← Commit history
README.md+14@@ -33,6 +33,20 @@ MT3540-F23 from Aerosemi, in a SOT-23-5. Pinout and pin descriptions extracted f - Footprint: `Package_TO_SOT_SMD:SOT-23-5` - 3D model: SOT-23-5 (KiCad packages3D, STEP) +## 3D model downloads++Two STEP files. Same geometry, different body top:++| File | Size | Use it when |+|---|---|---|+| [`mt3540-f23.step`](mt3540-f23.step) | 85 KB | You want the bare part, or you mark your own boards. |+| [`mt3540-f23-etched.step`](mt3540-f23-etched.step) | 1.9 MB | You want the part with `MT3540-F23` already on it. |++The marking in the etched file is real recessed geometry cut into the solid, not a+texture or a decal: 461 faces against 102 in the bare model. It+survives export, section views, and rendering in any CAD tool, and it drops straight+into KiCad or Fusion with no extra setup.+ ## Provenance Data extracted from the manufacturer datasheet, not a distributor listing:
package.json+1−1@@ -1,6 +1,6 @@ { "slug": "mt3540-f23",- "version": "0.1.0",+ "version": "0.2.0", "type": "component", "description": "Aerosemi DC-DC Converters, SOT-23-5. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "tags": [
page.json+9−9@@ -4,7 +4,7 @@ "slug": "mt3540-f23", "title": "MT3540-F23", "brief": "Aerosemi DC-DC Converters, SOT-23-5. Datasheet-verified pinout, KiCad symbol/footprint/3D.",- "version": "0.1.0",+ "version": "0.2.0", "license": "CC-BY-SA-4.0", "tags": [ "component",@@ -34,7 +34,7 @@ "number": "1", "name": "SW", "type": "output",- "description": "Power switch output; drain of the internal NMOS power switch (RDS(on) \u2248 0.5\u03a9, 1.5A current limit). Connect the boost inductor and Schottky rectifier diode here. SW can swing between GND and 28V."+ "description": "Power switch output; drain of the internal NMOS power switch (RDS(on) ≈ 0.5Ω, 1.5A current limit). Connect the boost inductor and Schottky rectifier diode here. SW can swing between GND and 28V." }, { "number": "2",@@ -46,19 +46,19 @@ "number": "3", "name": "FB", "type": "input",- "description": "Feedback input to the internal error amplifier. Internal reference is 1.23V for the MT3540-F23 variant. Set the output voltage with an external resistor divider from VOUT to FB to GND: VOUT = 1.23V \u00d7 (1 + R1/R2). Input bias current \u2248 -10 nA (typ)."+ "description": "Feedback input to the internal error amplifier. Internal reference is 1.23V for the MT3540-F23 variant. Set the output voltage with an external resistor divider from VOUT to FB to GND: VOUT = 1.23V × (1 + R1/R2). Input bias current ≈ -10 nA (typ)." }, { "number": "4", "name": "EN", "type": "input",- "description": "Regulator on/off control input. Drive high (VIH \u2265 1.5V) to enable the converter, low (VIL \u2264 0.4V) to shut it down (IQ \u2248 0.1\u00b5A). Tie to VIN for automatic startup. Absolute maximum -0.3V to 6V."+ "description": "Regulator on/off control input. Drive high (VIH ≥ 1.5V) to enable the converter, low (VIL ≤ 0.4V) to shut it down (IQ ≈ 0.1µA). Tie to VIN for automatic startup. Absolute maximum -0.3V to 6V." }, { "number": "5", "name": "VIN", "type": "power_in",- "description": "Input supply pin, 2.5V to 5.5V operating range (6V absolute max). Must be locally bypassed with a low-ESR ceramic capacitor (\u22651\u00b5F, X5R/X7R recommended) placed close to the pin."+ "description": "Input supply pin, 2.5V to 5.5V operating range (6V absolute max). Must be locally bypassed with a low-ESR ceramic capacitor (≥1µF, X5R/X7R recommended) placed close to the pin." } ], "provenance": {@@ -132,9 +132,9 @@ "docs/hero.png", "docs/mt3540-f23-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"+ "viewers/footprint.html",+ "pads.json" ],- "visibility": {- "public": true- }+ "visibility": "public",+ "description": "Aerosemi DC-DC Converters, SOT-23-5. Datasheet-verified pinout, KiCad symbol/footprint/3D." }