← Commit history

Initial commit: component/msp430g2212ipw20r

Ray ·bdac847642 ·
2 files changed +98
README.mdadded+64
@@ -0,0 +1,64 @@+# MSP430G2212IPW20R++**Texas Instruments** · Microcontrollers (MCU/MPU/SOC) · TSSOP-20++MSP430G2212IPW20R from Texas Instruments, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | DVCC | power_in | Digital supply voltage. Operating range 1.8 V to 3.6 V referenced to DVSS. Decouple locally with a 100 nF ceramic capacitor to DVSS. |+| 2 | P1.0/TA0CLK/ACLK/CA0 | bidirectional | General-purpose digital I/O with interrupt and configurable pull-up/pull-down. Muxed with Timer0_A external clock input TACLK, ACLK signal output, and Comparator_A+ channel CA0. |+| 3 | P1.1/TA0.0/CA1 | bidirectional | General-purpose digital I/O with interrupt and configurable pull-up/pull-down. Muxed with Timer0_A capture CCI0A input / compare Out0 output and Comparator_A+ channel CA1. |+| 4 | P1.2/TA0.1/CA2 | bidirectional | General-purpose digital I/O with interrupt and configurable pull-up/pull-down. Muxed with Timer0_A capture CCI1A input / compare Out1 output and Comparator_A+ channel CA2. |+| 5 | P1.3/CAOUT/CA3 | bidirectional | General-purpose digital I/O with interrupt and configurable pull-up/pull-down. Muxed with Comparator_A+ output CAOUT and Comparator_A+ channel CA3. |+| 6 | P1.4/SMCLK/TA0.2/CA4/TCK | bidirectional | General-purpose digital I/O with interrupt and pull-up/pull-down. Muxed with SMCLK signal output, Timer0_A capture CCI2A input / compare Out2 output, Comparator_A+ channel CA4, and JTAG TCK. |+| 7 | P1.5/TA0.0/SCLK/CA5/TMS | bidirectional | General-purpose digital I/O with interrupt and pull-up/pull-down. Muxed with Timer0_A compare Out0, USI clock (SCLK: input in I2C mode, in/output in SPI mode), Comparator_A+ channel CA5, and JTAG TMS. |+| 8 | P2.0 | bidirectional | General-purpose digital I/O with interrupt capability and configurable pull-up/pull-down resistor. |+| 9 | P2.1 | bidirectional | General-purpose digital I/O with interrupt capability and configurable pull-up/pull-down resistor. |+| 10 | P2.2 | bidirectional | General-purpose digital I/O with interrupt capability and configurable pull-up/pull-down resistor. |+| 11 | P2.3 | bidirectional | General-purpose digital I/O with interrupt capability and configurable pull-up/pull-down resistor. |+| 12 | P2.4 | bidirectional | General-purpose digital I/O with interrupt capability and configurable pull-up/pull-down resistor. |+| 13 | P2.5 | bidirectional | General-purpose digital I/O with interrupt capability and configurable pull-up/pull-down resistor. |+| 14 | P1.6/TA0.1/SDO/SCL/CA6/TDI/TCLK | bidirectional | General-purpose digital I/O with interrupt and pull-up/pull-down. Muxed with Timer0_A compare Out1, USI SDO (SPI data output), USI SCL (I2C clock), Comparator_A+ channel CA6, and JTAG TDI/TCLK. |+| 15 | P1.7/SDI/SDA/CAOUT/CA7/TDO/TDI | bidirectional | General-purpose digital I/O with interrupt and pull-up/pull-down. Muxed with USI SDI (SPI data input), USI SDA (I2C data), Comparator_A+ output CAOUT, Comparator_A+ channel CA7, and JTAG TDO/TDI. |+| 16 | RST/NMI/SBWTDIO | input | Active-low reset input; also serves as non-maskable interrupt (NMI) input and as the Spy-Bi-Wire data I/O (SBWTDIO) during programming/debug. Requires an external pull-up resistor (typ. 47 kΩ) plus a small capacitor to DVSS for reliable reset. |+| 17 | TEST/SBWTCK | input | Selects JTAG test mode for Port 1 pins; the device protection fuse is connected to TEST. Also serves as the Spy-Bi-Wire test clock input (SBWTCK) during programming and debug. |+| 18 | XOUT/P2.7 | bidirectional | Crystal oscillator output for a 32 kHz watch crystal on LFXT1; alternately usable as GPIO P2.7. |+| 19 | XIN/P2.6/TA0.1 | bidirectional | Crystal oscillator input for LFXT1 (32 kHz watch crystal) or external digital clock source; alternately usable as GPIO P2.6 or Timer0_A compare Out1. |+| 20 | DVSS | power_in | Digital ground reference (0 V). Connect to the board ground plane with a low-inductance path. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | TSSOP-20 |+| Category | Embedded Processors & Controllers |+| Pins | 20 |++## Ordering variants++Same part, different packaging or reel option.++- `MSP430G2212IPW20R`+- `MSP430G2212IPW20RIN20`+- `MSP430G2212IPW20RIPW14`+- `MSP430G2212IPW20RIRSA16`++## CAD (KiCad official)++- Symbol: `MSP430G2212IPW20R`+- Footprint: `Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm`+- 3D model: TSSOP-20 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/msp430g2452) (None pp, sha256 `4a95b55c77e49dbf`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/msp430g2212ipw20r-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "msp430g2212ipw20r",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Microcontrollers (MCU/MPU/SOC), TSSOP-20. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "embedded processors & controllers",+    "msp430g2212ipw20r"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "msp430g2212ipw20r.kicad_sym",+    "msp430g2212ipw20r.kicad_mod",+    "msp430g2212ipw20r.glb",+    "msp430g2212ipw20r.step",+    "msp430g2212ipw20r.lbr",+    "docs/hero.png",+    "docs/msp430g2212ipw20r-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file