← Commit history

Initial commit: component/mt7282

Ray ·20e1da6109 ·
2 files changed +79
README.mdadded+45
@@ -0,0 +1,45 @@+# MT7282++**MAXIC Tech** · LED Drivers · ESOP-8++MT7282 from MAXIC Tech, in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | COMP | output | Error amplifier output / loop compensation node. Connect a small ceramic capacitor (e.g. 22nF) from this pin to GND to stabilize the current-mode control loop. |+| 2 | ADJ | input | Single-pin dimming / enable control input. Accepts either an analog voltage (analog dimming of LED current) or a PWM signal up to 10kHz for PWM dimming of the LED current. |+| 3 | OVP | input | Externally adjustable over-voltage protection sense input. Connect a resistor divider (e.g. RB1=200k / RB2=10k) from the LED output rail to program the OVP trip threshold. |+| 4 | GND | power_in | Device ground. Reference for internal regulator, compensation network, and OVP divider return. |+| 5 | SW | output | Switch node - drain of the internal 0.2Ω power NMOS. Connects to the switching inductor and (for boost/buck-boost) to the freewheel Schottky diode (e.g. SS34). Handles high dV/dt; keep trace short. |+| 6 | VDD | power_out | Internal LDO output for gate drive and control circuitry. Bypass to GND with a ~1µF ceramic capacitor (Cdd). Not intended to source external load current. |+| 7 | VIN | power_in | Chip input supply, 2.5V to 40V. Provides bias to the internal LDO and reference; bypass close to pin with a low-ESR ceramic capacitor. |+| 8 | CS | input | High-side current-sense input. Connect an external sense resistor (Rcs) between VIN and CS to program the average LED current; the internal 200mV low-side reference sets I_LED = 0.2V / Rcs. |+| EP | EP | passive | Exposed thermal pad on the underside of the ESOP-8 package. Solder to a large ground copper area for heat dissipation; electrically tie to GND. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | MAXIC Tech |+| Package | ESOP-8 |+| Category | LED-drv |+| Pins | 9 |++## CAD (KiCad official)++- Symbol: `MT7282`+- Footprint: `Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm`+- 3D model: ESOP-8 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [MAXIC Tech datasheet](docs/mt7282-datasheet.pdf) (1 pp, sha256 `4ff4d274254e3aab`, retrieved 2026-08-17, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/mt7282-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "mt7282",+  "version": "0.1.0",+  "type": "component",+  "description": "MAXIC Tech LED Drivers, ESOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "led-drv",+    "mt7282"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "mt7282.kicad_sym",+    "mt7282.kicad_mod",+    "mt7282.glb",+    "mt7282.step",+    "mt7282.lbr",+    "docs/hero.png",+    "docs/mt7282-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file