← Commit history
page.json+8−5@@ -32,7 +32,7 @@ "number": "1", "name": "IP+", "type": "passive",- "description": "Input current positive pin. Terminal of the internal 1.2 m\u03a9 (typ) primary current conductor. Pins 1 and 2 must be shorted together on the PCB to carry the sensed current into the device."+ "description": "Input current positive pin. Terminal of the internal 1.2 mΩ (typ) primary current conductor. Pins 1 and 2 must be shorted together on the PCB to carry the sensed current into the device." }, { "number": "2",@@ -62,19 +62,19 @@ "number": "6", "name": "FILTER", "type": "passive",- "description": "Filter pin to set signal bandwidth. Connect an external capacitor CFILTER to GND to lower the -3 dB corner frequency (fc = 1/(2\u03c0\u00b7RF\u00b7CFILTER), RF(int) \u2248 1.8 k\u03a9). Reducing bandwidth reduces noise but proportionally increases response time."+ "description": "Filter pin to set signal bandwidth. Connect an external capacitor CFILTER to GND to lower the -3 dB corner frequency (fc = 1/(2π·RF·CFILTER), RF(int) ≈ 1.8 kΩ). Reducing bandwidth reduces noise but proportionally increases response time." }, { "number": "7", "name": "VOUT", "type": "output",- "description": "Analog output signal proportional to the sensed primary current. Ratiometric to VCC: quiescent output = VCC\u00d70.5 at IP=0 A; sensitivity is 40 mV/A on the -50BR5 (\u00b150 A range), swinging 2.5 V\u00b12 V over full scale. Drives loads \u22654.7 k\u03a9; VOL\u22640.3 V, VOH\u2265VCC-0.3 V."+ "description": "Analog output signal proportional to the sensed primary current. Ratiometric to VCC: quiescent output = VCC×0.5 at IP=0 A; sensitivity is 40 mV/A on the -50BR5 (±50 A range), swinging 2.5 V±2 V over full scale. Drives loads ≥4.7 kΩ; VOL≤0.3 V, VOH≥VCC-0.3 V." }, { "number": "8", "name": "VCC", "type": "power_in",- "description": "Power supply, 5 V nominal (4.5-5.5 V range). Typical ICC = 14 mA (max 20 mA). Requires a 0.1 \u00b5F bypass capacitor to GND close to the pin."+ "description": "Power supply, 5 V nominal (4.5-5.5 V range). Typical ICC = 14 mA (max 20 mA). Requires a 0.1 µF bypass capacitor to GND close to the pin." } ], "provenance": {@@ -172,5 +172,8 @@ "docs/mt9223ct-50br5-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }