← Commit history

Set visibility: public

Ray ·ca4cc28be7 · ·parent eff55e2
1 file changed +8−5
page.json+8−5
@@ -32,7 +32,7 @@         "number": "1",         "name": "SW",         "type": "output",-        "description": "Power switch output; drain of the internal NMOS power switch (RDS(on) \u2248 0.5\u03a9, 1.5A current limit). Connect the boost inductor and Schottky rectifier diode here. SW can swing between GND and 28V."+        "description": "Power switch output; drain of the internal NMOS power switch (RDS(on) ≈ 0.5Ω, 1.5A current limit). Connect the boost inductor and Schottky rectifier diode here. SW can swing between GND and 28V."       },       {         "number": "2",@@ -44,19 +44,19 @@         "number": "3",         "name": "FB",         "type": "input",-        "description": "Feedback input to the internal error amplifier. Internal reference is 1.23V for the MT3540-F23 variant. Set the output voltage with an external resistor divider from VOUT to FB to GND: VOUT = 1.23V \u00d7 (1 + R1/R2). Input bias current \u2248 -10 nA (typ)."+        "description": "Feedback input to the internal error amplifier. Internal reference is 1.23V for the MT3540-F23 variant. Set the output voltage with an external resistor divider from VOUT to FB to GND: VOUT = 1.23V × (1 + R1/R2). Input bias current ≈ -10 nA (typ)."       },       {         "number": "4",         "name": "EN",         "type": "input",-        "description": "Regulator on/off control input. Drive high (VIH \u2265 1.5V) to enable the converter, low (VIL \u2264 0.4V) to shut it down (IQ \u2248 0.1\u00b5A). Tie to VIN for automatic startup. Absolute maximum -0.3V to 6V."+        "description": "Regulator on/off control input. Drive high (VIH ≥ 1.5V) to enable the converter, low (VIL ≤ 0.4V) to shut it down (IQ ≈ 0.1µA). Tie to VIN for automatic startup. Absolute maximum -0.3V to 6V."       },       {         "number": "5",         "name": "VIN",         "type": "power_in",-        "description": "Input supply pin, 2.5V to 5.5V operating range (6V absolute max). Must be locally bypassed with a low-ESR ceramic capacitor (\u22651\u00b5F, X5R/X7R recommended) placed close to the pin."+        "description": "Input supply pin, 2.5V to 5.5V operating range (6V absolute max). Must be locally bypassed with a low-ESR ceramic capacitor (≥1µF, X5R/X7R recommended) placed close to the pin."       }     ],     "provenance": {@@ -120,5 +120,8 @@     "docs/mt3540-f23-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ]+  ],+  "visibility": {+    "public": true+  } }\ No newline at end of file