← Commit history

Initial commit: component/mt6825gt-eed

Ray ·281fdf2106 ·
2 files changed +102
README.mdadded+68
@@ -0,0 +1,68 @@+# MT6825GT-EED++**Magn Tek** · Position Sensor · TSSOP-16++MT6825GT-EED from Magn Tek, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | U | output | Incremental U-phase output (UVW mode) or complementary -A output (ABZ differential mode). Push-pull digital output, VOH = VDD-0.25 V @ 2 mA, VOL = 0.25 V. Function selected by internal register / factory configuration. |+| 2 | V | output | Incremental V-phase output (UVW mode) or complementary -B output (ABZ differential mode). Push-pull digital output. |+| 3 | W | output | Incremental W-phase output (UVW mode) or complementary -Z output (ABZ differential mode). Push-pull digital output. |+| 4 | HVPP | power_in | MTP (multi-time-programmable EPROM) programming supply. Requires 7.0-7.2 V (max 8 V abs) only during MTP programming; tie directly to GND in normal operation. Reference circuit uses 1 µF to GND when the MTP programming interface is provided. |+| 5 | MISO | output | SPI data line, slave-out/master-in. Active in 4-wire SPI mode; unused (leave floating or tie appropriately) in 3-wire SPI mode where MOSI/SDAT becomes bidirectional. |+| 6 | MOSI/SDAT | bidirectional | SPI data line. In 4-wire SPI this is MOSI (master-out/slave-in, input); in 3-wire SPI this becomes SDAT, a bidirectional data pin used for both command and readback. |+| 7 | SCK | input | SPI clock input. Digital input with VIH ≥ 0.7·VDD, VIL ≤ 0.3·VDD. |+| 8 | CSN | input | SPI chip-select (active low). Has an internal pull-down (ILK spec references CSN internal pull-down resistor). |+| 9 | VDD | power_in | Main supply, 3.0-5.5 V (typical 3.3-5.0 V). Absolute max 6.5 V. Supply current Idd typ 10 mA, max 15 mA. Decouple with 0.1 µF and TVS(6 V) per reference circuit. |+| 10 | OUT | output | 12-bit absolute angle PWM output. Programmable frequency, typ 971.1 Hz or 485.6 Hz (±8%), rise/fall ≤ 1 µs into 1 nF load. Available simultaneously with ABZ/UVW/SPI. |+| 11 | TEST | input | Factory test pin, for MagnTek internal use only. Leave unconnected (or tie to GND) in customer applications. |+| 12 | VSS | power_in | Ground reference (0 V). |+| 13 | ERROR | output | Error/alarm interrupt output. Asserts on internal error detection (e.g. magnetic-field out-of-range). Push-pull digital output. |+| 14 | Z | output | Incremental Z index output; one pulse per mechanical revolution marking the 0° reference. Programmable pulse width (1, 2, 4, 8, 12, 16 LSB or 180°) and programmable zero position. |+| 15 | B | output | Incremental quadrature B output. Programmable 1-4096 pulses/rev; on -EED variant factory-set to 4096 PPR. B leads/lags A depending on rotation direction and ROT_DIR register. |+| 16 | A | output | Incremental quadrature A output. Programmable 1-4096 pulses/rev (4096 on -EED). Maximum A/B frequency 1.024 MHz (INL degrades above 2 MHz). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Magn Tek |+| Package | TSSOP-16 |+| Category | Sensor |+| Pins | 16 |++## Ordering variants++- `MT6825GT-EEDGT-STD`+- `MT6825GT-EEDGT-PP1`+- `MT6825GT-EEDGT-LL1`+- `MT6825GT-EEDGT-LLD`+- `MT6825GT-EEDGT-M4D`+- `MT6825GT-EEDGT-M4V`+- `MT6825GT-EEDGT-M5D`+- `MT6825GT-EEDGT-M5V`+- `MT6825GT-EEDGT-MMD`+- `MT6825GT-EEDGT-QQ1`+- `MT6825GT-EED`+- `MT6825GT-EEDGT-M4F`+- `MT6825GT-EEDGT-M5VF`++## CAD (KiCad official)++- Symbol: `MT6825GT-EED`+- Footprint: `Package_SO:TSSOP-16_4.4x5mm_P0.65mm`+- 3D model: TSSOP-16 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Magn Tek datasheet](docs/mt6825gt-eed-datasheet.pdf) (31 pp, sha256 `640d4a1385071ca9`, retrieved 2026-08-17, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/mt6825gt-eed-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "mt6825gt-eed",+  "version": "0.1.0",+  "type": "component",+  "description": "Magn Tek Position Sensor, TSSOP-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "sensor",+    "mt6825gt-eed"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "mt6825gt-eed.kicad_sym",+    "mt6825gt-eed.kicad_mod",+    "mt6825gt-eed.glb",+    "mt6825gt-eed.step",+    "mt6825gt-eed.lbr",+    "docs/hero.png",+    "docs/mt6825gt-eed-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file