← Commit history
README.mdadded+76@@ -0,0 +1,76 @@+# MSP430I2040TRHBR++**Texas Instruments** · Microcontrollers (MCU/MPU/SOC) · VQFN-32-EP(5x5)++MSP430I2040TRHBR from Texas Instruments, in a VQFN-32-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | A0.0+ | input | SD24 positive analog input channel A0.0 (differential PGA input). Short unused analog input pairs together and connect to analog ground (AVSS). |+| 2 | A0.0- | input | SD24 negative analog input channel A0.0 (differential PGA input). |+| 3 | A1.0+ | input | SD24 positive analog input channel A1.0 (differential PGA input). |+| 4 | A1.0- | input | SD24 negative analog input channel A1.0 (differential PGA input). |+| 5 | A2.0+ | input | SD24 positive analog input channel A2.0 (differential PGA input). |+| 6 | A2.0- | input | SD24 negative analog input channel A2.0 (differential PGA input). |+| 7 | A3.0+ | input | SD24 positive analog input channel A3.0 (differential PGA input). |+| 8 | A3.0- | input | SD24 negative analog input channel A3.0 (differential PGA input). |+| 9 | VREF | passive | SD24 external reference voltage input. When SD24 operates with internal reference (SD24REFS=1), leave VREF unloaded except for the recommended C_VREF decoupling capacitor to AVSS. |+| 10 | AVSS | power_in | Analog supply voltage negative terminal (analog ground). |+| 11 | ROSC | passive | External resistor pin for the DCO. In external-resistor mode, connect the recommended resistor between ROSC and AVSS; in internal-resistor mode, tie ROSC to AVSS. |+| 12 | DVSS | power_in | Digital supply voltage negative terminal (digital ground). TI recommends bonding the RHB package thermal pad to DVSS. |+| 13 | VCC | power_in | Analog and digital supply voltage positive terminal. Operating range 2.2 V to 3.6 V. |+| 14 | VCORE | passive | Regulated 1.8 V core supply output (internal use only, no external current loading). Connect only the recommended C_VCORE decoupling capacitor. |+| 15 | RST/NMI/SBWTDIO | bidirectional | Reset or non-maskable interrupt input; also Spy-Bi-Wire test data input/output for device programming and debug. Terminate with a 47 kohm pullup to VCC and 10 nF (or 2.2 nF) pulldown. |+| 16 | TEST/SBWTCK | input | Selects JTAG test mode on pins P1.0-P1.3 and serves as the Spy-Bi-Wire test clock input for device programming and debug. Has an internal pulldown. |+| 17 | P1.0/UCA0STE/MCLK/TCK | bidirectional | GPIO P1.0; alternate functions eUSCI_A0 SPI slave-transmit-enable, MCLK output, and JTAG test clock (TCK) for programming/debug. |+| 18 | P1.1/UCA0CLK/SMCLK/TMS | bidirectional | GPIO P1.1; alternate functions eUSCI_A0 clock, SMCLK output, and JTAG test-mode select (TMS). |+| 19 | P1.2/UCA0RXD/UCA0SOMI/ACLK/TDI/TCLK | bidirectional | GPIO P1.2; eUSCI_A0 UART RXD or SPI slave-out/master-in, ACLK output, and JTAG TDI / TCLK for programming/debug. |+| 20 | P1.3/UCA0TXD/UCA0SIMO/TA0CLK/TDO/TDI | bidirectional | GPIO P1.3; eUSCI_A0 UART TXD or SPI slave-in/master-out, Timer_A0 external clock (TACLK), and JTAG TDO / TDI programming pin. |+| 21 | P1.4/UCB0STE/TA0.0 | bidirectional | GPIO P1.4; eUSCI_B0 SPI slave-transmit-enable and Timer_A0 CCR0 capture (CCI0A) / compare (Out0). |+| 22 | P1.5/UCB0CLK/TA0.1 | bidirectional | GPIO P1.5; eUSCI_B0 clock and Timer_A0 CCR1 capture (CCI1A) / compare (Out1). |+| 23 | P1.6/UCB0SCL/UCB0SOMI/TA0.2 | bidirectional | GPIO P1.6; eUSCI_B0 I2C clock (SCL) or SPI slave-out/master-in, and Timer_A0 CCR2 capture (CCI2A) / compare (Out2). |+| 24 | P1.7/UCB0SDA/UCB0SIMO/TA1CLK | bidirectional | GPIO P1.7; eUSCI_B0 I2C data (SDA) or SPI slave-in/master-out, and Timer_A1 external clock (TACLK). |+| 25 | P2.0/TA1.0/CLKIN | bidirectional | GPIO P2.0; Timer_A1 CCR0 capture (CCI0A) / compare (Out0); DCO bypass clock input (CLKIN). |+| 26 | P2.1/TA1.1 | bidirectional | GPIO P2.1; Timer_A1 CCR1 capture (CCI1A) / compare (Out1). |+| 27 | P2.2/TA1.2 | bidirectional | GPIO P2.2; Timer_A1 CCR2 capture (CCI2A) / compare (Out2). |+| 28 | P2.3/VMONIN | bidirectional | GPIO P2.3; also voltage monitor analog input (VMONIN) for the supply voltage monitor. |+| 29 | P2.4/TA1.0 | bidirectional | GPIO P2.4; Timer_A1 CCR0 capture (CCI0B) / compare (Out0). Available only on the RHB package. |+| 30 | P2.5/TA0.0 | bidirectional | GPIO P2.5; Timer_A0 CCR0 capture (CCI0B) / compare (Out0). Available only on the RHB package. |+| 31 | P2.6/TA0.1 | bidirectional | GPIO P2.6; Timer_A0 CCR1 compare (Out1). Available only on the RHB package. |+| 32 | P2.7/TA0.2 | bidirectional | GPIO P2.7; Timer_A0 CCR2 compare (Out2). Available only on the RHB package. |+| 33 | EP | power_in | Exposed thermal pad on the underside of the RHB VQFN package. TI recommends connecting the thermal pad to DVSS. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | VQFN-32-EP(5x5) |+| Category | MCU |+| Pins | 33 |++## Ordering variants++- `MSP430I2040TRHBR`+- `MSP430I2040TRHBRTRHBT`+- `MSP430I2040TRHBRTPW`+- `MSP430I2040TRHBRTPWR`++## CAD (KiCad official)++- Symbol: `MSP430I2040TRHBR`+- Footprint: `Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm`+- 3D model: VQFN-32-EP(5x5) (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/msp430i2040trhbr.pdf) (81 pp, sha256 `e9594c89ece53373`, retrieved 2026-08-17, tier: manufacturer)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/msp430i2040trhbr-datasheet.pdf)
page.jsonadded+34@@ -0,0 +1,34 @@+{+ "slug": "msp430i2040trhbr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Microcontrollers (MCU/MPU/SOC), VQFN-32-EP(5x5). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "mcu",+ "msp430i2040trhbr"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "msp430i2040trhbr.kicad_sym",+ "msp430i2040trhbr.kicad_mod",+ "msp430i2040trhbr.glb",+ "msp430i2040trhbr.step",+ "msp430i2040trhbr.lbr",+ "docs/hero.png",+ "docs/msp430i2040trhbr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "visibility": "public",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}