",+ "description": "Ground (0 V) reference for the device."+ },+ {+ "number": "10",+ "name": "A2",+ "type": "input",+ "description": "Digital address line 2 that selects the switch pair when EN is high; address voltage must stay between VSS and VDD."+ },+ {+ "number": "11",+ "name": "NC",+ "type": "unconnected",+ "description": "No connect; do not connect."+ },+ {+ "number": "12",+ "name": "NC",+ "type": "unconnected",+ "description": "No connect; do not connect."+ },+ {+ "number": "13",+ "name": "NC",+ "type": "unconnected",+ "description": "No connect; do not connect."+ },+ {+ "number": "14",+ "name": "A1",+ "type": "input",+ "description": "Digital address line 1 that selects the switch pair when EN is high; address voltage must stay between VSS and VDD."+ },+ {+ "number": "15",+ "name": "A0",+ "type": "input",+ "description": "Digital address line 0 that selects the switch pair when EN is high; address voltage must stay between VSS and VDD."+ },+ {+ "number": "16",+ "name": "EN",+ "type": "input",+ "description": "Active high enable; when low all switches are off, and when high the A[2:0] inputs select which pair of switches is on; EN must stay between VSS and VDD."+ },+ {+ "number": "17",+ "name": "S1A",+ "type": "passive",+ "description": "Source pin 1A; can be an input or output."+ },+ {+ "number": "18",+ "name": "S2A",+ "type": "passive",+ "description": "Source pin 2A; can be an input or output."+ },+ {+ "number": "19",+ "name": "S3A",+ "type": "passive",+ "description": "Source pin 3A; can be an input or output."+ },+ {+ "number": "20",+ "name": "S4A",+ "type": "passive",+ "description": "Source pin 4A; can be an input or output."+ },+ {+ "number": "21",+ "name": "S5A",+ "type": "passive",+ "description": "Source pin 5A; can be an input or output."+ },+ {+ "number": "22",+ "name": "S6A",+ "type": "passive",+ "description": "Source pin 6A; can be an input or output."+ },+ {+ "number": "23",+ "name": "S7A",+ "type": "passive",+ "description": "Source pin 7A; can be an input or output."+ },+ {+ "number": "24",+ "name": "S8A",+ "type": "passive",+ "description": "Source pin 8A; can be an input or output."+ },+ {+ "number": "25",+ "name": "VSS",+ "type": "power_in",+ "description": "Negative power supply, the most negative supply potential; can be tied to ground in single-supply use and needs a 0.1 µF to 10 µF decoupling capacitor to GND."+ },+ {+ "number": "26",+ "name": "NC",+ "type": "unconnected",+ "description": "No connect; do not connect."+ },+ {+ "number": "27",+ "name": "DA",+ "type": "passive",+ "description": "Drain pin A; can be an input or output."+ },+ {+ "number": "28",+ "name": "NC",+ "type": "unconnected",+ "description": "No connect; do not connect."+ },+ {+ "number": "29",+ "name": "VDD",+ "type": "power_in",+ "description": "Positive power supply, the most positive supply potential; operating range is 10 V to 36 V single supply or ±5 V to ±18 V dual supply, with a 0.1 µF to 10 µF decoupling capacitor to GND."+ },+ {+ "number": "30",+ "name": "NC",+ "type": "unconnected",+ "description": "No connect; do not connect."+ },+ {+ "number": "31",+ "name": "DB",+ "type": "passive",+ "description": "Drain pin B; can be an input or output."+ },+ {+ "number": "32",+ "name": "NC",+ "type": "unconnected",+ "description": "No connect; do not connect."+ },+ {+ "number": "33",+ "name": "Thermal Pad",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: Package hint was TQFN-32-EP(5x5). The datasheet calls this package WQFN (RTV), 32-pin, 5.00 mm x 5.0; The datasheet shows a thermal pad on the WQFN package but gives it no pin number in the excerpt. It ; The datasheet does not give an ERC type for the analog S and D pins. They are described as 'analog i",+ "exposed pad 33 added from the footprint"+ ],+ "pages_sent": 11,+ "cost_usd": 0.0873,+ "at": "2026-10-08T16:03:40"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/mux36s16",+ "pages": 52,+ "sha256": "bff3483b07a45fd1",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 33,+ "described": 33,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "mux36d08irtvr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 5,+ 5,+ 0.875+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "5fa713ea46b36980895812ed853577889b7cb06d275041a39b99bc0be305dc79",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "mux36d08irtvr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 5,+ 5,+ 0.875+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "883e782151acf42252e898815f90c26845ad45bdeb2565aeb0f4a125168695af",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}