← Commit history
page.json+7−4@@ -38,7 +38,7 @@ "number": "2", "name": "OVP", "type": "input",- "description": "Output over-voltage protection setting pin with enable function. A resistor RSET to GND sets the OVP threshold (VOVP = 8.6\u00b7L\u00b7RSET/RCS). If pin voltage falls below the enable threshold (VOVP_EN typ 0.3 V, VOVP_SD typ 0.27 V) the output is shut down; leaving the pin floating disables OVP. RSET should be > 3 k\u03a9 in normal use."+ "description": "Output over-voltage protection setting pin with enable function. A resistor RSET to GND sets the OVP threshold (VOVP = 8.6·L·RSET/RCS). If pin voltage falls below the enable threshold (VOVP_EN typ 0.3 V, VOVP_SD typ 0.27 V) the output is shut down; leaving the pin floating disables OVP. RSET should be > 3 kΩ in normal use." }, { "number": "3",@@ -56,7 +56,7 @@ "number": "5", "name": "DRAIN", "type": "power_out",- "description": "Drain of the internal 500V high-voltage power MOSFET (BVDSS = 500 V). Pin 5 and pin 6 are tied to the same internal drain node. MT7714SH RDS(on) typ 2.5 \u03a9 at VGS=10 V / IDS=1.5 A."+ "description": "Drain of the internal 500V high-voltage power MOSFET (BVDSS = 500 V). Pin 5 and pin 6 are tied to the same internal drain node. MT7714SH RDS(on) typ 2.5 Ω at VGS=10 V / IDS=1.5 A." }, { "number": "6",@@ -68,7 +68,7 @@ "number": "7", "name": "CS", "type": "input",- "description": "Current-sense input. Connect a sense resistor RCS to GND; internal comparator trips at VCS-TH = 400 mV (typ, 388-412 mV) to terminate the on-cycle. Sets LED current: ILED \u2248 VCS-TH/(2\u00b7RCS). 350 ns leading-edge blanking. Absolute max -0.3 V to 6 V."+ "description": "Current-sense input. Connect a sense resistor RCS to GND; internal comparator trips at VCS-TH = 400 mV (typ, 388-412 mV) to terminate the on-cycle. Sets LED current: ILED ≈ VCS-TH/(2·RCS). 350 ns leading-edge blanking. Absolute max -0.3 V to 6 V." } ], "provenance": {@@ -132,5 +132,8 @@ "docs/mt7714sh-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }