component
MT9223CT-30UR5
Public Made by Adomby adom
Magn Tek Current Sensors, SOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+8−5@@ -32,7 +32,7 @@ "number": "1", "name": "IP+", "type": "passive",- "description": "Input current positive terminal (primary conductor). Pins 1 and 2 are shorted together externally. Part of the low-resistance (~1.2 m\u03a9) primary conduction path electrically isolated from the signal side."+ "description": "Input current positive terminal (primary conductor). Pins 1 and 2 are shorted together externally. Part of the low-resistance (~1.2 mΩ) primary conduction path electrically isolated from the signal side." }, { "number": "2",@@ -62,19 +62,19 @@ "number": "6", "name": "FILTER", "type": "passive",- "description": "External filter capacitor pin used to set the output bandwidth. Cutoff frequency fc = 1/(2*pi*RF*CFILTER), with internal filter resistance RF(int) ~1.8 k\u03a9 typ. Reducing bandwidth improves noise but increases response time."+ "description": "External filter capacitor pin used to set the output bandwidth. Cutoff frequency fc = 1/(2*pi*RF*CFILTER), with internal filter resistance RF(int) ~1.8 kΩ typ. Reducing bandwidth improves noise but increases response time." }, { "number": "7", "name": "VOUT", "type": "output",- "description": "Analog output signal proportional to sensed primary current. For the -30UR5 (unidirectional) variant: VOQ = 0.5V at IP=0A, output swings 0.5V to 4.5V for 0..+30A with sensitivity 133.3 mV/A. Ratiometric to VCC. VOL max 0.3V, VOH min VCC-0.3V into RL >= 4.7 k\u03a9."+ "description": "Analog output signal proportional to sensed primary current. For the -30UR5 (unidirectional) variant: VOQ = 0.5V at IP=0A, output swings 0.5V to 4.5V for 0..+30A with sensitivity 133.3 mV/A. Ratiometric to VCC. VOL max 0.3V, VOH min VCC-0.3V into RL >= 4.7 kΩ." }, { "number": "8", "name": "VCC", "type": "power_in",- "description": "Positive supply voltage input. Nominal 5.0V (4.5V-5.5V range). ICC typ 14 mA, 20 mA max. A 0.1 \u00b5F CBYPASS capacitor between VCC and GND is required."+ "description": "Positive supply voltage input. Nominal 5.0V (4.5V-5.5V range). ICC typ 14 mA, 20 mA max. A 0.1 µF CBYPASS capacitor between VCC and GND is required." } ], "provenance": {@@ -172,5 +172,8 @@ "docs/mt9223ct-30ur5-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }